Lcr-tc1 Colorful Display Pocketable Multifunctional Tft Backlight Transistor Tes

US $30.71

San Bernardino, California, United States
Aug 25th

Open on mobile:
QR code

Store New Arrivals Add to Favorite View Feedback Contact LCR-TC1 Colorful Display Pocketable Multifunctional TFT Backlight Transistor Tester for Diode Triode Capacitor Resistor Transistor LCR ESR NPN PNP MOSFET Description Part Number 3.5" Batteries Required? No Material ABS Item Weight 2.82 ounces Batteries Included? Yes Package Dimensions 5.51 x 3.54 x 1.18 inches Manufacturer YWNYT For detecting NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery, resistor and capacitor and other components, etc. Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly. ( Use 12864 liquid crystal display with green backlight). After detection, align the infrared remote control with the "IR" light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form. Measurement results represent by TFT graphic display(160x128). Support Chinese and English. One key operation, Auto Power Off(Timeout Settable). Can also press the multi-functional button to close the detector. Product Description Features It can be widely used to detect NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery etc. It can also be used to detect infrared wave forms. It also can detect zener diode and has the function of self-calibration. After detection, align the infrared remote control with the "IR" light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form. One button operation, automatically detect and shutdown, and you can press the multi-functional button to close the detector too. Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly. Not like the usual black and white display, this detector will show results in color. Package included 1x Transistor tester 1 x Cable (random) 1 x Electronic Component Set (random) 3 x Test Hook(random) Specifications Display: 3.5inch TFT Screen Diode Range: < 4.5V Zener Diode:Transistor Detect Area: 0.01-4.5V Zener Diode Detect Area: 0.01-30V Triac Range: IGT < 6mA Capacitance: 25pF-100mF Resistor: 0.01-50M? Inductance: 0.01mH-20H Battery: 0.1-4.5V Power Mode: Rechargeable Lithium Battery (NO included) Notes: Please allow 1-3mm error due to manual measurement. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Operating Instructions Multi-function key has two actions: Short press: Press the key and not less than 10 ms, release key within 1.5 seconds Long press: Press the key more than 1.5 seconds Power on In the power off state, short press the multi-function key, the tester is turned on and automatically measured. In the power off state or the test is completed, put the test element into the transistor test area of test seat, and press the locking handle, short press the multi-function key, the tester automatically measure, graphical display of measurement results when testing is complete. Warning: Always be sure to DISCHARGE capacitors before connecting them to the tester! The tester may be damaged before you have switched it on! Warning: We do not recommend using the tester to measure the battery! The battery voltage must be less than 4.5V, otherwise the tester may be damaged! TC-V2.12k is a TFT graphic display Multifunction Tester. Transistor Tester - Automatic detection of zener diode 0.01-30V - Self test with automatic calibration IR Decoder - Support Hitachi IR coding - IR waveform display - Infrared receiving instruction Other - Measurement results using TFT graphic display(160x128) - One key operation - Auto Power Off(Timeout Settable) IR decoder After the component detection is completed,the infrared remote control at the tester"IR" test hole, press the remote control key,the tester will be display the user code&date code and the corresponding infrared waveform after the successful decoding. If decoding failure,the tester cannot display the user code and date code. The dot at the top right corner to indicate whether it has received the remote control infrared date,red represents infrared date is being received,blue represents decoding success. Built-in Li-ion Battery Voltage Measurement The built-in Li-ion Battery voltage is measured before detection,when the battery voltage is less than 3.0V will force shutdown,then please charging. Charging the Battery The tester has a standard Micro USB interface,please use an external 5V power supply or USB power charging.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Does not apply
Item Weight	2.82 ounces
MPN	Does not apply
Batteries Included?	Yes
Part Number	3.5"
Package Dimensions	5.51 x 3.54 x 1.18 inches
Batteries Required?	No
Manufacturer	YWNYT
Material	ABS
Type	Does not apply
UPC	313115872845
ISBN	Does not apply
EAN	0313115872845