Listeroid Diesel Sump Strainer Upgrade Oil Filter

US $25.00

  • Roy, Utah, United States
  • Aug 2nd
Buy it now Sump Strainer for Listeroid 12/2 Diesel Engines w/3" Stainless steel nipple 100 mesh Threaded end aluminum 5 GPM rated 3" S.S. nipple included The original sump strainer that comes with Indian Listeroid diesel engines is worthless, it could barely keeps aligators out. This strainer is 100 mesh and will prevent any big particles from being pumped through the oiling system. This is especially beneficial for the center crankshaft bearing shell that is feed whatever the oil pump delivers. A 3"x1/2" stainless steel nipple is included. Installation is a little tricky as this filter is to large to fit through the sump hole in the block. To install this filter assemble the filter and nipple together. Then nearly remove (or completely remove if you have two people) the tee that passes through the block. Insert the new filter and nipple into the hole and begin tightening. Then it is a process of tightening one then the other. This process is required because the new filter barely fits in the sump. Once it is installed, it cannot come loose. To remove the filter, the tee must also be removed. I used a plumber's basin wrench to do the final tightening from the inside. 1/2" NPT threads are a tiny bit smaller than the Indian Listeroid threads so the nipple screws into the tee slightly easier than normal. I used thread sealer, not sure that it was necessary. Again, once assembled there is not room in the sump for this filter to fall out. Worst case it could come lose, then the filter would ground into the edge of the sump preventing further loosening. I have a completely independent filtering system so I'm not concerned about clogging this filter. You may want to attach a 1/2" ball valve to the other end of your tee so that you can spray a little cleaner inside the strainer when you change the oil. I have a Jkson 12/2 so I can't vouch for how this sump strainer may or may not fit in different Listeroids. If it doesn't fit, return it for a refund less shipping (30 days max.)  Buyer pays all the shipping cost on return.  If you return it, it must be returned it is the same condition as you received it, not all scratched up. $6.00 USPS Priority shipping Paypal Thank you for looking and buying. Dale PTL
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Listeroid
MPN Does Not Apply
UPC Does not apply

Directions

Similar products from Generator Parts & Accessories

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies