+ Post new Ad
LNS Quick Load Servo Magazine Style Bar Feed System, US $7,500.00 – Picture 0
LNS Quick Load Servo Magazine Style Bar Feed System, US $7,500.00 – Picture 1
LNS Quick Load Servo Magazine Style Bar Feed System, US $7,500.00 – Picture 2
LNS Quick Load Servo Magazine Style Bar Feed System, US $7,500.00 – Picture 3
LNS Quick Load Servo Magazine Style Bar Feed System, US $7,500.00 – Picture 4
LNS Quick Load Servo Magazine Style Bar Feed System, US $7,500.00 – Picture 5
LNS Quick Load Servo Magazine Style Bar Feed System, US $7,500.00 – Picture 6
LNS Quick Load Servo Magazine Style Bar Feed System, US $7,500.00 – Picture 7
LNS Quick Load Servo Magazine Style Bar Feed System, US $7,500.00 – Picture 8
LNS Quick Load Servo Magazine Style Bar Feed System, US $7,500.00 – Picture 9
LNS Quick Load Servo Magazine Style Bar Feed System, US $7,500.00 – Picture 10
LNS Quick Load Servo Magazine Style Bar Feed System, US $7,500.00 – Picture 0
LNS Quick Load Servo Magazine Style Bar Feed System, US $7,500.00 – Picture 1
LNS Quick Load Servo Magazine Style Bar Feed System, US $7,500.00 – Picture 2
LNS Quick Load Servo Magazine Style Bar Feed System, US $7,500.00 – Picture 3
LNS Quick Load Servo Magazine Style Bar Feed System, US $7,500.00 – Picture 4
LNS Quick Load Servo Magazine Style Bar Feed System, US $7,500.00 – Picture 5
LNS Quick Load Servo Magazine Style Bar Feed System, US $7,500.00 – Picture 6
LNS Quick Load Servo Magazine Style Bar Feed System, US $7,500.00 – Picture 7
LNS Quick Load Servo Magazine Style Bar Feed System, US $7,500.00 – Picture 8
LNS Quick Load Servo Magazine Style Bar Feed System, US $7,500.00 – Picture 9
LNS Quick Load Servo Magazine Style Bar Feed System, US $7,500.00 – Picture 10

Lns Quick Load Servo Magazine Style Bar Feed System

US $7,500.00

  • Fountain Valley, California, United States
  • Jan 30th
Open on mobile:
QR code
General Specifications (Please Verify Details): PLC/CNC Servo Control Barstock Diameter: 1/2" - 3 1/8" Barstock Length: 6"- 55" Loader Rack Capacity: 37.5" Loader Rack: Front & Rear Mount Loading Time For New Bars: 22 Seconds Load New Bar While Machining Last Part: Yes Linear Guide Ways: Yes Change Over Time: 2 - 3 Minutes Operator Controls: Portable Pendant Air Requirements: 80 PSI Dimensions (approx): 55" X 70" Weight (approx): 1,260 LBS

Directions

Similar products from Other Workholding Tools

NEW PRESS FIT DIAMOND LPP-5340 LOCATING PIN LPP5340

NEW PRESS FIT DIAMOND LPP-5340 LOCATING PIN LPP5340

  • Mount Pleasant, Michigan, United States
  • Jan 30th
Cleko - Loc clamp & Side Grip Lot

Cleko - Loc clamp & Side Grip Lot

  • Mount Airy, North Carolina, United States
  • Jan 30th
Rapid Air C-6 C6 Feeder

Rapid Air C-6 C6 Feeder

  • Schwenksville, Pennsylvania, United States
  • Jan 30th
28 PIECE MIXED BROWN & SHARPE STUB COLLETS & FEEDING FINGERS, 22M, 11AM

28 PIECE MIXED BROWN & SHARPE STUB COLLETS & FEEDING FINGERS, 22M, 11AM

  • Euclid, Ohio, United States
  • Jan 30th
(4) Jergens 19705 Fixture Key 3/4 Standard

(4) Jergens 19705 Fixture Key 3/4 Standard

  • Kansas City, Missouri, United States
  • Jan 30th
SPI 7 Pc JACK SCREW SET A731

SPI 7 Pc JACK SCREW SET A731

  • Montville, Ohio, United States
  • Jan 30th
K860451 JB-71859 2" Boring Bar Holder Clamp 2-1/2"x 4-1/8" Mounting Pattern

K860451 JB-71859 2" Boring Bar Holder Clamp 2-1/2"x 4-1/8" Mounting Pattern

  • Middlebury, Indiana, United States
  • Jan 30th
BROWN & SHARPE Ultra Precision Wavy Parallel Set - Model: 599-921-25

BROWN & SHARPE Ultra Precision Wavy Parallel Set - Model: 599-921-25

  • Flushing, New York, United States
  • Jan 30th
9" Drill Press Locking Clamp Vise Grip Pliers * Heavy Duty * 9 Inch

9" Drill Press Locking Clamp Vise Grip Pliers * Heavy Duty * 9 Inch

  • Sebastian, Florida, United States
  • Jan 30th
BAR PULLER STOCK FEEDER IN YOUR TURRET UP TO 2-1/2 BP2

BAR PULLER STOCK FEEDER IN YOUR TURRET UP TO 2-1/2 BP2

  • Waterbury, Connecticut, United States
  • Jan 30th
Misumi Stand Mount 10mm Diameter x 140mm Long MSFSTN10-140 NEW

Misumi Stand Mount 10mm Diameter x 140mm Long MSFSTN10-140 NEW

  • Kitchener, Ontario, Canada
  • Jan 30th
2 machine shop grinding arbors milling work holding 3/4 x 1 and 3/8 x 1/4 used

2 machine shop grinding arbors milling work holding 3/4 x 1 and 3/8 x 1/4 used

  • Warren, Michigan, United States
  • Jan 30th
Fairlane Round Positioning Gripper 5/8" Dia 1/4-28 Thread 4Pt Carbide Tip

Fairlane Round Positioning Gripper 5/8" Dia 1/4-28 Thread 4Pt Carbide Tip

  • Middlebury, Indiana, United States
  • Jan 30th
LIVE CENTER, CARBIDE TIPPED, BEARING CARTRIDGE ~NEW~SURPLUS~

LIVE CENTER, CARBIDE TIPPED, BEARING CARTRIDGE ~NEW~SURPLUS~

  • Orwell, Ohio, United States
  • Jan 30th
TTC 4 Pair Thin Parallel Set - Model: TP-4 HEIGHT : 1/2",5/8",3/4",7/8"

TTC 4 Pair Thin Parallel Set - Model: TP-4 HEIGHT : 1/2",5/8",3/4",7/8"

  • Flushing, New York, United States
  • Jan 30th
TTC PRECISION STEELPARALLEL TP-114

TTC PRECISION STEELPARALLEL TP-114

  • Flushing, New York, United States
  • Jan 30th
BROWN & SHARPE Ultra Precision Ground Parallel Set 599-921-4 THICKNESS 1/4"

BROWN & SHARPE Ultra Precision Ground Parallel Set 599-921-4 THICKNESS 1/4"

  • Flushing, New York, United States
  • Jan 30th
Hydra-Lock AC34371 Pin

Hydra-Lock AC34371 Pin

  • Peoria, Illinois, United States
  • Jan 30th
Lot of 4 Locating Pins

Lot of 4 Locating Pins

  • Peoria, Illinois, United States
  • Jan 30th
Caterpillar .375-IN-DIA Timing Pin

Caterpillar .375-IN-DIA Timing Pin

  • Peoria, Illinois, United States
  • Jan 30th

People who viewed this item also vieved

USED UNIVERSAL ENGINEERING ACURA FLEX AF76 COLLET 13/32 (.4063)

USED UNIVERSAL ENGINEERING ACURA FLEX AF76 COLLET 13/32 (.4063)

  • Fairfield, Iowa, United States
  • May 24th
REGO-FIX PRECISION COLLET (ER 20) 1220.0500 5.00mm tooling tool

REGO-FIX PRECISION COLLET (ER 20) 1220.0500 5.00mm tooling tool

  • Murphy, North Carolina, United States
  • May 24th
Sandvik 393.14-20 110 428E Rotating Holder Collet Tooling

Sandvik 393.14-20 110 428E Rotating Holder Collet Tooling

  • Murphy, North Carolina, United States
  • May 24th
MAGNETIC V BLOCK & MAG. SQUARING BLOCK

MAGNETIC V BLOCK & MAG. SQUARING BLOCK

  • Muncie, Indiana, United States
  • May 25th
BROWN & SHARPE 6X12 COMPOUND SINE PLATE STK 9239

BROWN & SHARPE 6X12 COMPOUND SINE PLATE STK 9239

  • Wadley, Alabama, United States
  • May 25th
10" A1-B BACK PLATE FOR 3 OR 4 JAW CHUCK

10" A1-B BACK PLATE FOR 3 OR 4 JAW CHUCK

  • Pinellas Park, Florida, United States
  • May 25th
De-Sta-Co DE-STA-CO 2005-S Horizontal Handle Hold Down Action Clamp

De-Sta-Co DE-STA-CO 2005-S Horizontal Handle Hold Down Action Clamp

  • USA, United States
  • May 26th
De-Sta-Co DE-STA-CO 603-SS Straight Line Plunger Clamp

De-Sta-Co DE-STA-CO 603-SS Straight Line Plunger Clamp

  • USA, United States
  • May 26th
De-Sta-Co DE-STA-CO 601-SS Straight-Line Action Clamp

De-Sta-Co DE-STA-CO 601-SS Straight-Line Action Clamp

  • USA, United States
  • May 26th
HOWA 6-1/2" CNC LATHE POWER CHUCK A6 MOUNT #H07MA6 STK 6395

HOWA 6-1/2" CNC LATHE POWER CHUCK A6 MOUNT #H07MA6 STK 6395

  • Wadley, Alabama, United States
  • May 27th
6 INCH L-MOUNT (L-00) BACK PLATE FOR 3-JAW CHUCK - NO BOLT HOLES (3900-4847)

6 INCH L-MOUNT (L-00) BACK PLATE FOR 3-JAW CHUCK - NO BOLT HOLES (3900-4847)

  • Chino, California, United States
  • May 27th
10 INCH D-8 MOUNT BACK PLATE FOR 3-JAW CHUCKS (3900-4837)

10 INCH D-8 MOUNT BACK PLATE FOR 3-JAW CHUCKS (3900-4837)

  • Chino, California, United States
  • May 27th
V C COLUMBIAN 606M3 MACHINIZE SWIVEL BASE VISE BLACKSMITH GUNSMITH WILTON BULLET

V C COLUMBIAN 606M3 MACHINIZE SWIVEL BASE VISE BLACKSMITH GUNSMITH WILTON BULLET

  • San Diego, California, United States
  • May 27th
1" X 3FL X 2.3LOC X 5" OAL CARBIDE ROUGHING END MILL PERFECT FOR ALUMINUM

1" X 3FL X 2.3LOC X 5" OAL CARBIDE ROUGHING END MILL PERFECT FOR ALUMINUM

  • Ventura, California, United States
  • May 27th
1" X 90 DEG(45 per side) XLONG 4FLUTE CARBIDE CHAMFER END MILL FOR HARD MATERIAL

1" X 90 DEG(45 per side) XLONG 4FLUTE CARBIDE CHAMFER END MILL FOR HARD MATERIAL

  • Ventura, California, United States
  • May 28th
Royal MT3 Dead Center Extended Bull Point Morse Taper Metal Lathe Machinist Too

Royal MT3 Dead Center Extended Bull Point Morse Taper Metal Lathe Machinist Too

  • Yorktown, Virginia, United States
  • May 28th
#49 Lathe Mandrel Machinist Tool Center Wrk Metal Southbend Clausing Atlas Logan

#49 Lathe Mandrel Machinist Tool Center Wrk Metal Southbend Clausing Atlas Logan

  • Yorktown, Virginia, United States
  • May 28th
Bull Nose Dead Center 3/4 - 3-1/4" Straight 1.25 Shank SS Metal Lathe Turret CNC

Bull Nose Dead Center 3/4 - 3-1/4" Straight 1.25 Shank SS Metal Lathe Turret CNC

  • Yorktown, Virginia, United States
  • May 28th
Troyke Mfg. Co. R-42 Rotary Table 12 Inch Diameter T slots

Troyke Mfg. Co. R-42 Rotary Table 12 Inch Diameter T slots

  • Warren, Michigan, United States
  • Jun 8th
Sherline Rotary Table (4") # 3700

Sherline Rotary Table (4") # 3700

  • North Myrtle Beach, South Carolina, United States
  • Jun 8th
NEW! INDEX DESIGNS CNC VH8 FADAL 8" Diameter 4th-Axis Rotary Table MADE in USA

NEW! INDEX DESIGNS CNC VH8 FADAL 8" Diameter 4th-Axis Rotary Table MADE in USA

  • Chatsworth, California, United States
  • Jun 8th
RTS Prestige 25542040 Quadruple V Block 4 Way 3-3/4" x 2-3/4" x 1-3/8" NEW

RTS Prestige 25542040 Quadruple V Block 4 Way 3-3/4" x 2-3/4" x 1-3/8" NEW

  • Saint Charles, Missouri, United States
  • Jun 9th
M18 Red Battery and M-12

M18 Red Battery and M-12

  • Jefferson City, Missouri, United States
  • Jun 9th
MACHINISTS PARALLEL SET - 4 PAIR w/Box - Precision/Blocks/Tool Maker/Toolmaker

MACHINISTS PARALLEL SET - 4 PAIR w/Box - Precision/Blocks/Tool Maker/Toolmaker

  • Twinsburg, Ohio, United States
  • Jun 9th
Queen & Co Bling Book Limited Edition-Christmas

Queen & Co Bling Book Limited Edition-Christmas

  • Hickory Hills, Illinois, United States
  • Jun 11th
"Doodlebug Double-Sided Paper Pack 12""X12""-Goal!!"

"Doodlebug Double-Sided Paper Pack 12""X12""-Goal!!"

  • Hickory Hills, Illinois, United States
  • Jun 11th
"Basix Fixed Circular Needles 24""-Size 6/4mm"

"Basix Fixed Circular Needles 24""-Size 6/4mm"

  • Hickory Hills, Illinois, United States
  • Jun 11th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies