+ Post new Ad
LOT OF 38 REIFF & NESTOR R & N PIPE THREAD TAPS 6/32" - 5/8" MACHINIST GRAB BAG, US $81 – Picture 0
LOT OF 38 REIFF & NESTOR R & N PIPE THREAD TAPS 6/32" - 5/8" MACHINIST GRAB BAG, US $81 – Picture 0

Lot Of 38 Reiff & Nestor R & N Pipe Thread Taps 6/32" - 5/8" Machinist Grab Bag

US $81

  • Springville, New York, United States
  • May 24th
Open on mobile:
QR code
 LOT OF 38 REIFF & NESTOR R & N PIPE THREAD TAPS 6/32" - 5/8" MACHINIST GRAB BAG THESE ALL CAME FROM THE ESTATE OF A LOCAL MACHINIST. MOST ARE IN VERY GOOD CONDITION WITH SOME LIGHT WEAR, A FEW HAVE SOME LIGHT SURFACE RUST MAINLY ON THE SHAFTS. I'M NOT AN EXPERT, SO ASK ANY QUESTIONS? BEFORE BIDDING?      EVERYONE LOVES SURPRISES, BUT THAT'S ONE THING YOU WILL NEVER GET WHEN YOU BUY ANYTHING FROM US! WE TRY TO POINT OUT ANY FLAWS IN EVERYTHING WE SELL! ASK ANY QUESTIONS BEFORE BIDDING!                                                                                                                                                                    PAYMENT WITHIN 3 DAYS OF AUCTIONS END, IMMEDIATELY WITH "BUY IT NOW".      PAYPAL ONLY,  PLEASE!  WE WILL GLADLY ACCEPT RETURNS ON ANY ITEM THAT IS NOT AS DESCRIBED AND AS LONG AS IT IS IN THE SAME CONDITION/ IS THE SAME ITEM THAT WE SENT OUT,  WITH NOTICE FROM THE BUYER WITHIN 5 DAYS AFTER RECEIPT OF ITEM. THE BUYER PAYS THE RETURN POSTAGE.  PLEASE LOOK AT ALL THE PHOTOS AND READ THE DESCRIPTION CAREFULLY.  AS YOU CAN SEE BY OUR FEEDBACK,  WE ALWAYS AIM TO HAVE A SATISFIED CUSTOMER.  THANKS FOR LOOKING AND GOOD LUCK BIDDING!

Directions

Similar products from Taper Pipe Taps

3/8 In. Pipe Tap NPT Made By R&N

3/8 In. Pipe Tap NPT Made By R&N

  • Manchester Township, New Jersey, United States
  • May 24th
(1) Kennametal- 3/8-18 Inch NPT Thread, 2-1/2 to 3-1/2 Chamfer Standard Pipe Tap

(1) Kennametal- 3/8-18 Inch NPT Thread, 2-1/2 to 3-1/2 Chamfer Standard Pipe Tap

  • Boynton Beach, Florida, United States
  • May 24th
(1) Emuge Spiral Flute Pipe Tap Thread Size (Inch): 1/2-14 Thread

(1) Emuge Spiral Flute Pipe Tap Thread Size (Inch): 1/2-14 Thread

  • Boynton Beach, Florida, United States
  • May 24th
(1) WIDIA Pipe Tap, Right Hand, Taper, 1/16", 27 Pitch, High Speed Steel

(1) WIDIA Pipe Tap, Right Hand, Taper, 1/16", 27 Pitch, High Speed Steel

  • Boynton Beach, Florida, United States
  • May 24th
5pc NPT Pipe Tap Set (4)1/8" &(1) 1/4" Ace, Morse and Others

5pc NPT Pipe Tap Set (4)1/8" &(1) 1/4" Ace, Morse and Others

  • Edison, New Jersey, United States
  • May 24th
High Quality 1-1/2" WELLS Carbon Steel Taper Pipe Tap Thread Cutting Cleaning

High Quality 1-1/2" WELLS Carbon Steel Taper Pipe Tap Thread Cutting Cleaning

  • Mount Morris, Illinois, United States
  • May 24th
1/2-14 NPT TAP

1/2-14 NPT TAP

  • Wichita, Kansas, United States
  • May 24th
(2) NEW GTD 1/4" - 18 NPSF STRAIGHT PIPE TAPS HSS

(2) NEW GTD 1/4" - 18 NPSF STRAIGHT PIPE TAPS HSS

  • Goodview, Virginia, United States
  • May 24th
12 N.C. 24 HS Flutes Hand Tap Set Bottom Plug Taper USA new

12 N.C. 24 HS Flutes Hand Tap Set Bottom Plug Taper USA new

  • Bristol, Tennessee, United States
  • May 24th
*** NEW Set Of 5 PIPE TAP OSG BRAND 3/4-14 NPT 5 FLUTE PART# 13106-00 ***

*** NEW Set Of 5 PIPE TAP OSG BRAND 3/4-14 NPT 5 FLUTE PART# 13106-00 ***

  • Torrance, California, United States
  • May 24th
GTD 1 Inch Pipe Tap GTD 1-11 1/2 NPT HS USA L0906 P

GTD 1 Inch Pipe Tap GTD 1-11 1/2 NPT HS USA L0906 P

  • Sparks, Nevada, United States
  • May 24th
Assorted Lot of 11 Bath Pipe Tap s Threading Tool

Assorted Lot of 11 Bath Pipe Tap s Threading Tool

  • Liverpool, New York, United States
  • May 24th
SPEARS, 8" X 4" PVC PIPE TAP, WITH 437-420, 4" X 2" BUSHING, SADDLE ONLY, 150PSI

SPEARS, 8" X 4" PVC PIPE TAP, WITH 437-420, 4" X 2" BUSHING, SADDLE ONLY, 150PSI

  • Glasgow, Kentucky, United States
  • Jun 29th
3/4"-14 NPT Pipe Tap

3/4"-14 NPT Pipe Tap

  • Chesapeake, Virginia, United States
  • Jun 28th
2 GTD GREENFIELD TAP 1-1/2 - 6 NC GH4 A10 H5 4 FLUTE, 6 3/8" LENGTH

2 GTD GREENFIELD TAP 1-1/2 - 6 NC GH4 A10 H5 4 FLUTE, 6 3/8" LENGTH

  • San Jacinto, California, United States
  • Jun 27th
2 Berkley NPT, pipe taps, 1/2" & 1/4"

2 Berkley NPT, pipe taps, 1/2" & 1/4"

  • Holbrook, New York, United States
  • Jun 27th
GTD GREENFIELD TAP 1-1/4 - 7 NC GH4 A11 HS 4 FLUTE, 5.75" LENGTH

GTD GREENFIELD TAP 1-1/4 - 7 NC GH4 A11 HS 4 FLUTE, 5.75" LENGTH

  • San Jacinto, California, United States
  • Jun 27th
HSS Pipe Tap, 1.1/ 4x11 1/2

HSS Pipe Tap, 1.1/ 4x11 1/2

  • Birmingham, Alabama, United States
  • Jun 26th
1/2-14 NPTF Pipe Tap TIN, OSG 1313005

1/2-14 NPTF Pipe Tap TIN, OSG 1313005

  • Colorado Springs, Colorado, United States
  • Jun 26th
2 pcs Square Head HSS M5 3 Flutes Hand Screw Thread Metric Plug Taps CT

2 pcs Square Head HSS M5 3 Flutes Hand Screw Thread Metric Plug Taps CT

  • Shenzhen, China
  • Jun 25th

People who viewed this item also vieved

VERMONT 1 - 14 4 FLT TAP MACHINIST TAPS TOOLS TOOLING

VERMONT 1 - 14 4 FLT TAP MACHINIST TAPS TOOLS TOOLING

  • Stockton, California, United States
  • Jan 30th
WINTER 1 - 8, 4 FLUTE TAP MACHINIST TOOLING TAPS N TOOLS

WINTER 1 - 8, 4 FLUTE TAP MACHINIST TOOLING TAPS N TOOLS

  • Stockton, California, United States
  • Jan 30th
BENDIX BESLY 7/8 - 20 HSS 6 FLT TAP MACHINIST TAPS TOOLS DIE'S

BENDIX BESLY 7/8 - 20 HSS 6 FLT TAP MACHINIST TAPS TOOLS DIE'S

  • Stockton, California, United States
  • Jan 30th
GREENFIELD 7/8 - 14 HSS TAP MACHINIST TAPS N TOOLS

GREENFIELD 7/8 - 14 HSS TAP MACHINIST TAPS N TOOLS

  • Stockton, California, United States
  • Jan 30th
JARVIS 7/8 - 14 GH2 HSS PLUG TAP MACHINIST TAPS N TOOLS

JARVIS 7/8 - 14 GH2 HSS PLUG TAP MACHINIST TAPS N TOOLS

  • Stockton, California, United States
  • Jan 30th
Virgin Vinyls SUEDE BURGUNDY 49 X 125 YDS 119 LBS RM0874

Virgin Vinyls SUEDE BURGUNDY 49 X 125 YDS 119 LBS RM0874

  • Danville, Virginia, United States
  • Jan 30th
9/16 27 UNS 2A LEFT HAND THREAD RING GAGE GO NO GO .5625 L.H. GAUGE TOOLMAKER

9/16 27 UNS 2A LEFT HAND THREAD RING GAGE GO NO GO .5625 L.H. GAUGE TOOLMAKER

  • Xenia, Ohio, United States
  • Jan 30th
SHARS Surface Roughness Camparator

SHARS Surface Roughness Camparator

  • Saint Charles, Illinois, United States
  • Jan 30th
1/2 12 N 2A THREAD RING GAGE GO ONLY .500 P.D. .4444 TOOLMAKER SHOP GAUGE

1/2 12 N 2A THREAD RING GAGE GO ONLY .500 P.D. .4444 TOOLMAKER SHOP GAUGE

  • Xenia, Ohio, United States
  • Jan 30th
1 1/2 6 NC 2 THREAD RING GAGE GO NO GO 1.500 P.D.'S = 1.3917 & 1.3816 TOOLING

1 1/2 6 NC 2 THREAD RING GAGE GO NO GO 1.500 P.D.'S = 1.3917 & 1.3816 TOOLING

  • Xenia, Ohio, United States
  • Jan 30th
VINTAGE BUTTERFIELD 3/4 NPT-14 DERBY LINE HS8 FORGED STEEL TAP

VINTAGE BUTTERFIELD 3/4 NPT-14 DERBY LINE HS8 FORGED STEEL TAP

  • Warsaw, New York, United States
  • Jan 30th
VINTAGE WINTER 3/4-10 NC HS1 STAINLESS STEEL TAP

VINTAGE WINTER 3/4-10 NC HS1 STAINLESS STEEL TAP

  • Warsaw, New York, United States
  • Jan 30th
Starrett 91B Tap Wrench 3/16" - 1/2" Tap Size 5/32" - 9/32" Square Shank Diame

Starrett 91B Tap Wrench 3/16" - 1/2" Tap Size 5/32" - 9/32" Square Shank Diame

  • United States
  • Jan 30th
EMUGE SPIRAL TAP M4 ISO 2/6H 1 ENORM HSSE GERMANY (QTY.1) #1330

EMUGE SPIRAL TAP M4 ISO 2/6H 1 ENORM HSSE GERMANY (QTY.1) #1330

  • Resaca, Georgia, United States
  • Jan 30th
Machinists 1/1 Buy Now M7x 1.0 Super Rare Thread Repair Kit with inserts

Machinists 1/1 Buy Now M7x 1.0 Super Rare Thread Repair Kit with inserts

  • Lutz, Florida, United States
  • Jan 30th
1 PIECE M6 X 1.0 D5 3 FLUTE SPIRAL FLUTE TICN CNC TAP GREENFIELD

1 PIECE M6 X 1.0 D5 3 FLUTE SPIRAL FLUTE TICN CNC TAP GREENFIELD

  • Mentor, Ohio, United States
  • Feb 13th
1 PIECE 1/4"-20 GH3 2 FLUTE SPIRAL FLUTE BOTTOM GREENFIELD

1 PIECE 1/4"-20 GH3 2 FLUTE SPIRAL FLUTE BOTTOM GREENFIELD

  • Mentor, Ohio, United States
  • Feb 13th
1 PIECE M3.5 X 0.6 D6 ROLL TAP NEW GREENFIELD

1 PIECE M3.5 X 0.6 D6 ROLL TAP NEW GREENFIELD

  • Mentor, Ohio, United States
  • Feb 13th
1 PIECE 12-24 NC GH3 SPIRAL FLUTE CNC TAP GREENFIELD TAP

1 PIECE 12-24 NC GH3 SPIRAL FLUTE CNC TAP GREENFIELD TAP

  • Mentor, Ohio, United States
  • Feb 13th
MORSE CUTTING TOOLS, style 2070 sizes 10-32, 8-32 ground thread TAPS 2 boxes

MORSE CUTTING TOOLS, style 2070 sizes 10-32, 8-32 ground thread TAPS 2 boxes

  • Kearny, New Jersey, United States
  • Feb 13th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies