+ Post new Ad
LOT OF 4 10.5 mm ( 0.4134 ) Diameter DORMER CARBIDE DRILL - COOLANT OIL HOLES, US $57 – Picture 0
LOT OF 4 10.5 mm ( 0.4134 ) Diameter DORMER CARBIDE DRILL - COOLANT OIL HOLES, US $57 – Picture 0

Lot Of 4 10.5 Mm ( 0.4134 ) Diameter Dormer Carbide Drill - Coolant Oil Holes

US $57

  • Michigan, United States
  • Jun 9th
Open on mobile:
QR code
THIS AUCTION IS FOR 4 DRILLS   As shown, 4 unused High Performance 10.5 mm diameter with MP-X Point 140 Degree Point Angle, TiAlN Coated,Regular Spiral,Solid Carbide Through Coolant, Jobber Drills. Shipped in original shipping tubes. Each drill measures 118 mm overall length with 70 mm of flute length. ALL 4 are New with no chips or usage.   Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials. Titanium aluminum nitride (TiAlN) has a higher hardness than TiN and TiCN. It is extremely heat resistant and commonly used for high speed applications on stainless steels, nickel and titanium alloys               Drill Size 10.50 mm        (Decimal Inch) 0.4134           Drill Point Angle 140              Drill Bit Material Solid Carbide      Drill Bit Finish/Coating TiAlN      Flute Type Spiral       Cutting Direction Right Hand      Shank Type Straight                                                Flute Length (mm) 70.00      Overall Length (mm) 118.00      Flute Length x Diameter Ratio 5xD      Point Type MP-X      Shank Diameter (mm) 12.00      Spiral Type Regular Spiral       Shank Length (mm) 45.00      Web Configuration Tapered      Web Thinning Web-Thinned                                         Through Coolant (Yes/No) Yes THIS AUCTION IS FOR 4 DRILLS Shipped by US Postal service for speedy delivery as soon as payment is received.        

Directions

Similar products from Solid Carbide Drill Bits

Vargus Vardex Solid Carbide Thread Mill 5/8"x18 UNF 11/16"-1 11/16"x18 UNEF 3085

Vargus Vardex Solid Carbide Thread Mill 5/8"x18 UNF 11/16"-1 11/16"x18 UNEF 3085

  • Tel Aviv, Israel
  • Jun 9th
50 TYCOM REPOINTED MICRO CARBIDE PCB DRILL BITS SIZE 79 / .0145" ~ 1/8" SHANK

50 TYCOM REPOINTED MICRO CARBIDE PCB DRILL BITS SIZE 79 / .0145" ~ 1/8" SHANK

  • Mechanicsburg, Pennsylvania, United States
  • Jun 9th
SHOP TOOLING, CARBIDE HI-ROCK DRILLS & C-DRILLS , HHS FOR THE REST.

SHOP TOOLING, CARBIDE HI-ROCK DRILLS & C-DRILLS , HHS FOR THE REST.

  • Bloomfield, New Mexico, United States
  • Jun 9th
Accupro 05252267 Carbide Single Point Threading Tool

Accupro 05252267 Carbide Single Point Threading Tool

  • Muncie, Indiana, United States
  • Jun 9th
Precision Dormer 059207 High Speed Steel Aircraft Extension Drill

Precision Dormer 059207 High Speed Steel Aircraft Extension Drill

  • Duncan, South Carolina, United States
  • Jun 9th
T&O 18183 T&O Multi- Flute M42 Cobalt TiN Coated Countersink - Length: 1-1/2'

T&O 18183 T&O Multi- Flute M42 Cobalt TiN Coated Countersink - Length: 1-1/2'

  • Duncan, South Carolina, United States
  • Jun 9th
Sumitomo 15/32" Solid Carbide Coolant Fed Drill 7xD TiALN (MDS4688LHV)

Sumitomo 15/32" Solid Carbide Coolant Fed Drill 7xD TiALN (MDS4688LHV)

  • Round Lake, Illinois, United States
  • Jun 9th
NEW SURPLUS JARVIS SOLID CARBIDE 3/4" CYLINDRICAL BALL NOSE BUR SC-7 BURR SC7

NEW SURPLUS JARVIS SOLID CARBIDE 3/4" CYLINDRICAL BALL NOSE BUR SC-7 BURR SC7

  • Fairfield, Iowa, United States
  • Jun 9th
50 Tycom PCB CNC Drill Bits .017 45mm Series 250 Micro

50 Tycom PCB CNC Drill Bits .017 45mm Series 250 Micro

  • Cedar Rapids, Iowa, United States
  • Jun 9th
HOUGEN Annular Cutters Tool Material HSS Size 1-5/16" 2" depth of cut

HOUGEN Annular Cutters Tool Material HSS Size 1-5/16" 2" depth of cut

  • Flushing, New York, United States
  • Jun 9th
MA Ford #2 (.221") Solid Carbide Straight Flute Drill Bit, 20022100

MA Ford #2 (.221") Solid Carbide Straight Flute Drill Bit, 20022100

  • Abingdon, Maryland, United States
  • Jun 9th
SOCK-IT-OUT MEB-2 METRIC EXTRACTOR SET

SOCK-IT-OUT MEB-2 METRIC EXTRACTOR SET

  • Duncan, South Carolina, United States
  • Jun 9th
Chicago-Latrobe #78683 (#44) x 0.086" x 1/2" x 2" Carbide Spiral Stub Drills

Chicago-Latrobe #78683 (#44) x 0.086" x 1/2" x 2" Carbide Spiral Stub Drills

  • Venice, Florida, United States
  • Jun 9th
SPHINX Spirec Cobalt Micro Twist Drills #63 118° 20° Norm Pt [pak 10]

SPHINX Spirec Cobalt Micro Twist Drills #63 118° 20° Norm Pt [pak 10]

  • Flushing, New York, United States
  • Jun 9th
Everede IND-16-9-125 Indexable Countersink - Diameter: 3/8', Point Angle: 90

Everede IND-16-9-125 Indexable Countersink - Diameter: 3/8', Point Angle: 90

  • Duncan, South Carolina, United States
  • Jun 9th
Lot 5pcs IRWIN joran Drills 8mm Dia 120mm Length Carbide Tipped 8x120mm Drill

Lot 5pcs IRWIN joran Drills 8mm Dia 120mm Length Carbide Tipped 8x120mm Drill

  • CN, China
  • Jun 9th
Sumitomo Drill Carbide TIN Coated 1719SP W40011787 021

Sumitomo Drill Carbide TIN Coated 1719SP W40011787 021

  • Meadville, Pennsylvania, United States
  • Jun 9th
4 TITAN "TUFF KARB" TC19510 5/32" Str Flute Carbide Drill

4 TITAN "TUFF KARB" TC19510 5/32" Str Flute Carbide Drill

  • Joplin, Missouri, United States
  • Jun 9th
Keo 32342 High Speed Steel NC Spotting Drill

Keo 32342 High Speed Steel NC Spotting Drill

  • Duncan, South Carolina, United States
  • Jun 9th
MA FORD Solid Carbide Screw Machine Twist Drill 118° 10% Co 2" Norm 30 [pak 3]

MA FORD Solid Carbide Screw Machine Twist Drill 118° 10% Co 2" Norm 30 [pak 3]

  • Flushing, New York, United States
  • Jun 9th

People who viewed this item also vieved

NEW SURPLUS STARCUT CARBIDE TIP STEP GUN DRILL .942"+/- X 1.125"+/- 1250823R

NEW SURPLUS STARCUT CARBIDE TIP STEP GUN DRILL .942"+/- X 1.125"+/- 1250823R

  • Fairfield, Iowa, United States
  • Jan 30th
Sumitomo 083MHV MDS083MHV Carbide Coolant Drill Bit 8.3mm

Sumitomo 083MHV MDS083MHV Carbide Coolant Drill Bit 8.3mm

  • Middlebury, Indiana, United States
  • Jan 30th
Sumitomo 2656MHV MDS2656MHV Carbide Coolant Drill Bit .2656"

Sumitomo 2656MHV MDS2656MHV Carbide Coolant Drill Bit .2656"

  • Middlebury, Indiana, United States
  • Jan 30th
New old stock 15/32 Taper Length HSS Drill Bit Champion Made in USA Bits (D-1)

New old stock 15/32 Taper Length HSS Drill Bit Champion Made in USA Bits (D-1)

  • Brooklyn, New York, United States
  • Jan 30th
#2 Morse Taper Shank Drill Bit HS 17mm x 18” OAL Lathe Mill Machining

#2 Morse Taper Shank Drill Bit HS 17mm x 18” OAL Lathe Mill Machining

  • Washington, Michigan, United States
  • Jan 30th
HS #2 Morse Taper Shank Drill Bit 39/64” x 18” OAL Lathe Mill Machining

HS #2 Morse Taper Shank Drill Bit 39/64” x 18” OAL Lathe Mill Machining

  • Washington, Michigan, United States
  • Jan 30th
Cleveland Twist Drill 39/64 Jobber Length Drill Bit

Cleveland Twist Drill 39/64 Jobber Length Drill Bit

  • Drums, Pennsylvania, United States
  • Jan 30th
Usa Drill Bit Lot 16 Pcs

Usa Drill Bit Lot 16 Pcs

  • LaGrange, Georgia, United States
  • Jan 30th
Precision Drill Bits 2.10 Type 2A Metric Stock #16021 Total 120 bits

Precision Drill Bits 2.10 Type 2A Metric Stock #16021 Total 120 bits

  • Jasper, Indiana, United States
  • Jan 30th
NEW PUTNAM COUNTER BORE PILOT DRILL size 15/32 x 11/16 #2 MORSE TAPER 91792

NEW PUTNAM COUNTER BORE PILOT DRILL size 15/32 x 11/16 #2 MORSE TAPER 91792

  • Thomaston, Connecticut, United States
  • Jan 30th
NEW PUTNAM COUNTER BORE PILOT DRILL size .343 x .468 x .500 EDP 91710

NEW PUTNAM COUNTER BORE PILOT DRILL size .343 x .468 x .500 EDP 91710

  • Thomaston, Connecticut, United States
  • Jan 30th
NEW PUTNAM COUNTER BORE PILOT DRILL size 7/16 x 5/8 x 1/2 EDP 91715

NEW PUTNAM COUNTER BORE PILOT DRILL size 7/16 x 5/8 x 1/2 EDP 91715

  • Thomaston, Connecticut, United States
  • Jan 30th
10 - GUHRING 00653-0.800mm 0.8mm HSS Stub Machine Length TiN Coated Twist Drills

10 - GUHRING 00653-0.800mm 0.8mm HSS Stub Machine Length TiN Coated Twist Drills

  • Champlain, New York, United States
  • Jan 30th
10 new GUHRING 00653-1.610mm #52 HSS Stub Machine Length TiN Coated Twist Drills

10 new GUHRING 00653-1.610mm #52 HSS Stub Machine Length TiN Coated Twist Drills

  • Champlain, New York, United States
  • Jan 30th
Jobber Length Drills 17/64" HSS TiN 118D 2-7/8" LOC x 4-1/8" OAL QTY 12 <064>

Jobber Length Drills 17/64" HSS TiN 118D 2-7/8" LOC x 4-1/8" OAL QTY 12 <064>

  • Saint Louis, Missouri, United States
  • Jan 30th
1-1/8&#034; DIAMETER 3 MORSE TAPER DRILL BIT + 4 MT SLEEVE ADAPTER USA

1-1/8" DIAMETER 3 MORSE TAPER DRILL BIT + 4 MT SLEEVE ADAPTER USA

  • South El Monte, California, United States
  • Jan 30th
SHARP! HERCULES 51/64&#034; MORSE TAPER DRILL BIT USA

SHARP! HERCULES 51/64" MORSE TAPER DRILL BIT USA

  • South El Monte, California, United States
  • Jan 30th
LOT OF 5 DRILL BITS 3 MORSE TAPER 45/64&#034; TO 15/16&#034; SIZE RANGE

LOT OF 5 DRILL BITS 3 MORSE TAPER 45/64" TO 15/16" SIZE RANGE

  • La Puente, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies