" Long Gun " Spray Can Foam Insulation Aplicator Tool

US $36.95

Grand Rapids, Michigan, United States
Jan 30th

Open on mobile:
QR code

" The Long Gun" The "Long Gun" offers reduced bending and reaching do to its extra long nozzle, and is a reliable alternative to the more expensive can foam guns. With proper care and cleaning this gun can last as long as the more expensive ones. No replacement parts are offered for this gun, but the internal moving parts are Teflon coated for added protection from corrosion. *****PLEASE NOTE***** There are two types of can foam; "Gun Foam, and Straw Foam (used w/ a plastic straw)". They produce similar foam results. Gun foams offer greater control and savings, as you can use some now and later. Our guns, like all foam guns, work with all “gun foams”. And who’s ever "gun foam" you choose to use; they will also sell a Gun cleaner. This cleaner will have the same style attachment as the foam. Your gun will not need to be cleaned after each use. You should never store your gun with an empty can, OR without a can attached, and always store with full or partial can upside down(Gun upright). Use the cleaner to "flush" the gun every 6 to 8 cans when using consistently. If you store the gun, as said above, for a length of time (a month or longer), finish the attached can of foam upon the next use, remove and attach the cleaner. Use only 10 to 15% of the cleaner to flush the gun, attach a new can of foam and your ready to go. While hardened foam on the outside is more difficult to remove, you will be able to get it off using the cleaner in small amounts. IMPORTANT; be very careful not to scratch or damage the "Ball stopper" in the gun where the can attaches! INTERNATIONAL SHIPPING RATES TO BE DETERMINED BY LOCATION. "PLEASE REQUEST A QUOTE FIRST". !!!!!IMPORTANT!!!!! +++++PLEASE NOTE+++++ Payment must be received before your products can be shipped. Any payment other than PayPal can cost delays in your shipment. I apologize for any inconvenience this may cause. If you have any special shipping needs Please let me know, so I can give you the best possible service. We value your input so if you have any thoughts ideas, comments, or concerns, please tell me. Thanks, Dave On Feb-02-08 at 06:57:14 PST, seller added the following information: On Nov-26-08 at 04:54:15 PST, seller added the following information: On May-12-09 at 02:10:04 PDT, seller added the following information: The "Long Gun" Nozzle is 19" long.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Product Type	Insulation
Features	"Long Reach Nozzle"
Material	Steel w/Teflon coatings