+ Post new Ad
Large Fence Antique Table Saw Vintage Richards Die Saw Gage Miter Gauge Cast, US $1200 – Picture 0
Large Fence Antique Table Saw Vintage Richards Die Saw Gage Miter Gauge Cast, US $1200 – Picture 0

Large Fence Antique Table Saw Vintage Richards Die Saw Gage Miter Gauge Cast

US $1200

  • Landenberg, Pennsylvania, United States
  • Jun 6th
Open on mobile:
QR code
We have here a vintage cast iron fence. See my other auctions for (3) additional cast iron miters and fences. This could be used for an antique table saw. Believe this came off a Richards Die saw, and would probably fit other large antique table saws or shapers of the era.   Hard to find old cast iron fences in good condition anymore. The tabs on the underside of the fence are 9" C/L, but the one side looks to be adjustable. See pictures. This fence weighs 23 lbs. (See pictures) Probably 50 to 60 years old. Plenty of pictures....       Plenty of high resolution pictures are featured. (If additional detail is required......the pictures may be copied and downloaded to your desktop. There they can be "zoomed-in on" if detail is required)   Allow $40.00 shipping to anywhere in the lower 48 States.   Be sure to take a look at my other auctions.... Click Here for More Good Stuff!   Ships to USA only.

Directions

Similar products from Professional Sawing Equipment

INDUSTRIAL 12 FOOT BY 24 INCH DUAL SIDED BLADE FOAM CUTTING SAW EXPENSIVE!

INDUSTRIAL 12 FOOT BY 24 INCH DUAL SIDED BLADE FOAM CUTTING SAW EXPENSIVE!

  • Huntington Beach, California, United States
  • Jun 6th
Delta Unisaw Magnetic Contactor Motor Starter 583-00-001-0066 NEW!

Delta Unisaw Magnetic Contactor Motor Starter 583-00-001-0066 NEW!

  • Westlake, Ohio, United States
  • Jun 6th
pair sawblades Diehl 14 in 35 tooth Rip Saw blades flat top mount straight line

pair sawblades Diehl 14 in 35 tooth Rip Saw blades flat top mount straight line

  • DeKalb, Illinois, United States
  • Jun 6th
Allen Bradley 512 combination starter nema size 1 disconnect 512bjb624r 509 bod

Allen Bradley 512 combination starter nema size 1 disconnect 512bjb624r 509 bod

  • DeKalb, Illinois, United States
  • Jun 6th
EAGLE TOOL XL12 FREUD 4" BISCUIT JOINER STANDNEW IN BOX W/MANUAL

EAGLE TOOL XL12 FREUD 4" BISCUIT JOINER STANDNEW IN BOX W/MANUAL

  • Melbourne, Florida, United States
  • Jun 6th
26" Blade Guard for Walk Behind Concrete Saw Target Edco Core Cut Diamond

26" Blade Guard for Walk Behind Concrete Saw Target Edco Core Cut Diamond

  • Harrisville, Rhode Island, United States
  • Jun 6th
Hindrick 6 foot Panel Saw-expandable-height adjustable linear motion device

Hindrick 6 foot Panel Saw-expandable-height adjustable linear motion device

  • Jackson, Mississippi, United States
  • Jun 6th
Simonds Metal Band Saw 37-496000 New #61618

Simonds Metal Band Saw 37-496000 New #61618

  • Holly, Michigan, United States
  • Jun 6th
DeWalt Model DW713 Miter Saw **NEW**

DeWalt Model DW713 Miter Saw **NEW**

  • Pomona, California, United States
  • Jun 6th
VINTAGE CRAFTSMAN 103 series TABLE SAW CAST IRON EXTENSION WING

VINTAGE CRAFTSMAN 103 series TABLE SAW CAST IRON EXTENSION WING

  • Prior Lake, Minnesota, United States
  • Jun 6th
DeWalt Model GPN2 Radial Arm Saw 3HP 200-220/440V 3Ph w/Control 48"W Table

DeWalt Model GPN2 Radial Arm Saw 3HP 200-220/440V 3Ph w/Control 48"W Table

  • Middlebury, Indiana, United States
  • Jun 5th
Rockwell/Delta 40C-RAS 5HP Radial Arm Saw 230/460V Sold For Parts Saw Does Run

Rockwell/Delta 40C-RAS 5HP Radial Arm Saw 230/460V Sold For Parts Saw Does Run

  • Middlebury, Indiana, United States
  • Jun 5th
DEWALT RADIAL ARM SAW PICK-UP ONLY ZIP 18976

DEWALT RADIAL ARM SAW PICK-UP ONLY ZIP 18976

  • Warrington, Pennsylvania, United States
  • Jun 5th
Walker Turner 14" Bandsaw Lower Door

Walker Turner 14" Bandsaw Lower Door

  • Oxford, Pennsylvania, United States
  • Jun 5th
Walker Turner 14" Bandsaw Upper Cover "A"

Walker Turner 14" Bandsaw Upper Cover "A"

  • Oxford, Pennsylvania, United States
  • Jun 5th
Walker Turner 14" Bandsaw Lower Cover "B" Note: Crack in cover

Walker Turner 14" Bandsaw Lower Cover "B" Note: Crack in cover

  • Oxford, Pennsylvania, United States
  • Jun 5th
Walker Turner 14" Bandsaw Upper Door "C"

Walker Turner 14" Bandsaw Upper Door "C"

  • Oxford, Pennsylvania, United States
  • Jun 5th
Walker Turner 14" Bandsaw Lower Door "D"

Walker Turner 14" Bandsaw Lower Door "D"

  • Oxford, Pennsylvania, United States
  • Jun 5th
Klein Tools 709 4-Inch Magic-Slot Electrician's Cut-In Blade

Klein Tools 709 4-Inch Magic-Slot Electrician's Cut-In Blade

  • Torrance, California, United States
  • Jun 5th
Rockwell table saw 12 to 14 Inch tilt

Rockwell table saw 12 to 14 Inch tilt

  • El Paso, Texas, United States
  • Jun 5th

People who viewed this item also vieved

Vintage Dunlap Electric Motor & Sears Roebuck Compressor Working

Vintage Dunlap Electric Motor & Sears Roebuck Compressor Working

  • Harrison, New Jersey, United States
  • Jan 30th
Delta Floor Standing Drill Press Sale!!!

Delta Floor Standing Drill Press Sale!!!

  • Hoffman Estates, Illinois, United States
  • Jan 30th
Walker Turner Drill Press Sale!!

Walker Turner Drill Press Sale!!

  • Hoffman Estates, Illinois, United States
  • Jan 30th
DOUBLE 100A25 SPROCKET /TAPER 2 5/8 / 2 11/16 CENTER /100 CHAIN / 25 TEETH

DOUBLE 100A25 SPROCKET /TAPER 2 5/8 / 2 11/16 CENTER /100 CHAIN / 25 TEETH

  • Sutherlin, Oregon, United States
  • Jan 30th
2011 DUBOIS Panel Auto Feeder

2011 DUBOIS Panel Auto Feeder

  • Brantford, Ontario, Canada
  • Jan 30th
2011 Dubois CCD-52 Curtain Coater - Spray Machine

2011 Dubois CCD-52 Curtain Coater - Spray Machine

  • Brantford, Ontario, Canada
  • Jan 30th
CNC Router Gantry Sides 1/2" thick AL

CNC Router Gantry Sides 1/2" thick AL

  • Newark, Delaware, United States
  • Jan 30th
Stair Router Multi Function Trencher Ruwo dual trencher stringer template Ruvo

Stair Router Multi Function Trencher Ruwo dual trencher stringer template Ruvo

  • DeKalb, Illinois, United States
  • Jan 30th
ROUTER CNC3020 4-Axis CNC 3020 ENGRAVER DRILLING MILLING MACHINE w/ Claw Chuck

ROUTER CNC3020 4-Axis CNC 3020 ENGRAVER DRILLING MILLING MACHINE w/ Claw Chuck

  • default, default, Hong Kong
  • Jan 30th
Oliver 6310 6" x 108" Oscillating Edge Sander

Oliver 6310 6" x 108" Oscillating Edge Sander

  • Kent, Washington, United States
  • Jan 30th
Oakley Model H-648 Type B-6 Edge Sander

Oakley Model H-648 Type B-6 Edge Sander

  • United States
  • Jan 30th
TTC Hand Tapper - Model : 265-110 Tap Capacity: #0-5/8" Throat Depth: 7-1/2"

TTC Hand Tapper - Model : 265-110 Tap Capacity: #0-5/8" Throat Depth: 7-1/2"

  • Flushing, New York, United States
  • Jan 30th
8" Lathe Tool Rest with 1-1/8 x 3/4" Post MARKED (W 105-1) WADE I BELIEVE

8" Lathe Tool Rest with 1-1/8 x 3/4" Post MARKED (W 105-1) WADE I BELIEVE

  • Manchester Township, New Jersey, United States
  • Feb 14th
Vectrax 13" Gap Lathe w/ Dro many accessories, used only 6Hrs in Connecticut

Vectrax 13" Gap Lathe w/ Dro many accessories, used only 6Hrs in Connecticut

  • Bethlehem, Connecticut, United States
  • Feb 14th
RECONDITION LATE NODEL BRIDGEPORT MILLING MACHINE SERIES 1 (2 HP)

RECONDITION LATE NODEL BRIDGEPORT MILLING MACHINE SERIES 1 (2 HP)

  • New Britain, Connecticut, United States
  • Feb 14th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies