+ Post new Ad
Lot of 8 Counter Sink Debur Machinist Gunsmith for Milling/Lathe Weldon-Morse..., US $44.99 – Picture 0
Lot of 8 Counter Sink Debur Machinist Gunsmith for Milling/Lathe Weldon-Morse..., US $44.99 – Picture 1
Lot of 8 Counter Sink Debur Machinist Gunsmith for Milling/Lathe Weldon-Morse..., US $44.99 – Picture 2
Lot of 8 Counter Sink Debur Machinist Gunsmith for Milling/Lathe Weldon-Morse..., US $44.99 – Picture 3
Lot of 8 Counter Sink Debur Machinist Gunsmith for Milling/Lathe Weldon-Morse..., US $44.99 – Picture 4
Lot of 8 Counter Sink Debur Machinist Gunsmith for Milling/Lathe Weldon-Morse..., US $44.99 – Picture 5
Lot of 8 Counter Sink Debur Machinist Gunsmith for Milling/Lathe Weldon-Morse..., US $44.99 – Picture 6
Lot of 8 Counter Sink Debur Machinist Gunsmith for Milling/Lathe Weldon-Morse..., US $44.99 – Picture 7
Lot of 8 Counter Sink Debur Machinist Gunsmith for Milling/Lathe Weldon-Morse..., US $44.99 – Picture 8
Lot of 8 Counter Sink Debur Machinist Gunsmith for Milling/Lathe Weldon-Morse..., US $44.99 – Picture 9
Lot of 8 Counter Sink Debur Machinist Gunsmith for Milling/Lathe Weldon-Morse..., US $44.99 – Picture 0
Lot of 8 Counter Sink Debur Machinist Gunsmith for Milling/Lathe Weldon-Morse..., US $44.99 – Picture 1
Lot of 8 Counter Sink Debur Machinist Gunsmith for Milling/Lathe Weldon-Morse..., US $44.99 – Picture 2
Lot of 8 Counter Sink Debur Machinist Gunsmith for Milling/Lathe Weldon-Morse..., US $44.99 – Picture 3
Lot of 8 Counter Sink Debur Machinist Gunsmith for Milling/Lathe Weldon-Morse..., US $44.99 – Picture 4
Lot of 8 Counter Sink Debur Machinist Gunsmith for Milling/Lathe Weldon-Morse..., US $44.99 – Picture 5
Lot of 8 Counter Sink Debur Machinist Gunsmith for Milling/Lathe Weldon-Morse..., US $44.99 – Picture 6
Lot of 8 Counter Sink Debur Machinist Gunsmith for Milling/Lathe Weldon-Morse..., US $44.99 – Picture 7
Lot of 8 Counter Sink Debur Machinist Gunsmith for Milling/Lathe Weldon-Morse..., US $44.99 – Picture 8
Lot of 8 Counter Sink Debur Machinist Gunsmith for Milling/Lathe Weldon-Morse..., US $44.99 – Picture 9

Lot Of 8 Counter Sink Debur Machinist Gunsmith For Milling/lathe Weldon-morse...

US $44.99

  • Hillside, New Jersey, United States
  • Feb 12th
Open on mobile:
QR code
                                                                         This Listing is for ONE(1)    Lot of 8 Counter Sink Debur Machinist Gunsmith for Machinist Gunsmith for Milling Machine/Lathe           Morse 3/4"-110°, Hanita 1/2"-60°, Dolfanex 1/2"x 1/4"-82°, Cleveland 5/8"-60°, Weldon HS 82° Piloted 1/4"Countersink, Weldon CS-35 82°, Weldon 1/16''o 15/16" #0 82°.                                                                                                                                                                                                                                                          Good Used Condition.                                Please take a look at all pictures. What you see in the pictures is what you will receive. CHECK MY OTHER LISTING FOR MORE POWER TOOLS AND MACHINIST PARTS!! Terms I am not a expert in the metalworking/milling/machining industry, but I do my best to describe the item I'm selling and the condition that it's in. Parts are listed with part numbers when available- please do your research before bidding. If you feel there is an error or item is not as described, contact Me for assistance prior to opening a case. I will help you as best as I can.  Before you leave a neutral or negative feedback, please contact me let me know what can I can do to assist you further.                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Shipping I will combine shipping costs on multiple purchases. Please wait for me to send you a revised invoice prior to payment. Items are shipped through Fedex (Ground) or USPS Priority or First Class only.   Payment  I accept payment by PayPal. If you cannot pay with Paypal, please contact Me for further assistance. All payments should be made by 48 hours of the end of the auction. If you need more time please contact Me. A non-payment case will be opened through ebay otherwise. Thank You.
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
End Type Single End

Directions

Similar products from End Mills Router & Drill Bits

END MILL

END MILL

  • Millbury, Ohio, United States
  • Feb 13th
HSS Straight Shank Spiral 4 Flutes End Mill Cutter 1/4x1/4x3/4x21/2

HSS Straight Shank Spiral 4 Flutes End Mill Cutter 1/4x1/4x3/4x21/2

  • Hong Kong, Hong Kong
  • Feb 12th
12mm Cutting Dia 3mm Slot 6 Flute HSSAL T-Slot End Mill Milling Cutter

12mm Cutting Dia 3mm Slot 6 Flute HSSAL T-Slot End Mill Milling Cutter

  • Hong Kong, Hong Kong
  • Feb 12th
1/4 carbide end mill 4 flutes with .020 radius tialn coated

1/4 carbide end mill 4 flutes with .020 radius tialn coated

  • United States
  • Feb 12th
interstate 3/4 diameter roughing end mill 3 inch flute 5 inch over all length

interstate 3/4 diameter roughing end mill 3 inch flute 5 inch over all length

  • Oxford, New Jersey, United States
  • Feb 12th
1/2 diameter tin coated 3 flute end mill 1 inch cut 3 inch over all length

1/2 diameter tin coated 3 flute end mill 1 inch cut 3 inch over all length

  • Oxford, New Jersey, United States
  • Feb 12th
interstate 1/2 diameter roughing end mill 2 inch of flute 4 inch over all length

interstate 1/2 diameter roughing end mill 2 inch of flute 4 inch over all length

  • Oxford, New Jersey, United States
  • Feb 12th
(Lot of 16) M42 6 Flute End Mills 1 1/4" - 1 1/2" - VG Condition

(Lot of 16) M42 6 Flute End Mills 1 1/4" - 1 1/2" - VG Condition

  • Mount Pleasant, South Carolina, United States
  • Feb 12th
Hanita 1207 M-42 1-1/2" 6 Flute Coated End Mill

Hanita 1207 M-42 1-1/2" 6 Flute Coated End Mill

  • Springwater, New York, United States
  • Feb 12th
USED UGDE1000J5BRC KENNAMETAL 1x5x7.5 SOLID CARBIDE ENDMILL , FREE SHIPPING!!!

USED UGDE1000J5BRC KENNAMETAL 1x5x7.5 SOLID CARBIDE ENDMILL , FREE SHIPPING!!!

  • Salt Lake City, Utah, United States
  • Feb 12th
kennametal carbide endmill 3/8" 4fl coated

kennametal carbide endmill 3/8" 4fl coated

  • Coamo, Puerto Rico, United States
  • Feb 12th
1/2" Carbide Ball endmill R1/4" | TiAin Coated | 2 Flute

1/2" Carbide Ball endmill R1/4" | TiAin Coated | 2 Flute

  • Waterloo, Ontario, Canada
  • Feb 12th
3/8 Carbide Endmill for Aluminum | 3 flute Center Cutting Micrograin

3/8 Carbide Endmill for Aluminum | 3 flute Center Cutting Micrograin

  • Waterloo, Ontario, Canada
  • Feb 12th
Iscar 1-1/2" Diameter 4-Flute Face/Shoulder Mill

Iscar 1-1/2" Diameter 4-Flute Face/Shoulder Mill

  • Houston, Texas, United States
  • Feb 12th
6MM (R3) X 50MM 2-FLUTE HRC40 CUTTING SOLID CARBIDE BALL ENDMILL -10x

6MM (R3) X 50MM 2-FLUTE HRC40 CUTTING SOLID CARBIDE BALL ENDMILL -10x

  • --, Hong Kong
  • Feb 12th
NEW PUTNAM END MILL 1" x 1" x 2" SE 4 FLUTE EDP 94071

NEW PUTNAM END MILL 1" x 1" x 2" SE 4 FLUTE EDP 94071

  • Tempe, Arizona, United States
  • Feb 12th
3PCS Shank HSS End Milling Cutter Cutting Tool with 4-Flute 2mm/3mm/4mm x 6mm

3PCS Shank HSS End Milling Cutter Cutting Tool with 4-Flute 2mm/3mm/4mm x 6mm

  • Shenzhen, China
  • Feb 12th
Enco - Set of End Mills

Enco - Set of End Mills

  • Houston, Texas, United States
  • Feb 12th
2MM X 50MM 2-FLUTE HRC45 CENTER CUTTING AlTiN/TiAIN CARBIDE FLAT ENDMILL 5x

2MM X 50MM 2-FLUTE HRC45 CENTER CUTTING AlTiN/TiAIN CARBIDE FLAT ENDMILL 5x

  • --, Hong Kong
  • Feb 12th
1MM X 50MM 2-FLUTE HRC45 CENTER CUTTING AlTiN/TiAIN CARBIDE FLAT ENDMILL 5x

1MM X 50MM 2-FLUTE HRC45 CENTER CUTTING AlTiN/TiAIN CARBIDE FLAT ENDMILL 5x

  • --, Hong Kong
  • Feb 12th

People who viewed this item also vieved

DUMORE BUSHING SET 2'-3" D & E W/ CASE

DUMORE BUSHING SET 2'-3" D & E W/ CASE

  • Ellington, New York, United States
  • Jan 30th
DUMORE 40 1/2 BROACH SET E STYLE 3/4" W BUSHINGS & CASE 1/16" INCREMENTS

DUMORE 40 1/2 BROACH SET E STYLE 3/4" W BUSHINGS & CASE 1/16" INCREMENTS

  • Ellington, New York, United States
  • Jan 30th
INSERT DNGA 431 ( DNGA150404 ) GRADE KC9010 KENNAMETAL ***10 PCS*** BRAND NEW

INSERT DNGA 431 ( DNGA150404 ) GRADE KC9010 KENNAMETAL ***10 PCS*** BRAND NEW

  • Clayton, Indiana, United States
  • Jan 30th
MACHINIST TOOLS LATHE MILL Large Lot of Machinist Carbide Insert Cutter s

MACHINIST TOOLS LATHE MILL Large Lot of Machinist Carbide Insert Cutter s

  • Morris Plains, New Jersey, United States
  • Jan 30th
BRAND NEW Kennametal SNG 653T K090 Ceramic Inserts 511SO

BRAND NEW Kennametal SNG 653T K090 Ceramic Inserts 511SO

  • Montville, Ohio, United States
  • Jan 30th
BRAND NEW Valenite TNG 432 V34 Ceramic Inserts 490SO

BRAND NEW Valenite TNG 432 V34 Ceramic Inserts 490SO

  • Montville, Ohio, United States
  • Jan 30th
GKI INDEXABLE INSERT LATHE TOOL HOLDER SDJCL-123B

GKI INDEXABLE INSERT LATHE TOOL HOLDER SDJCL-123B

  • Grand Rapids, Michigan, United States
  • Jan 30th
PRATT & WHITNEY P&W MACHINISTS TAP 1/4-20 NC G H3 V-2 HS-34 4 FLUTE

PRATT & WHITNEY P&W MACHINISTS TAP 1/4-20 NC G H3 V-2 HS-34 4 FLUTE

  • Sylvan Beach, New York, United States
  • Jan 30th
Greenlee 5006972 Die For 3/4" Conduit Knockout 3/4" KO

Greenlee 5006972 Die For 3/4" Conduit Knockout 3/4" KO

  • Fergus Falls, Minnesota, United States
  • Jan 30th
New Lot Of (2) 5/8"-11 x 1-1/2" Round Adjustable HSS Die

New Lot Of (2) 5/8"-11 x 1-1/2" Round Adjustable HSS Die

  • Kyle, Texas, United States
  • Jan 30th
Standard Tool Co. Straigh Flute Shell Reamer High Speed 1 1/8" #615

Standard Tool Co. Straigh Flute Shell Reamer High Speed 1 1/8" #615

  • Harrisburg, Pennsylvania, United States
  • Jan 30th
Lot of 2 Used Evans expansion reamers 1.030-1.085 (13.25") & .790-.840 (12.75")

Lot of 2 Used Evans expansion reamers 1.030-1.085 (13.25") & .790-.840 (12.75")

  • Noblesville, Indiana, United States
  • Jan 30th
Wegoma Dual Miter Saw 16" No. SD16S Dbl Head Adj Cutting Length to 10" (23189)

Wegoma Dual Miter Saw 16" No. SD16S Dbl Head Adj Cutting Length to 10" (23189)

  • Cincinnati, Ohio, United States
  • Jan 30th
31" Kaltenbach Cold Saw For Structural Steel No. HDB-800, 9.8" Rounds (24583)

31" Kaltenbach Cold Saw For Structural Steel No. HDB-800, 9.8" Rounds (24583)

  • Cincinnati, Ohio, United States
  • Jan 30th
FOREST CITY BIT

FOREST CITY BIT

  • Sterling Heights, Michigan, United States
  • Jan 30th
Lathe 7/8 Square cutting tool bit Firth-Sterling Super MO-Chip Lot of 3

Lathe 7/8 Square cutting tool bit Firth-Sterling Super MO-Chip Lot of 3

  • Milton Freewater, Oregon, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies