Labconco Universal 4' Base Stand (for Purifier), 30" High Model 8087000, US $3500 – Picture 0

Labconco Universal 4' Base Stand (for Purifier), 30" High Model 8087000, US $3500 – Picture 1

Labconco Universal 4' Base Stand (for Purifier), 30" High Model 8087000, US $3500 – Picture 2

Labconco Universal 4' Base Stand (for Purifier), 30" High Model 8087000, US $3500 – Picture 3

Labconco Universal 4' Base Stand (for Purifier), 30" High Model 8087000, US $3500 – Picture 4

Labconco Universal 4' Base Stand (for Purifier), 30" High Model 8087000, US $3500 – Picture 5

Labconco Universal 4' Base Stand (for Purifier), 30" High Model 8087000, US $3500 – Picture 6

Labconco Universal 4' Base Stand (for Purifier), 30" High Model 8087000, US $3500 – Picture 7

Labconco Universal 4' Base Stand (for Purifier), 30" High Model 8087000, US $3500 – Picture 8

Labconco Universal 4' Base Stand (for Purifier), 30" High Model 8087000, US $3500 – Picture 9

Labconco Universal 4' Base Stand (for Purifier), 30" High Model 8087000, US $3500 – Picture 10

Labconco Universal 4' Base Stand (for Purifier), 30" High Model 8087000, US $3500 – Picture 11

Labconco Universal 4' Base Stand (for Purifier), 30" High Model 8087000

US $3500

Palm Desert, California, United States
Jan 30th

Open on mobile:
QR code

Unused Base Stand. Labconco 4' Universal Base Stand, 30" High. Model 8087000 P/N 80870003726. It comes with Installation Instruction Sheets and screws. Shipping will be determined after bidding and buyer is responsible for shipping costs. ----------------------------------------------- Installation of Equipment on Universal Stands- Purifier (Model No. 36204, 36205, 36208, 36209, 36210, 36211, 36212, 36213, 36214, 36601, 36602) 1. Remove both side panels which cover the outside lower half of the Purifier. This is accomplished by removing three (3) #10-24 screws from the reas of each panel assembly and sliding the side panel forward until the retaining clips are disengaged. 2. Center Purifer on the stand left to the right and locate front to rear so holes in the side mounting angles, which are attached to the lower edges of the Purifier, line up with the threaded holes in the top surface of both side assemblies on the stand. 3. Attach Purifier to the stand top rails with four (4) 1/4-20x 5/8" screws, four (4) 1/4" washers and four (4) 1/4" lockwashers provided. Securely thighten screws. 4. Replace the side panels on the Purifier. Purifer Clean Bench (Model No. 36000, 36100, 36125) 1. Center Clean Bench on the stand left to right. Front edge of Clean Bench to overhang the front of stand top rails by 5 11/16" making rear of Clean Bench flush with back of stand. 2. Using the clearance holes in mounting angles as template, drill pivot holes (approximately 1/8" diameter x 1/4" deep in bottom of Clean Bench. 3. Secure Clean Bench to stand with six (6) #14 x 3/4" screws provided. Securely tighten screws. Protector Work Station with Work Surface (Model No. 69400-00 thru 03, 69410-00 thru 03 1. Center work surface on stand left to right and front to back of stand top rails. 2. Attach work surface to stand mounting angles with (4) #10 flat washers provided. Securely tighten screws. On Nov-13-14 at 00:35:41 PST, seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back FREE! Sellers: Add a FREE map to your listings. FREE! On Nov-23-14 at 22:06:55 PST, seller added the following information:

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Country/Region of Manufacture	United States
Model	4' Base Unit, 30" High Model 8087000
Brand	Labconco
MPN	80870003726