+ Post new Ad
LNS Hydrobar Bar Feed system - Model HYS-6.42, US $1400 – Picture 0
LNS Hydrobar Bar Feed system - Model HYS-6.42, US $1400 – Picture 1
LNS Hydrobar Bar Feed system - Model HYS-6.42, US $1400 – Picture 0
LNS Hydrobar Bar Feed system - Model HYS-6.42, US $1400 – Picture 1

Lns Hydrobar Bar Feed System - Model Hys-6.42

US $1400

  • Covina, California, United States
  • Oct 26th
Open on mobile:
QR code
Small Six Tube Model: Designed for smaller bar stock sizes in a six-tube configuration. Widely used for short lot runs, the Super Hydrobar HS provides maximum flexibility for a variety of your production needs. The Bar feeder is in great condition and Everything is as shown in images. This item is local pick up only and must have forklift to lift on to trailer, as we do not supply one.  If you have any questions. please let me know.

Directions

Similar products from Other Workholding Tools

Electro-Matic Chuck Controller Unit, Model# EML1-1A, Type# 1NR73A, Used

Electro-Matic Chuck Controller Unit, Model# EML1-1A, Type# 1NR73A, Used

  • Grand Rapids, Michigan, United States
  • Oct 27th
STRONG HAND MAG-LEVEL - 4"x16"x1" MSL-316

STRONG HAND MAG-LEVEL - 4"x16"x1" MSL-316

  • Indianapolis, Indiana, United States
  • Oct 27th
Festo Solenoid Coil MSN1G-24VDC 123060 NEW

Festo Solenoid Coil MSN1G-24VDC 123060 NEW

  • Kitchener, Ontario, Canada
  • Oct 27th
Starrett Little Giant Jack Screws set in holder

Starrett Little Giant Jack Screws set in holder

  • Hadley, Pennsylvania, United States
  • Oct 27th
Festo Pneumatic Compact Cylinder ADVU-25-25-P-A 156526

Festo Pneumatic Compact Cylinder ADVU-25-25-P-A 156526

  • Kitchener, Ontario, Canada
  • Oct 27th
4 H&R Aluminum Soft Jaws 488PA Pointed 4-7/8" x 3-3/8" x 1-1/2"

4 H&R Aluminum Soft Jaws 488PA Pointed 4-7/8" x 3-3/8" x 1-1/2"

  • Punta Gorda, Florida, United States
  • Oct 27th
6 lb PIVOTING POSITIONING WORK HOLDING BASE McMASTER-CARR MATRIX ENGINEERING

6 lb PIVOTING POSITIONING WORK HOLDING BASE McMASTER-CARR MATRIX ENGINEERING

  • Stockton, New Jersey, United States
  • Oct 27th
T-Slot Studs Bolts Hold Down Tee Lot

T-Slot Studs Bolts Hold Down Tee Lot

  • Unionville, Connecticut, United States
  • Oct 26th
3 J.H Williams #21,#31R & 51 Lathe Parting, Cutting Tool Holder Threading LOT

3 J.H Williams #21,#31R & 51 Lathe Parting, Cutting Tool Holder Threading LOT

  • Tuttle, Oklahoma, United States
  • Oct 26th
2 Machinist Jacks

2 Machinist Jacks

  • Paris, Ohio, United States
  • Oct 26th
24 Piece MILL HOLD DOWN PARTS lot Studs STEP BLOCKs T NUTS clam 6K3

24 Piece MILL HOLD DOWN PARTS lot Studs STEP BLOCKs T NUTS clam 6K3

  • Fountain Valley, California, United States
  • Oct 26th
2 Brown & Sharpe Standard Wire & Music Wire Gauges

2 Brown & Sharpe Standard Wire & Music Wire Gauges

  • Sicklerville, New Jersey, United States
  • Oct 26th
Machine Tool Bolts

Machine Tool Bolts

  • Ball, Louisiana, United States
  • Oct 26th
No Reserve Hirschmann Wire EDM Tooling , AS IS , 4000 series

No Reserve Hirschmann Wire EDM Tooling , AS IS , 4000 series

  • Oldcastle, Ontario, Canada
  • Oct 26th
Steady Rest Turning Lathe 8" hole leblond makino lion okuma daewoo mori haas

Steady Rest Turning Lathe 8" hole leblond makino lion okuma daewoo mori haas

  • Newhall, California, United States
  • Oct 26th
BISON 8" HORIZONTAL-VERTICAL SUPER SPACER 3 JAW CHUCK REV JAWS MILLING INDEXER

BISON 8" HORIZONTAL-VERTICAL SUPER SPACER 3 JAW CHUCK REV JAWS MILLING INDEXER

  • Highland, New York, United States
  • Oct 25th
Winona Van Norman Rotary Broach Workholding Finger 1/2" With Serrated Teeth

Winona Van Norman Rotary Broach Workholding Finger 1/2" With Serrated Teeth

  • Council Grove, Kansas, United States
  • Oct 25th
Winona Van Norman Rotary Broach Offset Workholding Finger 1/2" w/ Serrated Teeth

Winona Van Norman Rotary Broach Offset Workholding Finger 1/2" w/ Serrated Teeth

  • Council Grove, Kansas, United States
  • Oct 25th
Machine Tool Hold Down Parts With Cart

Machine Tool Hold Down Parts With Cart

  • Suffern, New York, United States
  • Oct 25th
3/8" x 1-3/4" Metal Dowel pack of 6

3/8" x 1-3/4" Metal Dowel pack of 6

  • Richmond, Indiana, United States
  • Oct 25th

People who viewed this item also vieved

Vee Block with Clamp 1 1/2 x 2 1/4 x 3 inches (Inv.25217)

Vee Block with Clamp 1 1/2 x 2 1/4 x 3 inches (Inv.25217)

  • Portland, Connecticut, United States
  • Jan 30th
Vee Block 3 1/2 x 2 x 6 in. long (Inv.25216)

Vee Block 3 1/2 x 2 x 6 in. long (Inv.25216)

  • Portland, Connecticut, United States
  • Jan 30th
Pair of Cast V Blocks 5 x 4 x 4 Inches 3-3/4 Across V (Inv.25215)

Pair of Cast V Blocks 5 x 4 x 4 Inches 3-3/4 Across V (Inv.25215)

  • Portland, Connecticut, United States
  • Jan 30th
Morse Taper #4 Live Center (Inv.29989)

Morse Taper #4 Live Center (Inv.29989)

  • Portland, Connecticut, United States
  • Jan 30th
ROYAL 10005-A 5-1592 5MT Double Bearing Interchangeable Point Live Center USA 3K

ROYAL 10005-A 5-1592 5MT Double Bearing Interchangeable Point Live Center USA 3K

  • Saint Louis, Missouri, United States
  • Jan 30th
ROYAL ROYAL Dead Center Carbide-Tipped Point POINT DIAMETER: 1.231"

ROYAL ROYAL Dead Center Carbide-Tipped Point POINT DIAMETER: 1.231"

  • Flushing, New York, United States
  • Jan 30th
ER32 BT50 M24 100L COLLET CHUCK CNC MILLING TOOLHOLDING MACHINIST ENGINEER #L126

ER32 BT50 M24 100L COLLET CHUCK CNC MILLING TOOLHOLDING MACHINIST ENGINEER #L126

  • Hong Kong, Hong Kong
  • Jan 30th
SCHUNK SZKA 263 TONGUE & GROOVE HARD TOP JAWS

SCHUNK SZKA 263 TONGUE & GROOVE HARD TOP JAWS

  • Cleveland, Ohio, United States
  • Jan 30th
12" Steel Jaws 1.5mm x 60 deg. serrations

12" Steel Jaws 1.5mm x 60 deg. serrations

  • Unionville, Connecticut, United States
  • Jan 30th
DE-STA-CO 527-F Clamp, NPM 55275, New In Bag

DE-STA-CO 527-F Clamp, NPM 55275, New In Bag

  • Warren, Michigan, United States
  • Jan 30th
ACA033, De-Sta-Co, Clamp Arm, New Old Stock

ACA033, De-Sta-Co, Clamp Arm, New Old Stock

  • Warren, Michigan, United States
  • Jan 30th
70221, De-Sta-Co, Threadded Clamp, 70221, New Old Stock

70221, De-Sta-Co, Threadded Clamp, 70221, New Old Stock

  • Warren, Michigan, United States
  • Jan 30th
LAST ONE! USED #3MT TAPER SHANK DA300 COLLET CHUCK EXTENSION DA-300

LAST ONE! USED #3MT TAPER SHANK DA300 COLLET CHUCK EXTENSION DA-300

  • Fairfield, Iowa, United States
  • Jan 30th
UNIVERSAL ENGINEERING CAT-50 V-FLANGE COLLET CHUCKS (158)

UNIVERSAL ENGINEERING CAT-50 V-FLANGE COLLET CHUCKS (158)

  • Odessa, Florida, United States
  • Jan 30th
UNIVERSAL ENGINEERING ACURA-GRIP CAT 50 V-FLANGE COLLET CHUCK / 172

UNIVERSAL ENGINEERING ACURA-GRIP CAT 50 V-FLANGE COLLET CHUCK / 172

  • Odessa, Florida, United States
  • Jan 30th
Golden Goose drill chuck with #2 morse taper and 13mm capacity with key

Golden Goose drill chuck with #2 morse taper and 13mm capacity with key

  • Wappingers Falls, New York, United States
  • Jan 30th
Armstrong #396 combo machine wrench

Armstrong #396 combo machine wrench

  • Wappingers Falls, New York, United States
  • Jan 30th
Work holding clamp for milling machine

Work holding clamp for milling machine

  • Wappingers Falls, New York, United States
  • Jan 30th
Lot Of 110 Panduit Mini Com Face Plates Cfpl2why 2 Port

Lot Of 110 Panduit Mini Com Face Plates Cfpl2why 2 Port

  • Saint James, Missouri, United States
  • Jan 30th
1pc EK8 and 1pc EF8 Ballscrew End Supports CNC USG

1pc EK8 and 1pc EF8 Ballscrew End Supports CNC USG

  • CN,CN, China
  • Jan 30th
1pc BK20 and 1pc BF20 Ballscrew End Supports CNC USG

1pc BK20 and 1pc BF20 Ballscrew End Supports CNC USG

  • CN,CN, China
  • Jan 30th
LOT OF 3 NEW ALLENAIR 612 ANTI-BACKUP PAWL MODEL 11-F FOR ROTARY INDEX TABLE

LOT OF 3 NEW ALLENAIR 612 ANTI-BACKUP PAWL MODEL 11-F FOR ROTARY INDEX TABLE

  • Apache Junction, Arizona, United States
  • Jan 30th
ONE NEW ALLENAIR 418 GEAR RACK FOR ROTARY INDEX TABLE

ONE NEW ALLENAIR 418 GEAR RACK FOR ROTARY INDEX TABLE

  • Apache Junction, Arizona, United States
  • Jan 30th
LOT OF 3 NEW ALLENAIR 1461 ACCESSORY PINS FOR ROTARY INDEX TABLE

LOT OF 3 NEW ALLENAIR 1461 ACCESSORY PINS FOR ROTARY INDEX TABLE

  • Apache Junction, Arizona, United States
  • Jan 30th
WOW!! WILTON #1260 VERTI-LOCK MILLING MILL MACHINE VISE - 6" X 1-3/4" JAWS

WOW!! WILTON #1260 VERTI-LOCK MILLING MILL MACHINE VISE - 6" X 1-3/4" JAWS

  • Chino, California, United States
  • Jan 30th
Columbian D4 D54 Vise Woodworking Metalworking 4" Anvil Free SHIPPING

Columbian D4 D54 Vise Woodworking Metalworking 4" Anvil Free SHIPPING

  • Saint Charles, Missouri, United States
  • Jan 30th
Eagle Rock Technologies - A1-21200 - Pneumatic Vise

Eagle Rock Technologies - A1-21200 - Pneumatic Vise

  • San Ramon, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies