Logic eNet Controller LS6000, US $200.00 – Picture 0

Logic eNet Controller LS6000, US $200.00 – Picture 1

Logic Enet Controller Ls6000

US $200.00

Lawton, Oklahoma, United States
Jan 30th

Open on mobile:
QR code

never used but opened to check. Overview It is designed to meet the most demanding requirements of today’s kitchen video display systems. Logic Controls Logic Net solution has been widely regarded as the most reliable KDS hardware solution on the market for the past decade. It has been deployed by some of the largest restaurant chains in the world as well as thousands of small local restaurants. This is one of the reasons why the Logic Net solution is supported by over 20 POS software partners. The LS6000 module uses no internal cables, hard disk drives, fans, or mechanical moving parts that can easily fail. The enclosure is a heavy-duty die cast case for extra ruggedness. Every module uses snap-to-lock connectors for secure connections. The LS6000 module consumes less than 1.5 watts of power, ideal for reliable operation in the hot kitchen environment. In addition, the module is tamper proof, without on/off or selection switches and no adjustable devices. The LS6000 module can replace costly and ill-suited PC workstations with network software. To add more stations, simply add more LS6000 modules. No special interface cards or additional hardware is required for the LS6000 module to communicate with peripheral devices. In addition, upgrading LS6000 for enhanced functionality is easy with remote downloadable firmware and character fonts. The LS6000 module has a very compact form factor – only 1.0”h x 6.3”w x 5.1”d. Two mounting tabs enable these modules to be mounted almost anywhere – on a display monitor arm, wall, ceiling or under a counter. The LS6000 module also uses standard Ethernet connection to a system hub to communicate with the server or workstation running the kitchen production management software. Features IP addressable module, Ethernet topology Compact 1.0”h x 6.3”w x 5.1”d form factor Highly reliable and rugged, fanless operation Low cost, no operating system (OS) required Powerful self-diagnostics Optional color build-card display function I/O ports to drive bump bar, serial printer, VGA monitor or touch screen monitor. Optional internal Compact Flash (CF) for graphic image and program storage High security, immune to malicious software Simple to install, maintain and upgrade Remote download of graphic images, firmware, and code page fonts Specifications Mechanical Weight 2.25lbs Dimension (in inches) 6.3W x 1.0H x 5.1D Electrical Input voltage 100 to 240VAC Input frequency 47 to 63 Hz Input current: < 1000mA @ 120VAC Output voltage: +5VDC Output current: < 1A Ripple voltage < 100mV p/p Environmental Operating Temperature: 5°C to 40°C Storage temperature: 0°C to 60°C Relative humidity: 5 to 80%, non-condensing Interface Ethernet 10Baset VGA Bump Bar or PC keyboard Serial port Baud Rate: 2400. 4800, 9600, 19200 Parity: none Data Bits: 8 Connectors General Connectors: to be latched/strain relief RS232: Standard, DB9 female connector Ethernet: 8 pin modular RJ45 male connector VGA: Standard, high density, DB15 male connector Keyboard: 6 pin modular shielded RJ11, male connector