+ Post new Ad
Lever Action, Mechanical Wedge Tensile Grips; Cap: 100 kN T-Grip Assy. W-5021, US $1,765.49 – Picture 0
Lever Action, Mechanical Wedge Tensile Grips; Cap: 100 kN T-Grip Assy. W-5021, US $1,765.49 – Picture 0

Lever Action, Mechanical Wedge Tensile Grips; Cap: 100 Kn T-grip Assy. W-5021

US $1,765.49

  • Bristol, Connecticut, United States
  • Feb 28th
Open on mobile:
QR code
Instron Satec Type Test Systems Set Of Two Mechanical Wedge Lever Action Grips ( Lever Operarated) One Pair of Adapters 1-1/4" Diameter 1/2" Pin Hole 3/4-10 TH One Pair of Jaws SATEC 190703-3 The grips are used and someone ding the front noses I could have belt sand it out and reblack the steel but didn't. The jaws are sharp I couldn't tell how much use these have but they look and operate very well. I will answer any question please ask before you buy. I will insure the shippment.   Engineered to be adaptable to both hydraulic and electromechanical UTM's, most T-Grip Jaw Holders are available with an open front style that assists with simple insertion and removal of test specimens.  An assortment of interchangeable jaws will fit in the T-Grip holders, which allows for the acceptance of a range of sizes in both flat and round specimens. To increase the ease of operation, the locking mechanism of the lower holder keeps the grip jaws open so that one-handed specimen insertion is possible.  The upper and lower grip bodies are structurally the same. Each grip body has a pocket that holds a pair of grip jaws and utilizes a wedge design. This wedge design causes the grips to further tighten as load on the specimen is applied, reducing occurrences of slippage.   100 kN (10,000 kg, 22,500 lbs) capacity T-Grip Bodies. Set of two (2) Spring/lever actuated wedge jaw Open front Flat specimens up to 1" wide x 1/2" thick Round specimens up to 1" diameter Approximate weight per body is 15 lbs. Approximate size 6-1/2" H x 6" W x 3-1/2" D Jaws are listed as separate items Bodies are tapped 3/4"-10 NC Thank you for looking!   Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Country/Region of Manufacture United States
MPN W-5021
Manufacturer Instron Satec Type Test Systems

Directions

Similar products from Other Measuring & Monitoring Tools

Starrett Trammel 50A New!

Starrett Trammel 50A New!

  • Reno, Nevada, United States
  • Mar 1st
Two Sets of 1X2X3 Machinists Parallel Blocks

Two Sets of 1X2X3 Machinists Parallel Blocks

  • Grass Valley, California, United States
  • Mar 1st
DTC- 5" Sine Bar Mod. 81.420 Hardened & Ground, Machinist Toolmakers

DTC- 5" Sine Bar Mod. 81.420 Hardened & Ground, Machinist Toolmakers

  • Claremont, California, United States
  • Mar 1st
TWO The Gorilla Bolt Sizer & Thread Pitch Gauges M98 Metric & A98 SAE

TWO The Gorilla Bolt Sizer & Thread Pitch Gauges M98 Metric & A98 SAE

  • Tampa, Florida, United States
  • Mar 1st
Machinists 2/27 Brown and Sharpe Toolbox Size (10") Surface Gage

Machinists 2/27 Brown and Sharpe Toolbox Size (10") Surface Gage

  • Lutz, Florida, United States
  • Feb 28th
UPDATE'S PROACTION PRECISION ALIGNMENT SYSTEM

UPDATE'S PROACTION PRECISION ALIGNMENT SYSTEM

  • Shortsville, New York, United States
  • Feb 28th
STEPPED OD GAUGE BLOCK ????? I couldn't find another like it! MYSTERY TOOL!

STEPPED OD GAUGE BLOCK ????? I couldn't find another like it! MYSTERY TOOL!

  • Chardon, Ohio, United States
  • Feb 28th
New General Tools 147 Fraction+ Digital Fractional Stainless Steel Caliper (6")

New General Tools 147 Fraction+ Digital Fractional Stainless Steel Caliper (6")

  • Streamwood, Illinois, United States
  • Feb 28th
HOMAK HT06801700 17-Piece Precision Pliers/Screwdriver Set New

HOMAK HT06801700 17-Piece Precision Pliers/Screwdriver Set New

  • United States
  • Feb 28th
MM Adjustable Parallel 4 1/2 x 1 6/16 x 1/4

MM Adjustable Parallel 4 1/2 x 1 6/16 x 1/4

  • San Francisco, California, United States
  • Feb 28th
vintage fractional drill bit stand block stands tool metal

vintage fractional drill bit stand block stands tool metal

  • Sterling, Illinois, United States
  • Feb 28th
SATEC SYSTEMS SPRING TESTER #HST-WHO 28" TALL

SATEC SYSTEMS SPRING TESTER #HST-WHO 28" TALL

  • Hillsborough, New Jersey, United States
  • Feb 28th
WIEDEMANN SPRING TESTER #HST-SA 28" TALL

WIEDEMANN SPRING TESTER #HST-SA 28" TALL

  • Hillsborough, New Jersey, United States
  • Feb 28th
SUNNEN GAGE SETTING FIXTURE MODEL PG-400-S

SUNNEN GAGE SETTING FIXTURE MODEL PG-400-S

  • Wyoming, Rhode Island, United States
  • Feb 28th
Antique Micrometer Gage Pla-Chek Cadillac Gage Co. West Germany Industrial Tool

Antique Micrometer Gage Pla-Chek Cadillac Gage Co. West Germany Industrial Tool

  • Escondido, California, United States
  • Feb 28th
SET of 3 EDGE FINDERS wigglers wobblers edgefinders machinist tools *D

SET of 3 EDGE FINDERS wigglers wobblers edgefinders machinist tools *D

  • Thomaston, Connecticut, United States
  • Feb 28th
3 EDGE FINDERS wigglers wobblers edgefinders machinist tools *C

3 EDGE FINDERS wigglers wobblers edgefinders machinist tools *C

  • Thomaston, Connecticut, United States
  • Feb 28th
Gilford 202 Optical Density Absorbance Standards Filter Kit TESTED

Gilford 202 Optical Density Absorbance Standards Filter Kit TESTED

  • Finksburg, Maryland, United States
  • Feb 28th
STARRETT & CRAFTSMAN SURFACE GAUGES

STARRETT & CRAFTSMAN SURFACE GAUGES

  • Hillsborough, New Jersey, United States
  • Feb 28th
LOT OF 3 BROWN & SHARPE SURFACE GAUGES

LOT OF 3 BROWN & SHARPE SURFACE GAUGES

  • Hillsborough, New Jersey, United States
  • Feb 28th

People who viewed this item also vieved

Starrett 120A-9 Dial Caliper, Stainless Steel, White Face, 0-9" Range, +/-0.001"

Starrett 120A-9 Dial Caliper, Stainless Steel, White Face, 0-9" Range, +/-0.001"

  • Cary, Illinois, United States
  • Jan 30th
Mitutoyo CD-18"C Caliper, 500-505-10

Mitutoyo CD-18"C Caliper, 500-505-10

  • Holland, Michigan, United States
  • Jan 30th
7/16 20 UNF 3A LEFT HAND THREAD RING GAGE SET MACHINE INSPECTION TOOLING .4375

7/16 20 UNF 3A LEFT HAND THREAD RING GAGE SET MACHINE INSPECTION TOOLING .4375

  • Dayton, Ohio, United States
  • Feb 13th
1/2 20 UNF 2A THREAD RING GAGE SET MACHINE INSPECTION TOOLING .500 .4662 & .4619

1/2 20 UNF 2A THREAD RING GAGE SET MACHINE INSPECTION TOOLING .500 .4662 & .4619

  • Dayton, Ohio, United States
  • Feb 13th
Test Indicator Holder

Test Indicator Holder

  • Landrum, South Carolina, United States
  • Feb 15th
LOT of 3 VINTAGE STARRETT RULES #13 #400 #607B - MACHINIST TOOLS

LOT of 3 VINTAGE STARRETT RULES #13 #400 #607B - MACHINIST TOOLS

  • Port Charlotte, Florida, United States
  • Feb 15th
STARRETT MODEL 486 4" TO 5" BLADE MICROMETER .001" GRADS

STARRETT MODEL 486 4" TO 5" BLADE MICROMETER .001" GRADS

  • Ellington, New York, United States
  • Feb 15th
MITUTOYO MODEL 122-127 2" TO 3" BLADE MICROMETER .0001" GRADS

MITUTOYO MODEL 122-127 2" TO 3" BLADE MICROMETER .0001" GRADS

  • Ellington, New York, United States
  • Feb 15th
DRO's diagnosed and repaired. One Year Warranty on all Quadra-Chek DRO repairs.

DRO's diagnosed and repaired. One Year Warranty on all Quadra-Chek DRO repairs.

  • Lancaster, Pennsylvania, United States
  • Mar 7th
Jones & Lamson (J&L) Epic-30 AC-3770 Parabolite Reflecting Concentrator & Mount.

Jones & Lamson (J&L) Epic-30 AC-3770 Parabolite Reflecting Concentrator & Mount.

  • Lancaster, Pennsylvania, United States
  • Mar 7th
STARRETT 1 INCH DIGITAL MICROMETER RATCHET STOP .0001 GRADS LOCKNUT NO.T216XRL-1

STARRETT 1 INCH DIGITAL MICROMETER RATCHET STOP .0001 GRADS LOCKNUT NO.T216XRL-1

  • Barre, Massachusetts, United States
  • Mar 7th
STARRETT 1 INCH DIGITAL MICROMETER .0001 GRADS RATCHET STOP LOCKNUT NO.T216XRL-1

STARRETT 1 INCH DIGITAL MICROMETER .0001 GRADS RATCHET STOP LOCKNUT NO.T216XRL-1

  • Barre, Massachusetts, United States
  • Mar 7th
Vintage Starrette Combination Tri Square 3 Pc Set Protractor ( MACHINIST tool )

Vintage Starrette Combination Tri Square 3 Pc Set Protractor ( MACHINIST tool )

  • Parkersburg, West Virginia, United States
  • May 27th
Vintage Machinist 3-1/2" Hardened Precision Steel Square

Vintage Machinist 3-1/2" Hardened Precision Steel Square

  • Langhorne, Pennsylvania, United States
  • May 27th
MS-BV Magnetic Stand With Fine Adjustment Clamp

MS-BV Magnetic Stand With Fine Adjustment Clamp

  • Gladstone, Oregon, United States
  • May 24th
MITUTOYO 7012 Flexible Magnetic Stand, Made Japan, Clamping Force 600N

MITUTOYO 7012 Flexible Magnetic Stand, Made Japan, Clamping Force 600N

  • Kovrov, Ru, Russian Federation
  • May 24th
Small Cast Iron Surface Plate 15/16" x 3 5/8" X 3 11/16"

Small Cast Iron Surface Plate 15/16" x 3 5/8" X 3 11/16"

  • Batavia, Illinois, United States
  • May 25th
Granite Surface Plate, Pink, A, 24" x 36" x 4"

Granite Surface Plate, Pink, A, 24" x 36" x 4"

  • West Berlin, New Jersey, United States
  • May 25th
Fowler 54-440-750 Stainless Steel Electronic Universal Digital Protractor with

Fowler 54-440-750 Stainless Steel Electronic Universal Digital Protractor with

  • USA, United States
  • May 27th
TAKACHIHO SEIKI #496G BEVEL PROTRACTORS STAINLESS & CASE CALIBRATED Machinist

TAKACHIHO SEIKI #496G BEVEL PROTRACTORS STAINLESS & CASE CALIBRATED Machinist

  • Jamison, Pennsylvania, United States
  • May 27th
81 Pc.Gage Block Set Grade B .050"- 4" gauge read

81 Pc.Gage Block Set Grade B .050"- 4" gauge read

  • Hadley, Pennsylvania, United States
  • May 30th
28 Pieces of Assorted Machinists Gauge Blocks and Gauges Gages

28 Pieces of Assorted Machinists Gauge Blocks and Gauges Gages

  • Brighton, Michigan, United States
  • May 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies