+ Post new Ad
Kurt© D810 Workholding 8" Anglock® D-Series Vise, US $1,400.00 – Picture 0
Kurt© D810 Workholding 8" Anglock® D-Series Vise, US $1,400.00 – Picture 1
Kurt© D810 Workholding 8" Anglock® D-Series Vise, US $1,400.00 – Picture 2
Kurt© D810 Workholding 8" Anglock® D-Series Vise, US $1,400.00 – Picture 3
Kurt© D810 Workholding 8" Anglock® D-Series Vise, US $1,400.00 – Picture 4
Kurt© D810 Workholding 8" Anglock® D-Series Vise, US $1,400.00 – Picture 5
Kurt© D810 Workholding 8" Anglock® D-Series Vise, US $1,400.00 – Picture 0
Kurt© D810 Workholding 8" Anglock® D-Series Vise, US $1,400.00 – Picture 1
Kurt© D810 Workholding 8" Anglock® D-Series Vise, US $1,400.00 – Picture 2
Kurt© D810 Workholding 8" Anglock® D-Series Vise, US $1,400.00 – Picture 3
Kurt© D810 Workholding 8" Anglock® D-Series Vise, US $1,400.00 – Picture 4
Kurt© D810 Workholding 8" Anglock® D-Series Vise, US $1,400.00 – Picture 5

Kurt© D810 Workholding 8" Anglock® D-series Vise

US $1,400.00

  • Montville, Ohio, United States
  • Jan 30th
Open on mobile:
QR code
F    O    R      S   A   L   E  Kurt D810 Work-holding Vise The original Kurt Anglock D-Series vises are designed for precision part clamping on basic machine tools such as knee-type mills, grinders and machining centers. DSeries vises are ideal for use in running production parts where datums, flatness and parallelism is important. You can precision bore, tap, drill, grind and finish with high accuracy on most parts made of die cast aluminum, steel, and iron in your Kurt Anglock vises. No other brand can give you the time proven accuracy of the Kurt Anglock vises. All Kurt vises have a friction reducing, needle bearing, thrust collar. The needle bearing increases jaw clamping pressure. Features of All D-Series Vises Include: • AngLock design assures the movable jaw does not lift. • Hardened vise bed. • Hardened jaw plates. • Semi-hard steel screw. • 80,000-PSI ductile iron body. Kurt’s new D810 features a new updated body style: • Quick Set-up feature. • Top down, four bolt design on the stationary jaw reduces vise deflection by 25 percent while allowing total disassembly of the vise without removing the body from the machine table. Special brush seals shield and protect vise screw threads from machined chips and residue. • The nut has been shortened so as not to protrude past the end of the vise body. New powder coat paint finish resists coolant-induced peeling for greater corrosion protection. The overall vise footprint is identical to earlier models so both can be used interchangeably and in tandem. • With a jaw opening of 10" and clamping force up to 11,600 lbs., the D810 vise locks parts precisely including very large parts for aggressive “hogging out” operations. MADE IN USA Click HERE for more information about ANGLOCK D-Series Vises. Click Here to view the D810 Manual directly from Kurt!
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer Kurt
MPN D810
Brand Kurt
Country of Manufacture United States
Model D810

Directions

Similar products from Grips & Tongs

Columbian D4 D54 Vise Woodworking Metalworking 4" Anvil Free SHIPPING

Columbian D4 D54 Vise Woodworking Metalworking 4" Anvil Free SHIPPING

  • Saint Charles, Missouri, United States
  • Jan 30th
WOW!! WILTON #1260 VERTI-LOCK MILLING MILL MACHINE VISE - 6" X 1-3/4" JAWS

WOW!! WILTON #1260 VERTI-LOCK MILLING MILL MACHINE VISE - 6" X 1-3/4" JAWS

  • Chino, California, United States
  • Jan 30th
NICE VINTAGE LAKESIDE SM. SWIVEL TABLE VICE MADE IN USA

NICE VINTAGE LAKESIDE SM. SWIVEL TABLE VICE MADE IN USA

  • Wofford Heights, California, United States
  • Jan 30th
Industrial Record Vise No 25 150mm Mechanic Engineer Metalworking England

Industrial Record Vise No 25 150mm Mechanic Engineer Metalworking England

  • Tonawanda, New York, United States
  • Jan 30th
Spare handle for 6 " milling vise

Spare handle for 6 " milling vise

  • Chino, California, United States
  • Jan 30th
3 Inch 2-Way Cross Slide Vise Heavy-Duty-NEW

3 Inch 2-Way Cross Slide Vise Heavy-Duty-NEW

  • Chino, California, United States
  • Jan 30th
NEW 5 C Collet Stop With Tips FITS ALL COLLET CHUCKS

NEW 5 C Collet Stop With Tips FITS ALL COLLET CHUCKS

  • Columbus, Ohio, United States
  • Jan 30th
MACHINIST MILL LATHE Small Micro Wilton Baby Bullet Vise on Swivel Stand 2" Jaw

MACHINIST MILL LATHE Small Micro Wilton Baby Bullet Vise on Swivel Stand 2" Jaw

  • Morris Plains, New Jersey, United States
  • Jan 30th
USED PALMGREN MILLING DRILL PRESS VISE

USED PALMGREN MILLING DRILL PRESS VISE

  • San Bernardino, California, United States
  • Jan 30th
VINTAGE COLUMBIAN SWIVEL BENCH VISE D43 1/2 M4

VINTAGE COLUMBIAN SWIVEL BENCH VISE D43 1/2 M4

  • Easton, Pennsylvania, United States
  • Jan 30th
Palmgren milling vise Model: 9626603 6.125 wide kurt usa list $390.00 new

Palmgren milling vise Model: 9626603 6.125 wide kurt usa list $390.00 new

  • Denver, Pennsylvania, United States
  • Jan 30th
Yankee 4" Drill Press Vise; model 994

Yankee 4" Drill Press Vise; model 994

  • Sicklerville, New Jersey, United States
  • Jan 30th
Wheeler-Rex 13020 2" Hinged Pipe Vise

Wheeler-Rex 13020 2" Hinged Pipe Vise

  • Wayland, Michigan, United States
  • Jan 30th
SOUTH BEND LATHE NAMEPLATE, 1-3/8" or 2-7/16" Diameter NEW Brass Name Plate

SOUTH BEND LATHE NAMEPLATE, 1-3/8" or 2-7/16" Diameter NEW Brass Name Plate

  • Jacksonville, Florida, United States
  • Jan 30th
Snap Jaws 8MIJ-250 !55D! MFR >15lbs

Snap Jaws 8MIJ-250 !55D! MFR >15lbs

  • Saint Louis, Missouri, United States
  • Jan 30th
24" Long Jaw 4" Digital Electronic Calipers TIR 0.0005”

24" Long Jaw 4" Digital Electronic Calipers TIR 0.0005”

  • Columbus, Ohio, United States
  • Jan 30th
ERON 6" MILL MILLING MACHINE VISE W/ SPEED HANDLE FOR BRIDGEPORT - WEBB - LAGUN

ERON 6" MILL MILLING MACHINE VISE W/ SPEED HANDLE FOR BRIDGEPORT - WEBB - LAGUN

  • Chino, California, United States
  • Jan 30th
3" Drill Press Vise

3" Drill Press Vise

  • Chino, California, United States
  • Jan 30th
KURT SWIVEL BASE D60 For 6" ANGLOCK VISE FITS Model D60, D675, D688 Made in USA

KURT SWIVEL BASE D60 For 6" ANGLOCK VISE FITS Model D60, D675, D688 Made in USA

  • Edison, New Jersey, United States
  • Jan 30th
machine/vise handle only metric 8mm diameter

machine/vise handle only metric 8mm diameter

  • Warren, Pennsylvania, United States
  • Jan 30th

People who viewed this item also vieved

DA200 COLLET EXTENSION 1-1/2" DIA SHANK & (2) DA 200 COLLETS CHUCK LOT C13009

DA200 COLLET EXTENSION 1-1/2" DIA SHANK & (2) DA 200 COLLETS CHUCK LOT C13009

  • Dayton, Ohio, United States
  • Jun 27th
DA200 COLLET EXTENSION 1-1/2" DIA SHANK & (2) DA 200 COLLETS CHUCK LOT C13010

DA200 COLLET EXTENSION 1-1/2" DIA SHANK & (2) DA 200 COLLETS CHUCK LOT C13010

  • Dayton, Ohio, United States
  • Jun 27th
3c collets

3c collets

  • Saint Louis, Missouri, United States
  • Jun 28th
Lathe Chuck Adapters, Chuck Size: 12'

Lathe Chuck Adapters, Chuck Size: 12'

  • Duncan, South Carolina, United States
  • May 24th
CLAMP-TITE 8A012 Collars & Couplings - Outside Diameter: 1-1/2'

CLAMP-TITE 8A012 Collars & Couplings - Outside Diameter: 1-1/2'

  • Duncan, South Carolina, United States
  • May 24th
STAFFORD 7L109 Collars & Couplings - Outside Diameter: 2-3/8'

STAFFORD 7L109 Collars & Couplings - Outside Diameter: 2-3/8'

  • Duncan, South Carolina, United States
  • May 24th
WORKHOLDING CLAMP/HOLDER,HOLD DOWN MACHINIST TOOL: MILLING,LATHES,DRILL PRESSES

WORKHOLDING CLAMP/HOLDER,HOLD DOWN MACHINIST TOOL: MILLING,LATHES,DRILL PRESSES

  • Albuquerque, New Mexico, United States
  • May 25th
WORKHOLDING CLAMP/HOLDER,HOLD DOWN MACHINIST TOOL: MILLING,DRILL PRESSES,LATHES

WORKHOLDING CLAMP/HOLDER,HOLD DOWN MACHINIST TOOL: MILLING,DRILL PRESSES,LATHES

  • Albuquerque, New Mexico, United States
  • May 25th
DE-STA-CO. TOGGLE CLAMPS 2 MODEL 225-U & 2 MODEL 205 LOT OF 4 CLAMPS

DE-STA-CO. TOGGLE CLAMPS 2 MODEL 225-U & 2 MODEL 205 LOT OF 4 CLAMPS

  • Vancouver, Washington, United States
  • May 25th
John Lang & Sons 6-1/2" OD 3-Jaw Power Lathe Chuck Speed Close

John Lang & Sons 6-1/2" OD 3-Jaw Power Lathe Chuck Speed Close

  • Lorain, Ohio, United States
  • May 26th
NEW ROHM KZF POWER OPERATED COLLET CHUCK CNC LATHE B-42 HARDINGE

NEW ROHM KZF POWER OPERATED COLLET CHUCK CNC LATHE B-42 HARDINGE

  • Coloma, Wisconsin, United States
  • May 26th
New C12-ER11A-100L Collet Chuck Holder Straight CNC Milling Extension Rod

New C12-ER11A-100L Collet Chuck Holder Straight CNC Milling Extension Rod

  • Miami, FL, United States
  • May 26th
South bend lathe original live center #2 morse taper MLC-100NR

South bend lathe original live center #2 morse taper MLC-100NR

  • Wappingers Falls, New York, United States
  • May 27th
ROYAL NO 10684 QUAD BEARING LIVE CENTER 4MT

ROYAL NO 10684 QUAD BEARING LIVE CENTER 4MT

  • Pomona, California, United States
  • May 27th
Live Center - 4 MT

Live Center - 4 MT

  • Moody, Alabama, United States
  • May 27th
Small V Block and Clamp (Inv.34384)

Small V Block and Clamp (Inv.34384)

  • Portland, Connecticut, United States
  • Jun 3rd
NEW 1/16 X 90 DEGREE SOFT LATHE CHUCK JAWS BOLT SIZE 3/8 BOLT CENTER .878 3 HOLE

NEW 1/16 X 90 DEGREE SOFT LATHE CHUCK JAWS BOLT SIZE 3/8 BOLT CENTER .878 3 HOLE

  • Osceola, Indiana, United States
  • Jun 3rd
Iscar c6-slsnr-00110-15 tool holder taper shank 110mm L 63mm OD coolant through

Iscar c6-slsnr-00110-15 tool holder taper shank 110mm L 63mm OD coolant through

  • Middlebury, Indiana, United States
  • Jun 3rd
Fibro 6.206.063 Rotary Gear Rack Housing

Fibro 6.206.063 Rotary Gear Rack Housing

  • Peoria, Illinois, United States
  • Jun 7th
Dial-X Rotary Indexer w/ Penta-Drive DC Motor Indexing Control Index Table

Dial-X Rotary Indexer w/ Penta-Drive DC Motor Indexing Control Index Table

  • Portland, Oregon, United States
  • Jun 7th
ROTARY INDEXER

ROTARY INDEXER

  • Berea, Ohio, United States
  • Jun 7th
TAFT PEIRCE BLOCKS # 860 A

TAFT PEIRCE BLOCKS # 860 A

  • Baldwinville, Massachusetts, United States
  • Jun 8th
Precision Steel Parallel Set 1.25" x 6.0" x .195"

Precision Steel Parallel Set 1.25" x 6.0" x .195"

  • Johnson City, New York, United States
  • Jun 8th
Precision Steel Parallel Set 1.00" x 6.0" x .195"

Precision Steel Parallel Set 1.00" x 6.0" x .195"

  • Johnson City, New York, United States
  • Jun 8th
Getaway Mini Single Point Knitting Needle Case-10"X13.5" Multicolor

Getaway Mini Single Point Knitting Needle Case-10"X13.5" Multicolor

  • Hickory Hills, Illinois, United States
  • Jun 10th
KaiserColour Perfect Bound Coloring Book-On Safari

KaiserColour Perfect Bound Coloring Book-On Safari

  • Hickory Hills, Illinois, United States
  • Jun 10th
EarthArt Coloring Book-River Critters

EarthArt Coloring Book-River Critters

  • Hickory Hills, Illinois, United States
  • Jun 11th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies