+ Post new Ad
Lot of 2 - Machinist V Blocks with Clamps, US $150 – Picture 0
Lot of 2 - Machinist V Blocks with Clamps, US $150 – Picture 1
Lot of 2 - Machinist V Blocks with Clamps, US $150 – Picture 0
Lot of 2 - Machinist V Blocks with Clamps, US $150 – Picture 1

Lot Of 2 - Machinist V Blocks With Clamps

US $150

  • Spring, Texas, United States
  • Oct 21st
Open on mobile:
QR code
We only ship to the lower 48 states of the United States and not internationally. Please ensure that you have understood the product details and raise any questions before bidding or purchasing the product. As we accept PayPal as the mode of payment, the payment for the product is due within 24 hours of the auction end. Any delay in payment will lead to action as per eBay policy. By bidding or winning this auction, you agree to the eBay and PayPal policy. We inspect and test our items before shipment to ensure that they match up with the description provided. However, we urge you to ask any relevant questions before putting up a bid. If you receive any wrong items, contact us immediately to initiate corrective measures. Thank you for your interest in our product, do visit us again for more such machinist tools. Lot of 2 - Machinist V Blocks with Clamps - Description The shipping rates are non-negotiable, and any additional services for shipping like insurance or delivery confirmation is included in the given shipping cost. All shipping charges cited are mere estimates as it is challenging to determine pricing for certain items due to zoning used by shipping services. Therefore, we strive to keep the cost in line with that of the shipping services. This auction item is a set of two machinist V blocks along with clamps. The condition of the blocks is average with some signs of wear from use. The red cap block measures 2.5"x2.5"x1.75" while the black cap block measures 2.5"x2.25"x2". The item code for this product is Z1. We have provided a detailed description of the item as per our best knowledge. However, the items are not tested by us, and we are not experts on their specific usage. We are open to answering any questions and will provide further information to the best of our ability. The product comes as shown in the photo, and any surface rust or engravings may be present. Measuring equipment used to depict the size of the blocks in the photos is not included in the package. All sizes mentioned in the description are approximate.

Directions

Similar products from Supporting Blocks & Sets

2 ANTIQUE INDUSTRIAL MAGNETIC BUSINESS CARD HOLDERS? PRUYN BEARINGS,AMERICAN GEA

2 ANTIQUE INDUSTRIAL MAGNETIC BUSINESS CARD HOLDERS? PRUYN BEARINGS,AMERICAN GEA

  • Levittown, Pennsylvania, United States
  • Oct 22nd
Craftsman # 4083 "V" Block & Clamp Set - Machinist Tool

Craftsman # 4083 "V" Block & Clamp Set - Machinist Tool

  • Cobleskill, New York, United States
  • Oct 22nd
Veritas # O5N58.01 SetUp Block Set - 1/16" to 3/4" and 1 2 3 Block

Veritas # O5N58.01 SetUp Block Set - 1/16" to 3/4" and 1 2 3 Block

  • Cobleskill, New York, United States
  • Oct 22nd
Machinist's Thin Parallel Bar Set - 10 Pair 1/8" X 6"

Machinist's Thin Parallel Bar Set - 10 Pair 1/8" X 6"

  • Multiple, United States
  • Oct 22nd
Suburban Magnetic V Block

Suburban Magnetic V Block

  • Millstone Township, New Jersey, United States
  • Oct 22nd
STARRETT NO. 567 TOOLMAKERS V-BLOCK COMPLETE W/CLAMP

STARRETT NO. 567 TOOLMAKERS V-BLOCK COMPLETE W/CLAMP

  • Tulsa, Oklahoma, United States
  • Oct 22nd
Machinist Work Holding Set Up V Block 2 1/2" x 2" x 2"

Machinist Work Holding Set Up V Block 2 1/2" x 2" x 2"

  • Youngstown, Ohio, United States
  • Oct 21st
SPI 20-682-1 - .130-.230 .001GRAD HOLE GAGE

SPI 20-682-1 - .130-.230 .001GRAD HOLE GAGE

  • Glenview, Illinois, United States
  • Oct 21st
Pair Of Generic Angle Blocks 4" x 2-3/4" x 1-3/4

Pair Of Generic Angle Blocks 4" x 2-3/4" x 1-3/4

  • Garden City, Idaho, United States
  • Oct 21st
Lot of 4 - Machinist V Blocks

Lot of 4 - Machinist V Blocks

  • Spring, Texas, United States
  • Oct 21st
Woodstock W1109 Broset Precision Stop Block , New,

Woodstock W1109 Broset Precision Stop Block , New,

  • Macedonia, Illinois, United States
  • Oct 21st
Starret 278 V-BLOCKS (Pair) & 1 single Lufkin Rule 905 V-BLOCK BUNDLE SET

Starret 278 V-BLOCKS (Pair) & 1 single Lufkin Rule 905 V-BLOCK BUNDLE SET

  • Yonkers, New York, United States
  • Oct 21st
Machinist's 20 pc Thin Parallel bar set, 1/8" x 6"

Machinist's 20 pc Thin Parallel bar set, 1/8" x 6"

  • Kewadin, Michigan, United States
  • Oct 21st
4 MATCHED PRECISION GROUND MACHINIST 1-2-3 BLOCKS SET UP FIXTURES Lot206

4 MATCHED PRECISION GROUND MACHINIST 1-2-3 BLOCKS SET UP FIXTURES Lot206

  • Nashville, Tennessee, United States
  • Oct 20th
2 Machinist V Blocks 5" X 3" X 2"

2 Machinist V Blocks 5" X 3" X 2"

  • Corona, California, United States
  • Oct 20th
Spi 30-440-2 Digital Caliper

Spi 30-440-2 Digital Caliper

  • Glenview, Illinois, United States
  • Oct 20th
NEW 4" MEDIUM GRIT REPLACEMENT STONES FOR 2833 ENGINE CYLINDER HONE MADE IN USA

NEW 4" MEDIUM GRIT REPLACEMENT STONES FOR 2833 ENGINE CYLINDER HONE MADE IN USA

  • Xenia, Ohio, United States
  • Oct 20th
LOT OF NEW & USED USA MADE COMBINATION DRILL AND COUNTERSINKS CENTERDRILLS #8

LOT OF NEW & USED USA MADE COMBINATION DRILL AND COUNTERSINKS CENTERDRILLS #8

  • Xenia, Ohio, United States
  • Oct 20th
14 PCS LOT OF 5C COLLET SIZES INCLUDE 23/32 13/16 29/32 13/32 AND MANY MORE

14 PCS LOT OF 5C COLLET SIZES INCLUDE 23/32 13/16 29/32 13/32 AND MANY MORE

  • Xenia, Ohio, United States
  • Oct 20th
NEW 1" WIDE 10" DIA 5" I.D. SCOTCH BRITE DEBURING WHEEL WITH ADAPTOR/ARBOR

NEW 1" WIDE 10" DIA 5" I.D. SCOTCH BRITE DEBURING WHEEL WITH ADAPTOR/ARBOR

  • Xenia, Ohio, United States
  • Oct 20th

People who viewed this item also vieved

Precision Bison Live Center # 6 MT Part No. 7-565-006

Precision Bison Live Center # 6 MT Part No. 7-565-006

  • Columbus, Ohio, United States
  • Jan 30th
Pratt & Whitney Jig bore Center, 2A 3B Nose collet lyndex digital R#0097BR

Pratt & Whitney Jig bore Center, 2A 3B Nose collet lyndex digital R#0097BR

  • Dayton, Ohio, United States
  • Jan 30th
MT3 Morse Taper Pro-Quality Live Center-New

MT3 Morse Taper Pro-Quality Live Center-New

  • Chino, California, United States
  • Jan 30th
7 1/2" DIA LATHE CHUCK LOGAN LEBLOND SOUTH BEND HARDINGE CLAUSING MONARCH ETC.

7 1/2" DIA LATHE CHUCK LOGAN LEBLOND SOUTH BEND HARDINGE CLAUSING MONARCH ETC.

  • Hillsborough, New Jersey, United States
  • Jan 30th
7 1/2" DIA BUCK AJUST TRU LATHE CHUCK LOGAN SOUTH BEND HARDINGE CLAUSING MONARCH

7 1/2" DIA BUCK AJUST TRU LATHE CHUCK LOGAN SOUTH BEND HARDINGE CLAUSING MONARCH

  • Hillsborough, New Jersey, United States
  • Jan 30th
7 1/2" DIA SOUTH BEND 14 1/2" OR 16" LATHE CHUCK 2 3/8" x 6 TPI

7 1/2" DIA SOUTH BEND 14 1/2" OR 16" LATHE CHUCK 2 3/8" x 6 TPI

  • Hillsborough, New Jersey, United States
  • Jan 30th
Lot of 35 Pull Action U-Bar Latch Toggle Clamp

Lot of 35 Pull Action U-Bar Latch Toggle Clamp

  • Sun Valley, California, United States
  • Jan 30th
Model No 431 DeStaCo Squeeze Action Clamp 100 lbs max. 2 15/16" Jaw Depth

Model No 431 DeStaCo Squeeze Action Clamp 100 lbs max. 2 15/16" Jaw Depth

  • Victorville, California, United States
  • Jan 30th
DIECRAFT No.408 FORGED STEEL C CLAMP 8" RANGE

DIECRAFT No.408 FORGED STEEL C CLAMP 8" RANGE

  • Walled Lake, Michigan, United States
  • Jan 30th
MACHINIST TOOL LATHE MILL Record Power Collet Chuck Set in Box AUC 35

MACHINIST TOOL LATHE MILL Record Power Collet Chuck Set in Box AUC 35

  • Morris Plains, New Jersey, United States
  • Jan 30th
Erickson Tool (Kennametal) 1" dia. Straight Shank Tension/Compression Tap Chuck

Erickson Tool (Kennametal) 1" dia. Straight Shank Tension/Compression Tap Chuck

  • Ramona, California, United States
  • Jan 30th
Bull Grip #50 Taper Collet Head New in Case 2-Collets

Bull Grip #50 Taper Collet Head New in Case 2-Collets

  • Westerlo, New York, United States
  • Jan 30th
12 Pcs ER-20 Set, Size from 1/16" to 1/2" in Fitted Strong Alum Box, #0223-0799

12 Pcs ER-20 Set, Size from 1/16" to 1/2" in Fitted Strong Alum Box, #0223-0799

  • Richmond Hill, Ontario, Canada
  • Jan 30th
ACURA MILL 3/4" COLLET 9300017 #7261

ACURA MILL 3/4" COLLET 9300017 #7261

  • Resaca, Georgia, United States
  • Jan 30th
CNC Milling Machine Spindle HOLDER CHUCK MILL LATHE ER11 COLLET ONE SET 13 pcs

CNC Milling Machine Spindle HOLDER CHUCK MILL LATHE ER11 COLLET ONE SET 13 pcs

  • default, default, Hong Kong
  • Jan 30th
Aluminum Offset Angle 3/4” x 1-1/2” x 48 in, 1/16 in thick, .75 IN x 1.5 IN, NEW

Aluminum Offset Angle 3/4” x 1-1/2” x 48 in, 1/16 in thick, .75 IN x 1.5 IN, NEW

  • Old Fort, North Carolina, United States
  • Jan 30th
Aluminum Angle 3/4 x 3/4 x 24 in, 1/16 in thick, New, USA!

Aluminum Angle 3/4 x 3/4 x 24 in, 1/16 in thick, New, USA!

  • Old Fort, North Carolina, United States
  • Jan 30th
T-SLOTTED ANGLE PLATES 30 IN X 36 IN FACE MILL MILLING MACHINE CNC BORING

T-SLOTTED ANGLE PLATES 30 IN X 36 IN FACE MILL MILLING MACHINE CNC BORING

  • Essington, Pennsylvania, United States
  • Jan 30th
STL QD-H1X1-7/16 Taper Bushing, TL-H1X1-7/16" Bore KW - NEW

STL QD-H1X1-7/16 Taper Bushing, TL-H1X1-7/16" Bore KW - NEW

  • Bay City, Michigan, United States
  • Jan 30th
Roller Conveyor 13" w x 60" l x 40" h, 1 1/2" dia Rollers 7 pc

Roller Conveyor 13" w x 60" l x 40" h, 1 1/2" dia Rollers 7 pc

  • Lake Saint Louis, Missouri, United States
  • Jan 30th
Dividing Head Index Plate (Inv.29517) Your choice of ONE

Dividing Head Index Plate (Inv.29517) Your choice of ONE

  • Portland, Connecticut, United States
  • Jan 30th
Lapointe 26 in. Hydraulic Index Table (Inv.16850)

Lapointe 26 in. Hydraulic Index Table (Inv.16850)

  • Portland, Connecticut, United States
  • Jan 30th
ACER HV-10 10" Horizontal/Vertical Rotary Table

ACER HV-10 10" Horizontal/Vertical Rotary Table

  • Fullerton, California, United States
  • Jan 30th
Cushman 8" 4 Jaw Chuck for Southbend (Inv.16947)

Cushman 8" 4 Jaw Chuck for Southbend (Inv.16947)

  • Portland, Connecticut, United States
  • Jan 30th
Precision Boring Head 1" Hole 4" Head Dia Brand New

Precision Boring Head 1" Hole 4" Head Dia Brand New

  • San Gabriel, California, United States
  • Jan 30th
Precision Boring Head Shank R8 1-1/2"-18 Thread

Precision Boring Head Shank R8 1-1/2"-18 Thread

  • San Gabriel, California, United States
  • Jan 30th
LARGE 2 Part Milling Vise - see pictures - Nice Clean Heavy Duty

LARGE 2 Part Milling Vise - see pictures - Nice Clean Heavy Duty

  • Jackson, Mississippi, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies