+ Post new Ad
KITAGAWA CNC LATHE MODEL VARIANT TURN, US $5,500.00 – Picture 0
KITAGAWA CNC LATHE MODEL VARIANT TURN, US $5,500.00 – Picture 1
KITAGAWA CNC LATHE MODEL VARIANT TURN, US $5,500.00 – Picture 2
KITAGAWA CNC LATHE MODEL VARIANT TURN, US $5,500.00 – Picture 3
KITAGAWA CNC LATHE MODEL VARIANT TURN, US $5,500.00 – Picture 4
KITAGAWA CNC LATHE MODEL VARIANT TURN, US $5,500.00 – Picture 5
KITAGAWA CNC LATHE MODEL VARIANT TURN, US $5,500.00 – Picture 0
KITAGAWA CNC LATHE MODEL VARIANT TURN, US $5,500.00 – Picture 1
KITAGAWA CNC LATHE MODEL VARIANT TURN, US $5,500.00 – Picture 2
KITAGAWA CNC LATHE MODEL VARIANT TURN, US $5,500.00 – Picture 3
KITAGAWA CNC LATHE MODEL VARIANT TURN, US $5,500.00 – Picture 4
KITAGAWA CNC LATHE MODEL VARIANT TURN, US $5,500.00 – Picture 5

Kitagawa Cnc Lathe Model Variant Turn

US $5,500.00

  • Denver, Colorado, United States
  • Jan 30th
Open on mobile:
QR code
USED KITAGAWA CNC LATHE MODEL VARIANT TURN General Specifications :  Max. Swing : 24.02" Chuck Size : 10" Max. Daimeter : 10" Max. Work Length : 25.2" Center Distance : 31.9" Spindle Bore : 2.5/8" Spindle Speeds : 28-2500 RPM Travels :              X-Axis : 8.6"              Z-Axis : 26" Turret Stations : 12 Complete With : Motor & Controls Fanuc 10T Controller Tool Holders on the Turret 10" 3-Jaw Chuck(Special Jaws) FOB Colorado Note We Do Not Take Paypal For Payment   
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Manufacturer Kitagawa

Directions

Similar products from Lathe Chucks

MILWAUKEE TOOTH ANCHOR CHUCK KIT MULTI- BIT SET

MILWAUKEE TOOTH ANCHOR CHUCK KIT MULTI- BIT SET

  • Spring Hill, Florida, United States
  • Jan 30th
8"Soft jaws 1.5x60? in Aluminum 6061T6 for Kitagawa,Howa type Free Shipping

8"Soft jaws 1.5x60? in Aluminum 6061T6 for Kitagawa,Howa type Free Shipping

  • Cupertino, California, United States
  • Jan 30th
Machinist tool, metal lathe chuck with 5C shank,5C chuck

Machinist tool, metal lathe chuck with 5C shank,5C chuck

  • Bennington, New Hampshire, United States
  • Jan 30th
Chandox 8" , 1.5P Soft Chuck Jaws

Chandox 8" , 1.5P Soft Chuck Jaws

  • Abingdon, Maryland, United States
  • Jan 30th
ER 32 Collet Chuck Smith Tool 1-1/16" Dia Acme Threaded Shank (my-ID-1B2)

ER 32 Collet Chuck Smith Tool 1-1/16" Dia Acme Threaded Shank (my-ID-1B2)

  • Hendersonville, Tennessee, United States
  • Jan 30th
8" HOWA / HITACHI SEIKI HA6-8-46 CNC HYDRAULIC POWER LATHE CHUCK A2-6 MOUNT

8" HOWA / HITACHI SEIKI HA6-8-46 CNC HYDRAULIC POWER LATHE CHUCK A2-6 MOUNT

  • Cleveland, Ohio, United States
  • Jan 30th
Gibraltar - Manual Lathe Chucks - Type: Self-Centering Nominal - Size: 10"

Gibraltar - Manual Lathe Chucks - Type: Self-Centering Nominal - Size: 10"

  • Ogden, Utah, United States
  • Jan 30th
NEW 8 " 3 JAW LATHE CHUCK 0312

NEW 8 " 3 JAW LATHE CHUCK 0312

  • Montville, Ohio, United States
  • Jan 30th
NICE SMW AUTOBLOK KSZ-AZ-42 POWER OPERATED COLLET CHUCK CNC LATHE A5 MOUNT

NICE SMW AUTOBLOK KSZ-AZ-42 POWER OPERATED COLLET CHUCK CNC LATHE A5 MOUNT

  • Cleveland, Ohio, United States
  • Jan 30th
Kanetsu Electro-Magnetic Chuck

Kanetsu Electro-Magnetic Chuck

  • Louisville, Kentucky, United States
  • Jan 30th
NEW 6 INCH LATHE 4 INCH 3 JAW CHUCK+REV JAWS+KEY 1-8 THREAD FITS ATLAS CRAFTSMAN

NEW 6 INCH LATHE 4 INCH 3 JAW CHUCK+REV JAWS+KEY 1-8 THREAD FITS ATLAS CRAFTSMAN

  • Niles, Michigan, United States
  • Jan 30th
No. 11-20 Blanchard Rotary Surface Grinder - Grinding

No. 11-20 Blanchard Rotary Surface Grinder - Grinding

  • Libertyville, Illinois, United States
  • Jan 30th
4" Landis Double Head Bolt Threader - Model 32C - with 32R Lanco Heads

4" Landis Double Head Bolt Threader - Model 32C - with 32R Lanco Heads

  • Libertyville, Illinois, United States
  • Jan 30th
BROWN & SHARPE NO. 00 MINIATURE DRILL CHUCK - FOR LATHE? - BELT DRIVE

BROWN & SHARPE NO. 00 MINIATURE DRILL CHUCK - FOR LATHE? - BELT DRIVE

  • Foster, Rhode Island, United States
  • Jan 30th
KITAGAWA B-210 3 JAW 10" CHUCK

KITAGAWA B-210 3 JAW 10" CHUCK

  • Bristol, Connecticut, United States
  • Jan 30th
8 INCH 4-JAW D1-4 LATHE CHUCK CAMLOCK (3900-4808)

8 INCH 4-JAW D1-4 LATHE CHUCK CAMLOCK (3900-4808)

  • Chino, California, United States
  • Jan 30th
12 INCH 4-JAW D1-6 LATHE CHUCK (D-M) CAMLOCK (3900-4809)

12 INCH 4-JAW D1-6 LATHE CHUCK (D-M) CAMLOCK (3900-4809)

  • Chino, California, United States
  • Jan 30th
Jacobs 91 C6 Rubberflex Spindle Nose W/Collets

Jacobs 91 C6 Rubberflex Spindle Nose W/Collets

  • Pleasant Prairie, Wisconsin, United States
  • Jan 30th
8" JAWS T NUT 3 PCS SET CNC LATHE CHUCK T-NUTS 3 SETS

8" JAWS T NUT 3 PCS SET CNC LATHE CHUCK T-NUTS 3 SETS

  • Alvada, Ohio, United States
  • Jan 30th
DRILL PRESS LATHE AUGER BIT CHUCK Thread 1-8 vintage tool 287e

DRILL PRESS LATHE AUGER BIT CHUCK Thread 1-8 vintage tool 287e

  • Dearborn, Michigan, United States
  • Jan 30th

People who viewed this item also vieved

SPI GROUND PRECISSION ANGLE PLATE 8" X 8"

SPI GROUND PRECISSION ANGLE PLATE 8" X 8"

  • Glassboro, New Jersey, United States
  • May 29th
Phase ll Collet Spin Fixture Stock # 225-204 Serial # S-0333

Phase ll Collet Spin Fixture Stock # 225-204 Serial # S-0333

  • Coventry, Rhode Island, United States
  • May 29th
Starrett No 191 Jack Screw VINTAGE with original box USA

Starrett No 191 Jack Screw VINTAGE with original box USA

  • O'Fallon, Missouri, United States
  • May 29th
Schaublin ESX-32-20 Collet

Schaublin ESX-32-20 Collet

  • Peoria, Illinois, United States
  • May 31st
Hardinge Collet 2" EDC 5C

Hardinge Collet 2" EDC 5C

  • Halls, Tennessee, United States
  • May 31st
HARDINGE 1-3/4" STEP 5C COLLET FOR LATHE MILL MACHINIST

HARDINGE 1-3/4" STEP 5C COLLET FOR LATHE MILL MACHINIST

  • Chino, California, United States
  • May 31st
J.H.Williams No 408 Deep Throat C Clamp 8 1/4" Opening Drop Forged USA~(lot C)

J.H.Williams No 408 Deep Throat C Clamp 8 1/4" Opening Drop Forged USA~(lot C)

  • Freehold, New Jersey, United States
  • Jun 1st
Lot of 2 Pro-Flex CSST 3/4", 1", 1-1/4" Bonding Clamp PFBC-CDEC FREE SHIPPING

Lot of 2 Pro-Flex CSST 3/4", 1", 1-1/4" Bonding Clamp PFBC-CDEC FREE SHIPPING

  • Lake Elmo, Minnesota, United States
  • Jun 1st
VINTAGE !!! Werkheiser parallel clamp/machinist!

VINTAGE !!! Werkheiser parallel clamp/machinist!

  • Bethlehem, Pennsylvania, United States
  • Jun 1st
Very Large Lathe Center Morse Taper 6?

Very Large Lathe Center Morse Taper 6?

  • Morgantown, Pennsylvania, United States
  • Jun 1st
live center

live center

  • Anaheim, California, United States
  • Jun 1st
Morse 4 Taper Carbide Tipped Dead Centers

Morse 4 Taper Carbide Tipped Dead Centers

  • Plainville, Connecticut, United States
  • Jun 1st
Irwin 3" Clamp On Vise with Magnetic Jaw bumpers

Irwin 3" Clamp On Vise with Magnetic Jaw bumpers

  • Arlington, Virginia, United States
  • Jun 2nd
KURT 3600V CNC MACHINE VISE

KURT 3600V CNC MACHINE VISE

  • Boynton Beach, Florida, United States
  • Jun 2nd
Machinist Rotational Bench Vise - 2 1/2" Adjustable Jaws - 3 1/2" Fully Open

Machinist Rotational Bench Vise - 2 1/2" Adjustable Jaws - 3 1/2" Fully Open

  • Wilmette, Illinois, United States
  • Jun 2nd
Northwestern Machinist Step Blocks 2-S & 1-S

Northwestern Machinist Step Blocks 2-S & 1-S

  • Cherry Hill, New Jersey, United States
  • Jun 9th
Northwestern Machinist Step Blocks 2-S / 2 Pairs

Northwestern Machinist Step Blocks 2-S / 2 Pairs

  • Cherry Hill, New Jersey, United States
  • Jun 9th
Northwestern Machinist Step Blocks 3-S Pair

Northwestern Machinist Step Blocks 3-S Pair

  • Cherry Hill, New Jersey, United States
  • Jun 9th
Yuasa SUDX 220 4th Axis Rotary Table Bras Worm Wheel Gear

Yuasa SUDX 220 4th Axis Rotary Table Bras Worm Wheel Gear

  • Keller, Texas, United States
  • Jun 13th
Machinist Screw Jack Set (MT-02)

Machinist Screw Jack Set (MT-02)

  • Waterbury, Connecticut, United States
  • Jun 13th
CARROLL & SON 11” Dividing Head Model D-140SK w/ 6” Chuck & 5” Dividing Plate

CARROLL & SON 11” Dividing Head Model D-140SK w/ 6” Chuck & 5” Dividing Plate

  • Euclid, Ohio, United States
  • Jun 14th
KEARNEY TRECKER 12” Dividing Head w/ 9" Chuck, Tailstock & 9” Dividing Plate

KEARNEY TRECKER 12” Dividing Head w/ 9" Chuck, Tailstock & 9” Dividing Plate

  • Euclid, Ohio, United States
  • Jun 14th
4 Sets of 6 Pair of NEW Enco Parallels 1/8 x 6 inches long 1/2 to 1-5/8 tall!

4 Sets of 6 Pair of NEW Enco Parallels 1/8 x 6 inches long 1/2 to 1-5/8 tall!

  • Troy, Missouri, United States
  • Jun 14th
Hydraulic 2 jaw self centering chuck

Hydraulic 2 jaw self centering chuck

  • Mark, Illinois, United States
  • Jun 14th
eCraft Replacement Blades 10/Pkg-

eCraft Replacement Blades 10/Pkg-

  • Hickory Hills, Illinois, United States
  • Jun 19th
"Skinneeez Extreme 3 Squeaker Stuffing Free Dog Toy 25""-Crocodile"

"Skinneeez Extreme 3 Squeaker Stuffing Free Dog Toy 25""-Crocodile"

  • Hickory Hills, Illinois, United States
  • Jun 19th
"IndigoBlu Paper Stack 190gsm Cardstock 12""X12"" 12/Pkg-Floral Vignettes"

"IndigoBlu Paper Stack 190gsm Cardstock 12""X12"" 12/Pkg-Floral Vignettes"

  • Hickory Hills, Illinois, United States
  • Jun 19th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies