LOT 10 - New NEMA 17 High Torque Bipolar Stepper Motor Reprap 3d Printer 56.6 oz, US $119.99 – Picture 0

LOT 10 - New NEMA 17 High Torque Bipolar Stepper Motor Reprap 3d Printer 56.6 oz, US $119.99 – Picture 1

LOT 10 - New NEMA 17 High Torque Bipolar Stepper Motor Reprap 3d Printer 56.6 oz, US $119.99 – Picture 2

LOT 10 - New NEMA 17 High Torque Bipolar Stepper Motor Reprap 3d Printer 56.6 oz, US $119.99 – Picture 3

Lot 10 - New Nema 17 High Torque Bipolar Stepper Motor Reprap 3d Printer 56.6 Oz

US $119.99

Chicago, Illinois, United States
Jan 29th

Open on mobile:
QR code

Listing is for ten (10) new motors with connection lead wire for each motor (as pictured). FAST SHIPPING with PRIORITY MAIL!! I make every effort to ship upon payment without delay. Item is in-stock and ships from the USA. 100% positive feedback!!! I'm not happy unless you are a satisfied customer. Here are some recent comments.... Item as described, fast shipping too! NEMA 17 High Torque 40Ncm 56.6 oz 1.2A Stepper Motor Reprap 3d Printer (#121200112426) Great vendor!!! NEMA 17 High Torque 40Ncm 56.6 oz 1.2A Stepper Motor Reprap 3d Printer (#121200112426) Quick ship, product as described and well packed! NEMA 17 56.6 oz 1.2A 40N-cm High Torque Bipolar Stepper Motor Reprap 3d Printer (#121156347386) These work nicely in my Shapeoko. Good, fast shipping. New NEMA 17 High Torque Bipolar Stepper Motor: Reprap 3d Printer (#121140787713) Great no hassle sell. A++ E-Seller NEMA 17 High Torque Stepper Motor: Reprap 3d Printer Prusa i3 CNC Mendel Rostock (#121128720056) Very satisfied New NEMA 17 High Torque Bipolar Stepper Motor Reprap 3d Printer 56.6 oz (#121237477697) Great product, fast shipper, will buy again! A++ NEW NEMA 17 High Torque 40Ncm 56.6 oz 1.2A Stepper Motor Reprap 3d Printer (#121240876788) OUTSTANDING SELLER HERE VERY QUICK ON SHIP WELL PACKED THANKS!!! NEMA 17 High Torque Bipolar Stepper Motor: Reprap 3d Printer 56.6 oz (#121223311416) Motors are imported, new from factory, high-quality,high-torque steppers perfect for filament extruders and 3d Printers: Prusa, CNC Router, Mill, Makerbot, Printrbot, Mendel, Rostock, i2, i3, MENDELMAX, Cupcake CNC, Thing-O-Matic, etc. Specifications: 200 steps per revolution (1.8 deg/step) 42.3mm x 42.3mm x 40mm deep (NEMA 17) NEMA-17 is a standard motor mounting geometry.The outside of the motor housing is 1.7"x1.7". 2 Phase Rated Voltage 2V DC Rated Current 1.2A Phase Resistance: 1.7 Ohm ± 10% (20? C) Phase inductance: 4.5 mH ± 20% (1kHz 1 V rms) Holding torque: 40N-cm 0.4N-m 4076g-cm 56.6 oz.in 4.0788Kg-cm 3.54lb-in 0.2948lb-ft 0.0404Kg-m Shaft diameter: 5mm / 0.188" (3/16") Shaft length: 20mm round with one flat Motor depth: 40mm I do not have instructions for printer assembly or wiring. Please reference your printer manual for instructions. These motors come with a conventional four-wire color coded harness which should be compatible with most electronics. For a good deal of additional information, visit http://www.reprap.org/wiki/Stepper_motor ------------------------ 2V is the correct rating and is very common. Current control is required with your motor drivers to use higher voltage, such as 12 volts. Pololu stepper drivers with overcurrent protection work great. Power and current: All stepper motors will have certain specifications for voltage and current (typically 2.8 V and 1.68 A); as long as the stepper driver/controller does current control, you can use any supply voltage greater than the motor's rated voltage. In fact, a large difference is advantageous to the top speed of the motor. -------------------- (if you have any more questions please let me know) ------------ Return Policy (please read)... 100% customer satisfaction is our number one priority. Please leave positive feedback if you are satisfied with your purchase. We do leave positive feedback for you once your item ships. If you have any problem please let us try to make it right!! All purchases are inspected for damage prior to careful packaging and shipping. Please inspect items upon arrival for any damage that may have occurred during transit. In the unlikely event that you need to return an item, please include all original items, undamaged, in resalable condition along with original packaging. There is never a restocking fee for returned items. Electronics or motors damaged by the buyer cannot be refunded. Shipping fees are not refundable. Buyer is responsible for shipping costs incurred shipping products back.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	UIROBOT
MPN	17HS3001
Model	17HS3001
Country/Region of Manufacture	China