LOT MORE THAN 84 HILTI ANCHORS M-10 AND M12 ANCHORS CONCRETE FASTENERS 5", US $299.99 – Picture 0

LOT MORE THAN 84 HILTI ANCHORS M-10 AND M12 ANCHORS CONCRETE FASTENERS 5", US $299.99 – Picture 1

LOT MORE THAN 84 HILTI ANCHORS M-10 AND M12 ANCHORS CONCRETE FASTENERS 5", US $299.99 – Picture 2

LOT MORE THAN 84 HILTI ANCHORS M-10 AND M12 ANCHORS CONCRETE FASTENERS 5", US $299.99 – Picture 3

LOT MORE THAN 84 HILTI ANCHORS M-10 AND M12 ANCHORS CONCRETE FASTENERS 5", US $299.99 – Picture 4

LOT MORE THAN 84 HILTI ANCHORS M-10 AND M12 ANCHORS CONCRETE FASTENERS 5", US $299.99 – Picture 5

LOT MORE THAN 84 HILTI ANCHORS M-10 AND M12 ANCHORS CONCRETE FASTENERS 5", US $299.99 – Picture 6

LOT MORE THAN 84 HILTI ANCHORS M-10 AND M12 ANCHORS CONCRETE FASTENERS 5", US $299.99 – Picture 7

LOT MORE THAN 84 HILTI ANCHORS M-10 AND M12 ANCHORS CONCRETE FASTENERS 5", US $299.99 – Picture 8

LOT MORE THAN 84 HILTI ANCHORS M-10 AND M12 ANCHORS CONCRETE FASTENERS 5", US $299.99 – Picture 9

LOT MORE THAN 84 HILTI ANCHORS M-10 AND M12 ANCHORS CONCRETE FASTENERS 5", US $299.99 – Picture 10

Lot More Than 84 Hilti Anchors M-10 And M12 Anchors Concrete Fasteners 5"

US $299.99

Blair, Nebraska, United States
Mar 6th

Open on mobile:
QR code

THIS SALE IS FOR MORE THAN 84 BRAND NEW HILTI ANCHORS! YOUR GAIN FOR SURE !! THERE ARE DIFFERENT LENGTHS ALSO I HAVE NOT COUNTED THEM BUT A BOX OF 8 OF THESE ANCHORS SELLS FOR AROUND $200.00 OR MORE FROM HILTI HILTI HLS-3 M10/100 M10/125 M10/50 HILTI HLS-3 M12/100 EXPANSION ANCHORS HILTI HLS-3-G M12/100 EXPANSION ANCHORS HLS-3-G THREADED STUD VERSION M12/100 THE END TO END LENGTH IS 210mm / 21cm MINIMUM EMBEDMENT IS 100mm THESE ANCHORS CAN BE SHORTENED TO SUIT YOUR APPLICATION! JUST CUT THE SLEEVE AND THE THREADED STUD THE SAME LENGTH AND YOU HAVE A SHORTER ANCHOR W/O SACRIFICING THE INTEGRITY OF THE ANCHOR! ! FROM 100mm EMBEDMENT LENGTH TO AS SHORT AS 25mm EMBEDMENT LENGTH ! ! I WILL ANSWER ALL YOUR QUESTIONS ABOUT THESE ANCHORS PLEASE ASK AWAY!!! I NEED TO SELL THESE NOW!!!! NO REASONABLE OFF WILL BE REFUSED! FREE SHIPPING ALSO!! HILTI HSL-3 CARBON STEEL HEAVY DUTY EXPANSION ANCHORS FOR CRACKED AND UNCRACKED CONCRETE 1.0 EVALUATION SCOPE Compliance with the following codes: # 2006 International Building Code® (IBC) # 2006 International Residential Code® (IRC) # 1997 Uniform Building Code™ (UBC) Property evaluated: Structural 2.0 USES The Hilti HSL-3 Heavy Duty Expansion Anchor is used to resist static, wind, and seismic tension and shear loads in cracked and uncracked normal-weight and structural sand-lightweight concrete having a specified compressive strength 2,500 psi # fNc # 8,500 psi (17.2 MPa # fNc # 58.6 MPa). The anchoring system is an alternative to cast-in-place anchors described in Sections 1911 and 1912 of the IBC and Section 1923 of the UBC. The Hilti HSL-3 Carbon Steel Heavy Duty Expansion Concrete Anchor, designated as the HSL-3, is a torque-set, sleeve-type mechanical expansion anchor. The HSL-3 is comprised of seven components which vary slightly according to anchor diameter. All carbon steel parts receive a minimum 5 :m thick galvanized zinc coating. The anchor consists of a stud bolt, steel washer, steel sleeve, collapsible plastic sleeve, steel expansion sleeve and steel cone. This anchor is available in carbon steel only. The material specifications are as follows: • Bolt: Carbon steel per DIN EN ISO 898-1, Grade 8.8 • Washer: Carbon steel per DIN EN 10025. • Expansion cone: Carbon steel per DIN 1654-4. • Expansion sleeve: Carbon steel , M8-M16 per DIN 10139, M20-M24 per DIN 2393-2. • Steel sleeve: Carbon steel per DIN 2393-1. • Collapsible sleeve: Acetal polyoxymethylene (POM) resin. Application of torque at the head of the anchor causes the cone to be drawn into the expansion sleeve. This in turn causes the sleeve to expand against the wall of the drilled hole. The ribs on the collapsible element prevent rotation of the sleeve and cone during application of torque. Application of the specified installation torque induces a tension force in the bolt that is equilibrated by a precompression force in the concrete acting through the component being fastened. Telescopic deformation of the collapsible element prevents buildup of precompression in the anchor sleeve in cases where the shear sleeve is in contact with the washer, and permits the closure of gaps between the work surface and the component being fastened. Application of tension loads that exceed the precompression force in the bolt will cause the cone to displace further into the expansion sleeve (follow-up expansion), generating additional expansion force. Please feel free to contact me with any questions or concerns. 402-278-2902 I guarantee your complete satisfaction and I take pride in my 100% feedback rating. I also ask if there is any concerns what so ever with your item or items, that you contact me immediately. Remember that these items are described as best possible. Customer satisfaction is my number one priority ! ! THANKS JC ! !

Condition:	New: A brand-new, unused, unopened, undamaged item (including handmade items). See the seller's listing for full details. ...	Brand	HILTI
Country/Region of Manufacture	Germany