~!l@@k!~gas Dayton Unit Heater, # 2ryu7.ng/lp, Propeller, 30, 000 Input Btuh,30w

US $3200

Manteca, California, United States
Nov 19th

Open on mobile:
QR code

This is a NEW Unit unused and comes as in the photos. Purchased for a project but never used, project went sour. We misplaced the little flaps that go on the front, so those won't come with it. This is for the Dayton Heater 2RYU7 Only, Gas only unless you get the converter for propane. Dayton 2RYU7 Unit Heater, NG/LP, 24, 300 BtuH, 30W Model: 2RYU7 SKU:: 532775 Price: US $890.02 Description Gas Unit Heater, Gas Type NG/LP, Fan Type Propeller, 30, 000 BtuH Input, 24, 300 BtuH Output, Air Flow 370 cfm, 3.0 Full Load Amps, Gas Connection 1/2 In., Flue Dia. 4 In.Height 12-3/8 In., Width 30 In., Depth 25-7/8 In., Indoor Air Discharge Height 12-3/8 In., Indoor Air Discharge Width 30 In., Voltage 120, 60 Hz, Air Temp. Rise 60 Degrees F, Installation Height 8 ft., Ignition System Direct SparkPrimary Heat Exchanger Material 20 ga. Aluminized Steel, Drive Type Direct RestrictionsNote: For altitudes above 2000 ft., consult owner's manual prior to installation for proper adjustments. Gas-Fired Low-Profile Unit HeatersMultitapped rails allow multiple O.C. distances. ETL Certified in accordance with both Categories I and III venting requirements. Approved for installation in residential garage, commercial, and industrial applications. 24V thermostat required (not included); see page 4568.120V NG (LP conversion kit included) Direct spark ignition system Field-convertible for separated combustion application with approved vent kit Power venting allows horizontal venting through side walls Tubular heat exchanger and single burner design TECHNICAL SPECS ItemGas Unit Heater Gas TypeNG/LP Combustion TypeField Convertible Fan TypePropeller BtuH Input30,000 BtuH Output24,300 Air Flow370 cfm Full Load Amps3.0 Gas Connection1/2" Flue Dia.4" O.C. MountingAdjustable Height12-3/8" Width30" Depth25-7/8" Indoor Air Discharge Height12-3/8" Indoor Air Discharge Width30" Voltage120 Hz60 Air Temp. Rise60 Degrees F Installation Height8 ft. Ignition SystemDirect Spark Primary Heat Exchanger Material20 ga. Aluminized Steel Drive TypeDirect VentPower Burner Air Inlet Size4" Manufacturers Warranty Length1 yr. Part, 10 yr. Heat Exchanger StandardsETL, Including ETL Requirements For Residential Garages Installation