Lcr-t4 Transistor Tester Esr Meter Mega 328 Transistor Tester With Blue Case Uj9

US $23.96

  • Shenzhen, China
  • Aug 5th
LCR-T4 Transistor Tester ESR Meter Mega 328 Transistor Tester with Blue Case UJ9 Support the measurement and symbol display of two resistances, up to four digits and unit display. Both ends of the displayed resistance symbol are the connected tester probe numbers (1-3). So the potentiometer can also be measured. If the potentiometer is adjusted to one end of it, the tester can distinguish between the middle and both ends of the pin. The resolution of resistance measurement is 0.1 ohm, and the highest measurement value is 50M ohm. A capacitor can be detected and measured. The highest four digits and unit display. The value can be from 25pf (8MHz clock, 50pF@1MHz clock) to 100mF. The resolution can reach 1 pF (@ 8MHz clock). It can be used to measure the equivalent series resistance (ESR) capacitance of capacitors above 2UF. The resolution is 0.01 ohms and two-digit values are displayed. This function requires at least 16K flash ATMEGA (ATmega168 or ATmega328). It is possible to show signs of the correct direction for two diodes. In addition, the forward pressure drop is displayed. The LED is detected as a diode, and the forward voltage drop is much higher than normal. The double light-emitting diode is detected as a double diode. Zener diodes can be detected if the reverse breakdown voltage is lower than 4.5V. This will appear as two diodes and can only be determined by voltage. The symbol of the probe surrounding the diode is the same, in this case, you can identify the true anode of the diode by the threshold voltage near 700mV! If more than 3 diode parts are tested, the number of established diodes will display aher failure message. This will only happen if the diode is connected to all three probes and at least one is a type diode. In this case, you should only connect two probes and start the measurement again, one after the other. Features 1. Use ATmega8, ATmega168 or ATmega328 microcontrollers. 2. 2x16
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
MPN Does Not Apply
Bundle Description No
Brand Unbrand
Resolution Regular
Marke SODIAL
Form Factor Regular
Hersteller SODIAL
Modified Item No
Product Regular
Measurement Functions Regular
Model New Model
Modification Description No
Frequency Range Regular
Output Impedance Regular
Basic Accuracy Regular
Custom Bundle No
Country/Region of Manufacture China
UPC 4894864063082
ISBN 4894864063082
EAN 4894864063082

Directions

Similar products from Inductance, Capacitance, Resistance and Impendace Meters & Analyzers

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies