+ Post new Ad
Kool Mist unit with gal of mist concentrate, US $61 – Picture 0
Kool Mist unit with gal of mist concentrate, US $61 – Picture 0

Kool Mist Unit With Gal Of Mist Concentrate

US $61

  • Brookfield, Connecticut, United States
  • Jun 1st
Open on mobile:
QR code
 Here's a used Kool Mist unit with an almost full gallon of the mist concentrate.  A note with the unit says it pulses so it may need a new  hose or a cleaning to get it back to 100%.

Directions

Similar products from Coolant Gun Drills

A880 D1312LX38-03 SANDVIK CoroDrill

A880 D1312LX38-03 SANDVIK CoroDrill

  • Windsor, Connecticut, United States
  • Jun 1st
880 D2500L25-02 SANDVIK CoroDrill

880 D2500L25-02 SANDVIK CoroDrill

  • Windsor, Connecticut, United States
  • Jun 1st
Titex Plus HSS Drills 2 are 17.5 MM and 1 is 19/32 New in cases

Titex Plus HSS Drills 2 are 17.5 MM and 1 is 19/32 New in cases

  • Hampstead, Maryland, United States
  • Jun 1st
New! Drills SGS- 53119. Ser 103 Drill 19/64

New! Drills SGS- 53119. Ser 103 Drill 19/64

  • Rock Hill, South Carolina, United States
  • Jun 1st
New! Dream YG1 0151CTF 5XD With Coolant Holes 15/64x15/64x1-57/64x3-15/16

New! Dream YG1 0151CTF 5XD With Coolant Holes 15/64x15/64x1-57/64x3-15/16

  • Rock Hill, South Carolina, United States
  • Jun 1st
New! Dream Drills YG1 DH404063 0631DTF 6.3x70 10082371

New! Dream Drills YG1 DH404063 0631DTF 6.3x70 10082371

  • Rock Hill, South Carolina, United States
  • Jun 1st
New! YG1 Carbide 07595 4F SRW-4005. 5/8x5/8x1-1/4x3-1/2

New! YG1 Carbide 07595 4F SRW-4005. 5/8x5/8x1-1/4x3-1/2

  • Rock Hill, South Carolina, United States
  • Jun 1st
New! Niagara Cutter 61721 6/42x3/16x9/16x2 3F SE 35 RH w/RAD UNC. End Mill

New! Niagara Cutter 61721 6/42x3/16x9/16x2 3F SE 35 RH w/RAD UNC. End Mill

  • Rock Hill, South Carolina, United States
  • Jun 1st
5 Piece Lot of Tapered Shank Drills etc.

5 Piece Lot of Tapered Shank Drills etc.

  • Southbridge, Massachusetts, United States
  • Jun 1st
CARBIDE DRLL DREAM Coolant 6.3 X 8.0 X53 X 91 DH408063

CARBIDE DRLL DREAM Coolant 6.3 X 8.0 X53 X 91 DH408063

  • New Bedford, Massachusetts, United States
  • Jun 1st
DCN 0236-118-050R-5D ISCAR Indexable Drill

DCN 0236-118-050R-5D ISCAR Indexable Drill

  • Windsor, Connecticut, United States
  • Jun 1st
CJT Koolcarb 108901 Extra Length Carbide Tipped Coolant Fed Drill Bit Size .4219

CJT Koolcarb 108901 Extra Length Carbide Tipped Coolant Fed Drill Bit Size .4219

  • Farmington, Missouri, United States
  • Jun 1st
KENNAMETAL B269A08334HP KCPK15 21/64 .328 THRU COOLANT CARBIDE DRILL LONG

KENNAMETAL B269A08334HP KCPK15 21/64 .328 THRU COOLANT CARBIDE DRILL LONG

  • Wichita, Kansas, United States
  • Jun 1st
CJT/Koolcarb - coolant feeding - carbide tipped drill 1/2"

CJT/Koolcarb - coolant feeding - carbide tipped drill 1/2"

  • McKee, Kentucky, United States
  • Jun 1st
2 ELDORADO GUN DRILLS 6INCH LONG .386DIA 3/4SHANK PERFECT FOR CNC APLICATIONS

2 ELDORADO GUN DRILLS 6INCH LONG .386DIA 3/4SHANK PERFECT FOR CNC APLICATIONS

  • Eastlake, Ohio, United States
  • Jun 1st
Widia Top Drill M1 Body TDM0591R8SCF075 (0.5906-0.6299) (16mm)

Widia Top Drill M1 Body TDM0591R8SCF075 (0.5906-0.6299) (16mm)

  • New Britain, Connecticut, United States
  • Jun 1st
ElDorado PCC Specialty Products Starcut .6250 X 60" GunDrill Carbide Tip Coolant

ElDorado PCC Specialty Products Starcut .6250 X 60" GunDrill Carbide Tip Coolant

  • East Earl, Pennsylvania, United States
  • Jun 1st
SANDVIK COROMANT R840-1600-30-A1A 1220 Coolant Fed Drill, 12.8mm Carbide

SANDVIK COROMANT R840-1600-30-A1A 1220 Coolant Fed Drill, 12.8mm Carbide

  • Murphy, North Carolina, United States
  • Jun 1st
RELTON 01G-NRT Rapid Tap Cutting and Drilling Fluid - 1 Gallon

RELTON 01G-NRT Rapid Tap Cutting and Drilling Fluid - 1 Gallon

  • Joliet, Illinois, United States
  • Jun 1st
OIL HOLE COOLANT THRU DRILL (.4375) 7/16" HSS STR SHANK TAPER LENGTH

OIL HOLE COOLANT THRU DRILL (.4375) 7/16" HSS STR SHANK TAPER LENGTH

  • Cleveland, Ohio, United States
  • Jun 1st

People who viewed this item also vieved

18" Extension Drill Bit Aircraft Size #40 -.098" HSS

18" Extension Drill Bit Aircraft Size #40 -.098" HSS

  • Goddard, Kansas, United States
  • Jan 30th
18" Extension Drill Bit Size #10 HSS 5 each

18" Extension Drill Bit Size #10 HSS 5 each

  • Goddard, Kansas, United States
  • Jan 30th
USA PRECISION TWIST DRILL CO. HEAVY-DUTY TAPER LENGTH 19/32 Bit NIB! MADE IN USA

USA PRECISION TWIST DRILL CO. HEAVY-DUTY TAPER LENGTH 19/32 Bit NIB! MADE IN USA

  • Winnebago, Illinois, United States
  • Jan 30th
AMEC 1-1/16" T.A Spade Drill Insert 152A-0102 Super Cobalt Tialn

AMEC 1-1/16" T.A Spade Drill Insert 152A-0102 Super Cobalt Tialn

  • Houston, Texas, United States
  • Jan 30th
HSS SPOTTING DRILL 5/8" X 60 DEGREES NWT USA

HSS SPOTTING DRILL 5/8" X 60 DEGREES NWT USA

  • San Antonio, Texas, United States
  • Jan 30th
1-3/16" T.A Spade Drill Insert 433T-0126

1-3/16" T.A Spade Drill Insert 433T-0126

  • Houston, Texas, United States
  • Jan 30th
OSG 215-1520 Screw Mach Drill,SS,Carbide

OSG 215-1520 Screw Mach Drill,SS,Carbide

  • Canton, Ohio, United States
  • Jan 30th
Center Drills # 6

Center Drills # 6

  • Kailua Kona, Hawaii, United States
  • Jan 30th
1" Screw Machine Drill 971 HSS USA 6" OAL

1" Screw Machine Drill 971 HSS USA 6" OAL

  • Milton Freewater, Oregon, United States
  • Jan 30th
35 MIXED HARVEY CARBIDE TOOLING, 14020, 18745, 72018

35 MIXED HARVEY CARBIDE TOOLING, 14020, 18745, 72018

  • Euclid, Ohio, United States
  • Jan 30th
WALTER TITEX A3378TML-0.5 Micro Twist Drill Solid Carbide Machinist Precision

WALTER TITEX A3378TML-0.5 Micro Twist Drill Solid Carbide Machinist Precision

  • Yorktown, Virginia, United States
  • Jan 30th
RESHARPENED 1/2" STRAIGHT SHANK CHUCKING REAMER .500" HSS

RESHARPENED 1/2" STRAIGHT SHANK CHUCKING REAMER .500" HSS

  • Fairfield, Iowa, United States
  • Jan 30th
18 NOS Cleveland Twist Drill Co High Speed Taper Shank Drill~9/32"~Cle-Forge~

18 NOS Cleveland Twist Drill Co High Speed Taper Shank Drill~9/32"~Cle-Forge~

  • Indiana, Pennsylvania, United States
  • Jan 30th
17 NOS Cleveland Twist Drill Co High Speed Taper Shank Drill~3/8"~Cle-Forge~

17 NOS Cleveland Twist Drill Co High Speed Taper Shank Drill~3/8"~Cle-Forge~

  • Indiana, Pennsylvania, United States
  • Jan 30th
7 NOS Cleveland Twist Drill Co High Speed Taper Shank Drill~5/16"~Cle-Forge~

7 NOS Cleveland Twist Drill Co High Speed Taper Shank Drill~5/16"~Cle-Forge~

  • Indiana, Pennsylvania, United States
  • Jan 30th
Jobber Drill Set 13Pc HSS 118 Deg NIB (A55)

Jobber Drill Set 13Pc HSS 118 Deg NIB (A55)

  • Springfield, Illinois, United States
  • Feb 12th
NEW 25/64 DIA HSS MORSE TAPER #2 OIL / COOLANT THRU DRILL BIT TOOLING SHOP

NEW 25/64 DIA HSS MORSE TAPER #2 OIL / COOLANT THRU DRILL BIT TOOLING SHOP

  • Xenia, Ohio, United States
  • Feb 12th
"ATM" Twist Drill Bits # 65 Lot of 12 Pcs

"ATM" Twist Drill Bits # 65 Lot of 12 Pcs

  • Coventry, Rhode Island, United States
  • Feb 12th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies