Kiwi Electronics KEDC1224 8 point Relay output card, US $120.00 – Picture 0

Kiwi Electronics KEDC1224 8 point Relay output card, US $120.00 – Picture 1

Kiwi Electronics Kedc1224 8 Point Relay Output Card

US $120.00

Hot Springs National Park, Arkansas, United States
Jan 29th

Open on mobile:
QR code

The KEDC-1224 was designed as a relay controlled indicator unit. Input is from a magnetic switch mounted near a screw conveyor shaft with a magnet mounted on it. As the screw turns the magnet passes near the switch which in-turn closes the relay. The relay in the instance this unit was used to flash a light, so a person monitoring the conveyors can quickly see that all 8 conveyors are running from one place. The uses for this device are not limited to flashing a light. They could be connected to a counter, or to a PLC that then notifies someone that a particular conveyor has stopped. Our primary need was to provide a cheap reproduce-able control device. It is a self contained low voltage device with its own DC power-supply built into the board, so that anybody can mount the device and connect it This unit is powered with 12VDC, for the relay coils and for the Magnetic switch voltage. We can supply just the board as shown in the photograph, or mount the unit in a small control cabinet with water-tight cord grips, and all the magnetic switches and magnets. The flexibilty of this unit allows us to off it in 4 different voltages and either a SPST (NO) relay or a DPDT (NO/NC) relay. The board size is approx 6" by 3" so it will fit into any cabinet from 8"x*8 and up. Use the following specifications when ordering a unit. KEDC1224-A1 -- 5VDC relays SPST(NO) contact KEDC1224-A2 -- 5VDC relays DPDT (NO/NC) contact KEDC1224-B1 -- 12VDC relays SPST(NO) contact KEDC1224-B2 -- 12VDC relays DPDT (NO/NC) contact KEDC1224-C1 -- 24VDC relays SPST(NO) contact KEDC1224-C2 -- 24VDC relays DPDT (NO/NC) contact KEDC1224-D1 -- 110VAC relays SPST(NO) contact KEDC1224-D2 -- 110VAC relays DPDT (NO/NC) contact The listed price is for the control board only and doesn't include and of the magnetic pickups or cabinet. We can supply these, and would be more than happy to quote a price for these, or any combination of parts.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Model	KEDC1224
Brand	Kiwi Electronics