+ Post new Ad
Lamello Cantex Ergo Flush Milling Machine, US $1,800.00 – Picture 0
Lamello Cantex Ergo Flush Milling Machine, US $1,800.00 – Picture 0

Lamello Cantex Ergo Flush Milling Machine

US $1,800.00

  • Bonita Springs, Florida, United States
  • Jan 30th
Open on mobile:
QR code
The Lamello Cantex Ergo                                   The flush milling machine of the highest quality for flush milling solid wood edges as well as minispot patches. The geometry of the cutting head with three reversible blades offers high quality finish even when cutting against the grain. Precision height adjustment in increments of .0014 per click with repeatable settings can achieve results that are perfectly flush, slightly below, or slightly above the surface. The NEW cutter head design has a scale engraved in inches and millimeters for easy setting of the parallel guide stop fence from the outside edge to the desired inside cut end. Equipped with the successful Step Memory System for high-precision requirements Helical cutter design guarantees tear-free work Cutter head with 3 carbide disposable reversing blades Support to protect the milling machine when it is running down or not in use Ergonomic arrangement of switches and grips Chip protector on the front edge of the supporting plate Optimized chip ejection Suction equipment available as accessories Adjustable handgrip for safe and accurate guidance of the machine Milling width 45 mm. Special coating of the support plate provides an optimized sliding surface Prevents signs of abrasion on the workpiece Dismantable gib on one side ensures problem-free entry into solid wood edges New Parallel Guide Stop - Sold Separately With a quick set stop and a micro adjustment Special coating of the supporting plate Provides an optimized sliding surface and prevents damaging of the reference material surface Technical Data Motor 705 W Speed 10,000 RPM Cutter head 3 reversing blades Cutting width 45 mm. Weight 3.4 kg. Voltages 230 V, 120 V                       
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Country/Region of Manufacture United States

Directions

Similar products from Blades, Saw Blades & Cutters

CRAFTSMAN 80 INCH BANDSAW BLADE. COMBO

CRAFTSMAN 80 INCH BANDSAW BLADE. COMBO

  • Jonesboro, Louisiana, United States
  • Jan 30th
* 100 ft - 3/8" width - BAND SAW BLADE #2- USA made - DIAMOND SAW WORKS * UNUSED

* 100 ft - 3/8" width - BAND SAW BLADE #2- USA made - DIAMOND SAW WORKS * UNUSED

  • Shamokin Dam, Pennsylvania, United States
  • Jan 30th
* 100 ft - 1/2" width - BAND SAW BLADE - USA made - DIAMOND SAW WORKS * UNUSED

* 100 ft - 1/2" width - BAND SAW BLADE - USA made - DIAMOND SAW WORKS * UNUSED

  • Shamokin Dam, Pennsylvania, United States
  • Jan 30th
CBN Wheel 5" for Bandsaw Resharpening

CBN Wheel 5" for Bandsaw Resharpening

  • Rockport, West Virginia, United States
  • Jan 30th
Freeborn PT-19-010 6 Pc. V-Paneling T-Alloy Shaper Cutter Set 1-1/4-Inch Bore

Freeborn PT-19-010 6 Pc. V-Paneling T-Alloy Shaper Cutter Set 1-1/4-Inch Bore

  • Bonita Springs, Florida, United States
  • Jan 30th
Freeborn PT-19-020 Flooring T-Alloy Shaper Cutter Set 1-1/4-Inch Bore

Freeborn PT-19-020 Flooring T-Alloy Shaper Cutter Set 1-1/4-Inch Bore

  • Bonita Springs, Florida, United States
  • Jan 30th
Amana Tool MD10-500 Combination 10-Inch Diameter by 50-Teeth by 5/8-Inch Bore,

Amana Tool MD10-500 Combination 10-Inch Diameter by 50-Teeth by 5/8-Inch Bore,

  • Byron, Georgia, United States
  • Jan 30th
Skarpaz 15" 100 Tooth Aluminum /Non ferrous metal Cutting Saw Blade

Skarpaz 15" 100 Tooth Aluminum /Non ferrous metal Cutting Saw Blade

  • Tracy, California, United States
  • Jan 30th
Lamello Zeta P2 with Diamond Cutter, Drill Jig & Bit - No. 101402

Lamello Zeta P2 with Diamond Cutter, Drill Jig & Bit - No. 101402

  • Bonita Springs, Florida, United States
  • Jan 30th
Lamello Classic X - The low-priced machine for every workshop

Lamello Classic X - The low-priced machine for every workshop

  • Bonita Springs, Florida, United States
  • Jan 30th
Lamello Profila Edge Finisher

Lamello Profila Edge Finisher

  • Bonita Springs, Florida, United States
  • Jan 30th
Lamello Profila Pneumatic

Lamello Profila Pneumatic

  • Bonita Springs, Florida, United States
  • Jan 30th
Lamello Minispot G2A Wood Repair Machine

Lamello Minispot G2A Wood Repair Machine

  • Bonita Springs, Florida, United States
  • Jan 30th
7" Continuous Rim Porcelain/Granite J Slot Music Diamond Blades

7" Continuous Rim Porcelain/Granite J Slot Music Diamond Blades

  • Beaumont, California, United States
  • Jan 30th
Lamello Top 21 with NEW powerful 800-Watt Electronic Smart Motor

Lamello Top 21 with NEW powerful 800-Watt Electronic Smart Motor

  • Bonita Springs, Florida, United States
  • Jan 30th
Lamello Zeta P2 with Carbide Cutter, Drill Jig & Bit - No. 101402

Lamello Zeta P2 with Carbide Cutter, Drill Jig & Bit - No. 101402

  • Bonita Springs, Florida, United States
  • Jan 30th
Lot 2877 Casing WOODMASTER Weinig/WKW Corrugated Knives Shaper Moulder

Lot 2877 Casing WOODMASTER Weinig/WKW Corrugated Knives Shaper Moulder

  • College Station, Texas, United States
  • Jan 30th
13 - 55MM x 57MM Brad Point Carbide Bits

13 - 55MM x 57MM Brad Point Carbide Bits

  • Bonita Springs, Florida, United States
  • Jan 30th
MOLDER MOULDER PLANER CUTTERHEADS KNIVES GANG SAW ARBOR

MOLDER MOULDER PLANER CUTTERHEADS KNIVES GANG SAW ARBOR

  • Cornell, Michigan, United States
  • Jan 30th
Weiler 4 1/2" Bevel Knot Brush 020 HT Wire, 5/8"-11 Item #13476

Weiler 4 1/2" Bevel Knot Brush 020 HT Wire, 5/8"-11 Item #13476

  • Salinas, California, United States
  • Jan 30th

People who viewed this item also vieved

1939 EDITION (No.35) OF POPULAR MECHANICS SHOP NOTES VERY GOOD CONDITION

1939 EDITION (No.35) OF POPULAR MECHANICS SHOP NOTES VERY GOOD CONDITION

  • Shelby, North Carolina, United States
  • Feb 22nd
1938 EDITION (No.34) OF POPULAR MECHANICS SHOP NOTES EXCELLENT CONDITION

1938 EDITION (No.34) OF POPULAR MECHANICS SHOP NOTES EXCELLENT CONDITION

  • Shelby, North Carolina, United States
  • Feb 22nd
1937 EDITION (No.33) OF POPULAR MECHANICS SHOP NOTES VERY GOOD CONDITION

1937 EDITION (No.33) OF POPULAR MECHANICS SHOP NOTES VERY GOOD CONDITION

  • Shelby, North Carolina, United States
  • Feb 22nd
Festool Router Bit 491669 HW 24x10x8 Bit, Power Tools Cutter Trim Shaper (F4)

Festool Router Bit 491669 HW 24x10x8 Bit, Power Tools Cutter Trim Shaper (F4)

  • Parksley, Virginia, United States
  • Mar 8th
Festool Router Bit 491670 HW 19x12x8 Bit, Power Tools Cutter Trim Shaper (F3)

Festool Router Bit 491670 HW 19x12x8 Bit, Power Tools Cutter Trim Shaper (F3)

  • Parksley, Virginia, United States
  • Mar 8th
Festool Router Bit 491009 HW 17.1x9x8 R2 Bit, Power Tools Accessory (F2)

Festool Router Bit 491009 HW 17.1x9x8 R2 Bit, Power Tools Accessory (F2)

  • Parksley, Virginia, United States
  • Mar 8th
Wood Veneer Walnut LOT 60pcs total Raw Veneer "EXOTIC" WAL2 6-3-15

Wood Veneer Walnut LOT 60pcs total Raw Veneer "EXOTIC" WAL2 6-3-15

  • Jeffersonville, Indiana, United States
  • Jun 6th
SOLID WOOD ALDER BOARDS - 4 AT 4 15/16" X 23 3/8" X 1 1/16"

SOLID WOOD ALDER BOARDS - 4 AT 4 15/16" X 23 3/8" X 1 1/16"

  • Cleveland, Ohio, United States
  • Jun 7th
Wood Veneer Walnut LOT 60pcs total Raw Veneer "EXOTIC" WAL1 6-3-15

Wood Veneer Walnut LOT 60pcs total Raw Veneer "EXOTIC" WAL1 6-3-15

  • Jeffersonville, Indiana, United States
  • Jun 7th
3ft Woodworking Clamps

3ft Woodworking Clamps

  • Spring City, Pennsylvania, United States
  • Jun 21st
SET OF 2 ANTIQUE CALIPERS

SET OF 2 ANTIQUE CALIPERS

  • Mount Vernon, New York, United States
  • Jun 22nd
Bessey K3.524 K Body 24" 4 Pack Used

Bessey K3.524 K Body 24" 4 Pack Used

  • Fairbury, Illinois, United States
  • Jun 23rd
Big Horn 25069 3/4" PM Skew Chisel

Big Horn 25069 3/4" PM Skew Chisel

  • Escondido, California, United States
  • May 30th
Big Horn 25280 5 Piece Pro-PM Power Metallurgy Turning Set

Big Horn 25280 5 Piece Pro-PM Power Metallurgy Turning Set

  • Escondido, California, United States
  • May 30th
Big Horn 25155 1/2" PM Ellsworth Signature Gouge

Big Horn 25155 1/2" PM Ellsworth Signature Gouge

  • Escondido, California, United States
  • May 30th
1950s &60s Cabinet Making and Millwork, Great Book

1950s &60s Cabinet Making and Millwork, Great Book

  • Paso Robles, California, United States
  • Jun 1st
Genuine Freeborn Tantung Carbide Shaper Cutter 3/4" Bore With 1/2"bushings

Genuine Freeborn Tantung Carbide Shaper Cutter 3/4" Bore With 1/2"bushings

  • New City, New York, United States
  • Jun 1st
1/2" Bore x 1- 9/32" Dia Carbide-Tipped Side Milling Cutter

1/2" Bore x 1- 9/32" Dia Carbide-Tipped Side Milling Cutter

  • Alpharetta, Georgia, United States
  • Jun 1st
WoodOwl 00701 Overdrive Wood Boring Bit for Cordless Drills, 5/8-Inch Diameter

WoodOwl 00701 Overdrive Wood Boring Bit for Cordless Drills, 5/8-Inch Diameter

  • USA, United States
  • Jun 7th
Vintage Hanson Drill Index Set 9 Pc 1/16-11/64

Vintage Hanson Drill Index Set 9 Pc 1/16-11/64

  • Eagle, Idaho, United States
  • Jun 7th
New Craftsman 3/8 Black Oxide Drill Bit 5"

New Craftsman 3/8 Black Oxide Drill Bit 5"

  • Rosemead, California, United States
  • Jun 7th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies