+ Post new Ad
Large lot of blank punch press tools stamping 5lbs, US $855 – Picture 0
Large lot of blank punch press tools stamping 5lbs, US $855 – Picture 0

Large Lot Of Blank Punch Press Tools Stamping 5lbs

US $855

  • Francis Creek, Wisconsin, United States
  • Jun 16th
Open on mobile:
QR code
Large lot of blank punch press tools stamping 5lbs You are bidding on a lot of 5 pounds of quality blank punches from a local tool and die shop. New punches; most with wax on. There is some dirt, grease, they are not shiny new but none are worn. Shaft sizes on this lot are 1.016, .438, .282, .669, .281, .531 and more miscellaneous sizes. Super low starting price of 99 cents!!!!! Please note: photo is a representative photo of the style and type of punches you will receive. We do not take a new photo every time we sell a 5 pound lot of punches. A lot of punches will contain anywhere from eight to eighteen punches depending on the size of the punches. Please do not e-mail us requesting specific sizes; the cost of labor to sort through the tremendous amount of punches we have is not cost effective for the price we are selling these for. New punches of this kind sell for between $10-60 each. Email or call 920-684-9999 with questions PLEASE READ PRIOR TO BIDDING All items, including new items, are sold “as is”. This does not mean you are buying an item that doesn’t work or is deficient in some manner. All of our items are surplus industrial that comes from factories which no longer need or use the items. Sometimes they have shut down production, sometimes they are upgrading and sometimes they are reducing inventory or downsizing. Be assured that we make every effort to give you an accurate written description along with high quality photos as we understand you cannot be here to physically inspect the item yourself. Most of our items have been tested and this is stated in the description. Some items will be untested but have come out of the factory in working condition and thus described as accurately as possible without actually putting power to the unit. We strive to bring our customers quality merchandise at great prices that they need and often cannot find elsewhere. As a buyer, you need to realize that when purchasing used surplus, you may have to deal with certain unknowns and defects that cannot be known without full scale set up and operation of the machine. As equipment dealers with 20+ years, we’ve found this to be a rare occurrence but it is a risk inherent to buying used equipment. 

Directions

Similar products from Punch Tool Sets & Dies

Punch and Die for Strippit turret Punch .125 w/ 1.25" to 1.5" sleeve

Punch and Die for Strippit turret Punch .125 w/ 1.25" to 1.5" sleeve

  • Montebello, California, United States
  • Jun 16th
DANLY MICROME POST 1.500 x 10.000 inch LG REMOVABLE

DANLY MICROME POST 1.500 x 10.000 inch LG REMOVABLE

  • Modesto, California, United States
  • Jun 16th
1pcs vintage soviet (MADE in USSR) die 7/8"X9, NEW

1pcs vintage soviet (MADE in USSR) die 7/8"X9, NEW

  • Saint-Petersburg, Russian Federation
  • Jun 16th
10 pcs vintage soviet (Made in USSR) dies 9/16"X18, NEW

10 pcs vintage soviet (Made in USSR) dies 9/16"X18, NEW

  • Saint-Petersburg, Russian Federation
  • Jun 16th
100 pcs vintage soviet (Made in USSR) dies 9/16"X18, NEW

100 pcs vintage soviet (Made in USSR) dies 9/16"X18, NEW

  • Saint-Petersburg, Russian Federation
  • Jun 16th
10 pcs vintage soviet (made in USSR) dies 3/8"x16, NEW

10 pcs vintage soviet (made in USSR) dies 3/8"x16, NEW

  • Saint-Petersburg, Russian Federation
  • Jun 16th
Mate 135 MAT'L .250 Punch and die 04142017 shaft size 1.5"

Mate 135 MAT'L .250 Punch and die 04142017 shaft size 1.5"

  • Montebello, California, United States
  • Jun 16th
UNIPUNCH UNITOOL C FRAME LOT SALE, 16 PCS, SOME WITH DIE / PUNCH

UNIPUNCH UNITOOL C FRAME LOT SALE, 16 PCS, SOME WITH DIE / PUNCH

  • Cullom, Illinois, United States
  • Jun 16th
Starrett No.18A Automatic Center Punch No Reserve

Starrett No.18A Automatic Center Punch No Reserve

  • San Jose, California, United States
  • Jun 16th
SNAP ON 8" DRIFT PUNCH 5/32" SIZE

SNAP ON 8" DRIFT PUNCH 5/32" SIZE

  • Molena, Georgia, United States
  • Jun 16th
Graver C-Max 90 Degree Carbide Narrow Bevel, Made by GRS in the USA

Graver C-Max 90 Degree Carbide Narrow Bevel, Made by GRS in the USA

  • Glendora, California, United States
  • Jun 16th
Graver C-Max 105 Degree Carbide Narrow Bevel, Made by GRS in the USA

Graver C-Max 105 Degree Carbide Narrow Bevel, Made by GRS in the USA

  • Glendora, California, United States
  • Jun 16th
Graver C-Max 120 Degree Carbide Narrow Bevel, Made by GRS in the USA

Graver C-Max 120 Degree Carbide Narrow Bevel, Made by GRS in the USA

  • Glendora, California, United States
  • Jun 16th
Steel 8 inches Long Drive Pin Punch 1/8 Inches - Best Quality Tools And Parts

Steel 8 inches Long Drive Pin Punch 1/8 Inches - Best Quality Tools And Parts

  • New Delhi, India
  • Jun 16th
NOS Newmans CANADA HSS 3" dia. ROUND ADJUSTABLE ROUND SPLIT DIES 1-5/8 5-1/2tpi

NOS Newmans CANADA HSS 3" dia. ROUND ADJUSTABLE ROUND SPLIT DIES 1-5/8 5-1/2tpi

  • Perth, Ontario, Canada
  • Jun 16th
Hardened Alloy Steel 9 Piece Punch and Die Set w/ Clear Plate for Easy Alignment

Hardened Alloy Steel 9 Piece Punch and Die Set w/ Clear Plate for Easy Alignment

  • Columbia, Maryland, United States
  • Jun 16th
30 PC GREENLEE PUNCH DIE 1/2" 2" KNOCKOUT RATCHET PULLER PIPE CONDUIT TOOL USED

30 PC GREENLEE PUNCH DIE 1/2" 2" KNOCKOUT RATCHET PULLER PIPE CONDUIT TOOL USED

  • Westerville, Ohio, United States
  • Jun 16th
31 PC GREENLEE PUNCH DIE 767 KNOCKOUT PULLER PIPE CONDUIT TOOL HYDRAULIC USED

31 PC GREENLEE PUNCH DIE 767 KNOCKOUT PULLER PIPE CONDUIT TOOL HYDRAULIC USED

  • Westerville, Ohio, United States
  • Jun 16th
Tap and Dies, Mill Ends, Transfer Punch

Tap and Dies, Mill Ends, Transfer Punch

  • Lake Luzerne, New York, United States
  • Jun 16th
Lot 10pcs Right Hand Die 5-44 Dies Threading Tools

Lot 10pcs Right Hand Die 5-44 Dies Threading Tools

  • CN, China
  • Jun 16th

People who viewed this item also vieved

DUMONT BROACH 5/16-C HS 11 3/4 INCHES 22 TEETH VERY GOOD

DUMONT BROACH 5/16-C HS 11 3/4 INCHES 22 TEETH VERY GOOD

  • Naperville, Illinois, United States
  • Jan 30th
DUMONT BROACHES 3/32-B HS GREAT CONDITION 6 3/4" LONG

DUMONT BROACHES 3/32-B HS GREAT CONDITION 6 3/4" LONG

  • Naperville, Illinois, United States
  • Jan 30th
CBL7 Carbide Chipbreaker Kennametal Brand 1pc

CBL7 Carbide Chipbreaker Kennametal Brand 1pc

  • Trenton, Michigan, United States
  • Jan 30th
SNMM 4534 Carbide Insert Grade KC950 Kennametal Brand 8pcs

SNMM 4534 Carbide Insert Grade KC950 Kennametal Brand 8pcs

  • Trenton, Michigan, United States
  • Jan 30th
SANDVIK COROMANT, N123H1-0410-0003, CD10, GROOVING INSERT LATHE

SANDVIK COROMANT, N123H1-0410-0003, CD10, GROOVING INSERT LATHE

  • Pinellas Park, Florida, United States
  • Jan 30th
SANDVIK COROMANT, N123H1-0400-0003, CD10, GROOVING INSERT LATHE

SANDVIK COROMANT, N123H1-0400-0003, CD10, GROOVING INSERT LATHE

  • Pinellas Park, Florida, United States
  • Jan 30th
K-Tool GR-A1M 1202 Inserts (QTY 4) (M166)

K-Tool GR-A1M 1202 Inserts (QTY 4) (M166)

  • Dallas, Texas, United States
  • Jan 30th
2x FastCut Tool 74066 HSS 1"x1"x1-5/8" 2 Flute Center Cutting Square End Mill

2x FastCut Tool 74066 HSS 1"x1"x1-5/8" 2 Flute Center Cutting Square End Mill

  • Milpitas, California, United States
  • Jan 30th
NEW Made in USA HSS 4F Interchangeable Pilot Straight Shank Aircraft Counterbor

NEW Made in USA HSS 4F Interchangeable Pilot Straight Shank Aircraft Counterbor

  • Sparks, Nevada, United States
  • Jan 30th
Lot of 11 NEW Interstate Hex Rethreading Dies Thread Size #2-56, Hex Size 19/32

Lot of 11 NEW Interstate Hex Rethreading Dies Thread Size #2-56, Hex Size 19/32

  • Sparks, Nevada, United States
  • Jan 30th
Chucking Reamer Carbide Tip 1" CARR-883 X14944 CM-1288-5

Chucking Reamer Carbide Tip 1" CARR-883 X14944 CM-1288-5

  • Batavia, Ohio, United States
  • Jan 30th
M R & T CO 1-1/8 REAMER

M R & T CO 1-1/8 REAMER

  • Batavia, Ohio, United States
  • Jan 30th
DELTA Cat.No. 28-564 82" Band Saw Blade -16" Motorized Band Saw & All Other 82"

DELTA Cat.No. 28-564 82" Band Saw Blade -16" Motorized Band Saw & All Other 82"

  • King William, Virginia, United States
  • Jan 30th
HARBOR FREIGHT: CHICAGO ELECTRIC 5" DOUBLE CUT SAW $49.99 w *COUPON* Exp.12/31

HARBOR FREIGHT: CHICAGO ELECTRIC 5" DOUBLE CUT SAW $49.99 w *COUPON* Exp.12/31

  • Hinton, West Virginia, United States
  • Jan 30th
T15 Alloy 1/2" Lathe Tool Cutter Bit Machinist Gunsmith South Bend Emco Maximat

T15 Alloy 1/2" Lathe Tool Cutter Bit Machinist Gunsmith South Bend Emco Maximat

  • Supply, North Carolina, United States
  • Jan 30th
GreenLee 660

GreenLee 660

  • Centerton, Arkansas, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies