+ Post new Ad
LARGE LOT OF ACORN DIES AND DIE HOLDERS GREENFIELD AND BUTTERFIELD., US $1400 – Picture 0
LARGE LOT OF ACORN DIES AND DIE HOLDERS GREENFIELD AND BUTTERFIELD., US $1400 – Picture 0

Large Lot Of Acorn Dies And Die Holders Greenfield And Butterfield.

US $1400

  • Wichita, Kansas, United States
  • Jun 13th
Open on mobile:
QR code
OFFERED IS A LARGE LOT OF ACORN DIES AND DIE HOLDERS. THERE ARE ABOUT 100 DIES AND 6 HOLDERS. DIES ARE #1, #2 #3 #4. ALOT OF THEM ARE IN VERY GOOD CONDITION WHERE SOME ARE SHOWING SIGNS OF RUST. SIZES AND THREADS VARY FROM OVER AN INCH TO SMALL MM AND 1-72. ANY QUESTIONS PLEASE ASK AND I WILL DO MY BEST TO ANSWER I AM SELLING THESE FOR WORK. THANK YOU, HAL.

Directions

Similar products from Tools for Drilling & Tapping Equipment

SPV Tension Compression Torque Control Tapping Chuck, SPV SA-2B, Sweden, Devlieg

SPV Tension Compression Torque Control Tapping Chuck, SPV SA-2B, Sweden, Devlieg

  • Saint Clair, Michigan, United States
  • Jun 13th
RECOIL UNS 1" - 14 THREAD RESTORE KIT HELICOIL TYPE KIT

RECOIL UNS 1" - 14 THREAD RESTORE KIT HELICOIL TYPE KIT

  • Tallmadge, Ohio, United States
  • Jun 13th
helicoil thread repair kit

helicoil thread repair kit

  • Hialeah, Florida, United States
  • Jun 13th
RECOIL THREAD REPAIR HELICAL KIT UNC 6-32 33560

RECOIL THREAD REPAIR HELICAL KIT UNC 6-32 33560

  • Birmingham, Alabama, United States
  • Jun 13th
National Spline Taper Adatper- #20 and a #00

National Spline Taper Adatper- #20 and a #00

  • Sherrill, New York, United States
  • Jun 13th
DORMER 1-7/8 - 8 N5 HS GH-6 624E 2501 PLG

DORMER 1-7/8 - 8 N5 HS GH-6 624E 2501 PLG

  • Baudette, Minnesota, United States
  • Jun 13th
RECOIL M16 - 1.50 THREAD REPAIR SET KIT HELICOIL

RECOIL M16 - 1.50 THREAD REPAIR SET KIT HELICOIL

  • Erie, Pennsylvania, United States
  • Jun 13th
G&J Hall Tools KNC875 Powerbor Combi Drill/Tap Kit includes Cutter, 7/8" - 9" UN

G&J Hall Tools KNC875 Powerbor Combi Drill/Tap Kit includes Cutter, 7/8" - 9" UN

  • Franklin, Tennessee, United States
  • Jun 13th
(6) Helicoil insertation tools 6-32-5/16 24

(6) Helicoil insertation tools 6-32-5/16 24

  • Peabody, Massachusetts, United States
  • Jun 13th
Thread repair insert part# rco3164

Thread repair insert part# rco3164

  • Lexington, South Carolina, United States
  • Jun 13th
USED COLLIS 1-1/2" HAND TAP No. 4MT SOLID TAPER HEAVY-DUTY TAP DRIVER 70407

USED COLLIS 1-1/2" HAND TAP No. 4MT SOLID TAPER HEAVY-DUTY TAP DRIVER 70407

  • Holland, Ohio, United States
  • Jun 13th
Midland Supply Tool Kit, Screw Thread Insert 8 x 32 5180-00-935-0730

Midland Supply Tool Kit, Screw Thread Insert 8 x 32 5180-00-935-0730

  • Philadelphia, Pennsylvania, United States
  • Jun 13th
FTI Nosecap Assembly MJ-A4-1001F Aviation Cold Expansion System

FTI Nosecap Assembly MJ-A4-1001F Aviation Cold Expansion System

  • Kennett Square, Pennsylvania, United States
  • Jun 13th
PowerCoil Free Running Coil Threaded Insert Kit 1/2"-20 x 0.75" 3534-1/2K NNB

PowerCoil Free Running Coil Threaded Insert Kit 1/2"-20 x 0.75" 3534-1/2K NNB

  • Roanoke, Virginia, United States
  • Jun 13th
Servo Model 7010 Precision Mini Drill Press With Albreicht 0-3 Chuck Machinist

Servo Model 7010 Precision Mini Drill Press With Albreicht 0-3 Chuck Machinist

  • Loxahatchee, Florida, United States
  • Jun 13th
SECO .984" INDEXABLE DRILL 1.25" SHANK SD503 0984 295 1250R7 (LOC1645) TS5

SECO .984" INDEXABLE DRILL 1.25" SHANK SD503 0984 295 1250R7 (LOC1645) TS5

  • Rincon, Georgia, United States
  • Jun 13th
Cleveland Drill and Tap Drill #7 17/32 *FREE SHIPPING*

Cleveland Drill and Tap Drill #7 17/32 *FREE SHIPPING*

  • West Branch, Michigan, United States
  • Jun 13th
Lot of 100 + Various Metal Drill Bits Tools Lathe Drilling Machinist Milling HSS

Lot of 100 + Various Metal Drill Bits Tools Lathe Drilling Machinist Milling HSS

  • Hadley, Pennsylvania, United States
  • Jun 13th
BILZ TAP CHUCKS ACME THREADED SHANKS ~NEW~

BILZ TAP CHUCKS ACME THREADED SHANKS ~NEW~

  • Orwell, Ohio, United States
  • Jun 13th
WALTER B 3213.U5F.0300.Z01.090R INDEXABLE DRILL 30MM DIAMETER USA 20307

WALTER B 3213.U5F.0300.Z01.090R INDEXABLE DRILL 30MM DIAMETER USA 20307

  • Perrysville, Ohio, United States
  • Jun 13th

People who viewed this item also vieved

Geometric 9/16D Threading Head Pull off W/3/4"shank & 10/32 chasers

Geometric 9/16D Threading Head Pull off W/3/4"shank & 10/32 chasers

  • Milwaukee, Wisconsin, United States
  • Jan 30th
Quicher NSR17 Type Automatic Screw Feeder

Quicher NSR17 Type Automatic Screw Feeder

  • Chatsworth, California, United States
  • Jan 30th
Geometric 9/16D 15/32 Projection chasers

Geometric 9/16D 15/32 Projection chasers

  • Milwaukee, Wisconsin, United States
  • Jan 30th
NICE SYSTEM 3R / SUNSPOT CHECK MANDREL 20MM Dia.

NICE SYSTEM 3R / SUNSPOT CHECK MANDREL 20MM Dia.

  • Cedar Grove, Wisconsin, United States
  • Jan 30th
50 PCS 0.20x200MM BRASS ELECTRODE TUBES FOR DRILL EDM (EDM DRILLING), US Seller

50 PCS 0.20x200MM BRASS ELECTRODE TUBES FOR DRILL EDM (EDM DRILLING), US Seller

  • Union City, California, United States
  • Jan 30th
Poco Graphite PyroGraph Pyrolytically Infiltrated Sheet DE-35081 End Plate

Poco Graphite PyroGraph Pyrolytically Infiltrated Sheet DE-35081 End Plate

  • Laporte, Colorado, United States
  • Jan 30th
CHICAGO W31 BOX & PAN FINGER BRAKE - #W31 - WHITNEY - BENDING

CHICAGO W31 BOX & PAN FINGER BRAKE - #W31 - WHITNEY - BENDING

  • Chino, California, United States
  • Jan 30th
Rivet Squeezer

Rivet Squeezer

  • West Liberty, Ohio, United States
  • Jan 30th
DI ACRO #12 TURRET PUNCH DIACRO / FACTORY STAND/PAINT TOOLING CLEAN! PUNCH PRESS

DI ACRO #12 TURRET PUNCH DIACRO / FACTORY STAND/PAINT TOOLING CLEAN! PUNCH PRESS

  • Fair Haven, New Jersey, United States
  • Jan 30th
SUNNEN STONES - V24A47 (1box)

SUNNEN STONES - V24A47 (1box)

  • Summit-Argo, Illinois, United States
  • Jan 30th
SUNNEN STONES - V24A45 (1box)

SUNNEN STONES - V24A45 (1box)

  • Summit-Argo, Illinois, United States
  • Jan 30th
SUNNEN STONES - T20A47 (1box)

SUNNEN STONES - T20A47 (1box)

  • Summit-Argo, Illinois, United States
  • Jan 30th
J&S wheel Dresser

J&S wheel Dresser

  • Thomaston, Georgia, United States
  • Jan 30th
LANDIS Model 1R 10" X 20 Universal Cylindrical Grinder With ID Spindle

LANDIS Model 1R 10" X 20 Universal Cylindrical Grinder With ID Spindle

  • Fountain Valley, California, United States
  • Jan 30th
HAMMOND 10" MODEL WD-10 DOUBLE END CARBIDE TOOL GRINDER: S/N 8716 2 HP

HAMMOND 10" MODEL WD-10 DOUBLE END CARBIDE TOOL GRINDER: S/N 8716 2 HP

  • Chicago, Illinois, United States
  • Jan 30th
Hardinge AHC 13 Cutting Tool.

Hardinge AHC 13 Cutting Tool.

  • Seekonk, Massachusetts, United States
  • Jan 30th
Hardinge DSM 59 Tool Holder And 2 Knurling Tools.

Hardinge DSM 59 Tool Holder And 2 Knurling Tools.

  • Seekonk, Massachusetts, United States
  • Jan 30th
Hardinge DSM 59 Tooling For Turret Operation

Hardinge DSM 59 Tooling For Turret Operation

  • Seekonk, Massachusetts, United States
  • Jan 30th
CINCINNATI DIVIDING INDEXER HEAD 1-1/2" W/ADJUSTABLE TAILSTOCK *CAN POWER DRIVEN

CINCINNATI DIVIDING INDEXER HEAD 1-1/2" W/ADJUSTABLE TAILSTOCK *CAN POWER DRIVEN

  • Louisville, Kentucky, United States
  • Jan 30th
VARI-SPEED HEAD Birmingham VERTICAL MILL, 3 HP 220 - SINGLE PHASE

VARI-SPEED HEAD Birmingham VERTICAL MILL, 3 HP 220 - SINGLE PHASE

  • Hudson, Florida, United States
  • Jan 30th
WALTER INDEXABLE END MILL 1" SHANK 5.5" OAL B2075 5344640R (LOC1218D) TS12

WALTER INDEXABLE END MILL 1" SHANK 5.5" OAL B2075 5344640R (LOC1218D) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
Rapid Air RS1 Stock Reel (USED) 125Lbs Capacity

Rapid Air RS1 Stock Reel (USED) 125Lbs Capacity

  • Lynnwood, Washington, United States
  • Jan 30th
Ridgid 37615 OO-RB 5/16" Manual Bolts Die Head

Ridgid 37615 OO-RB 5/16" Manual Bolts Die Head

  • Racine, Wisconsin, United States
  • Jan 30th
Doall Dual Column Horizontal Bandsaw

Doall Dual Column Horizontal Bandsaw

  • Watertown, Connecticut, United States
  • Jan 30th
14" Thrt 20" H Roll-In TF1420 Tilt Frame *Made in the USA* BAND SAW, Variable an

14" Thrt 20" H Roll-In TF1420 Tilt Frame *Made in the USA* BAND SAW, Variable an

  • Harrison, New Jersey, United States
  • Jan 30th
New STARRETT 9/16" HOLE SAW 14mm VH0096 EDP55078

New STARRETT 9/16" HOLE SAW 14mm VH0096 EDP55078

  • Winterset, Iowa, United States
  • Jan 30th
10" Blade Dia 3HP Everett 44 ABRASIVE SAW, Mitering Vise,Wet,Hood

10" Blade Dia 3HP Everett 44 ABRASIVE SAW, Mitering Vise,Wet,Hood

  • Harrison, New Jersey, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies