US $3700
| Condition: |
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully
operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
...
|
Brand | Hardinge |
| MPN | No. 22 | ||
| Model | No. 22 | ||
| Country/Region of Manufacture | United States |
Directions
Similar products from Screw Machines Equipment
FUSION MS-SRX400 Screw Covers [S00-01196-00]
Detterbeck Box Tool Roll Holder 00R651
Brown & Sharp 3/8" tool holder
NAMCO THREAD ROLLING HEAD + CHASERS - 3/4" SHANK - N-1 - (1/4" to 7/16")
New 1.0-5.0 Screw Arrangement machine Automatic Screw Feeder Conveyor FA-580
New FA-580 Automatic Screw Feeder Conveyor 1.0-5.0 Screw Arrangement machine
FA-580 Automatic Screw Feeder Conveyor 1.0-5.0 Screw Arrangement machine New
Automatic Screw Feeder Conveyor 1.0-5.0 Screw Arrangement machine FA-580 New
220V Screw Type Powder Automatic Feeding Loading Machine Upload Transit 1Kw
Lot Of 33 Hardinge & B&S No. 22 Collets
Peterson - M162SA - (Price per 1)
(5) REGROUND SETS OF GEOMETRIC CHASERS FOR 9/16 D OR DS DIE HEAD.
Tolomatic 2750-0045 GSWA ServoWeld Actuator Roller Screw - Used
ESCO Escomatic Rotomatic DS-2 Swiss Automatic Screw Machine
Geometric 9/16 Thread Cutting Die Head Chasers 1/4" - 36 TICN
Geometric 1" KD Thread Cutting Die Head Chaser Sets WITH BOTTOM PIN 7 sets
Geometric Thread Cutting Die Head Chasers with Bottom Pin 4 sets 7/16-20x
Geometric 1K Thread Cutting Die Head Chaser Sets WITH BOTTOM PIN 7/16-20 1/4NPT
1 3/4 GEOMETRIC DIE THREADING DIE HEAD 1.5" SHANK
People who viewed this item also vieved
LYNDEX BILZ TYPE 1 TAP ADAPTER #12 TAP NT05-012
Makita 10-Piece Tap & Drill Set 711464-A-A NIP
20" Swg 1.5HP Spdl Rockwell 70-330 Model 20 DRILL PRESS, VARI SPEED, #3MT, T-SLO
NEW ROSEMOUNT 01151-0211-0002 FITTING ADAPTOR FOR PRESSURE TRANSMITTER
2004482260 Charmilles Roller for Charmilles edm wire cut machine
Charmilles 206204390 Rethreading module, Charmilles 206.204.390, 206-204-390
NEW SCOTCHMAN MODEL 5014-TM 50 TON IRONWORKER, MADE IN USA
NEW 150 TON DELUXE H-FRAME INDUSTRIAL HYDRAULIC PRESS
2006 37" TIMESAVER "3100 SERIES" BELT GRINDER/BRUSH WET FINISHING MACHINE
1995 SUNNEN MODEL: MBC-1803 HONE WITH AUTO CYCLE & POWER STROKING -FACTORY PAINT
2012 TIMESAVER Model: 1111-11-0, 9" WET BELT GRINDER, w/PAPER FILTER, WET TRACKG
14" Swg 40" cc Brown & Sharpe 1440U OD GRINDER, HYD. Tbl, AUTO INFEED, DOUBLE SW
1.5" Dia. Giddings & Lewis WINSLOMATIC DRILL GRINDER, large tooling package, air
9.8" Swg 18" cc Kondo Hi-Gloss-450-H-TS OD GRINDER, I.D., HYD TBL, AUTO INFEED,
MICRO 100 QUICK CHANGE TOOL HOLDER QTH-410L ( 1.000" OD SHANK ) ( 0.500" ID )
TNMG 432 INDEXABLE CARBIDE INSERT 1 1/4" LATHE TURNING engine metal TOOL HOLDER
ALBRECHT 3/8" ( 10mm ) KEYLESS DRILL CHUCK W/ J33 JACOBS TAPER
ALBRECHT 3/8" ( 10mm ) KEYLESS DRILL CHUCK W/ 1/2" STRAIGHT SHANK
large tapping head with 1 collet @ 3/8".usa
36" Thrt SCIAKY 90 KVA SPOT WELDER Unitrol Solution Micro Processor
14" OGP TOP BENCH CONTOUR PROJECTOR OPTICAL COMPARATOR w/DRO & EDGE DETECTION
125HP Kaeser CSD-125 AIR COMPRESSOR, 125 PSI, 581 CFM, Air Cooled, 460 Volt, 3
DoAll Band Saw Wheel C80 Horizontal Bandsaw Machine Shop Tool New List $800
STARRETT 1-1/8 HOLE SAW 29mm VH0118 EDP55087 Bearcat
John Deere 670 Mid Pto Kit AM107213 Compact Utility Tractor M95889
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies