US $62
Condition | Used
:
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
|
Seller Notes | “used” |
Directions
Similar products from Clips & Jaws
De-Sta-Co Model 215-U Workholding Clamp - 4" Overall Height with Handle Up
Lot of 2 Knu-Vise Welding Clamps P-1200
De-Sta-Co Model 225-U Workholding Clamp - 4-1/4" Overall Height with Handle Up
De-Sta-Co Model 225-U Workholding Clamp - 4-1/4" Overall Height w/Handle Up NNB
De-Sta-Co Model 210-U Workholding Clamp - 8" Overall Height with Handle Up - NNB
Lot of (4) Wilton ultra heavy duty clamps
Lot of (5) Wilton $404 5" heavy duty clamps
Lot of (8) heavy duty clamps 5" 4x Armstrong 5404, Federal 104 Williams Hughes
De-Sta-Co Model 215-U Workholding Clamp - NIP
Lot of (4)Enco Sissor clamps 2x #98260 1x #92854 1x unknown
1 - Armstrong 404 C Clamp 4" Opening x 3 1/4" Throat Depth
De-Sta-Co Model 225-U Workholding Clamp - NIP
De-Sta-Co Model 210-U Workholding Clamp - NIP
De-Sta-Co Model 527208 Clamp Pad Bolt with 3/8"-16 Thread - NIP
Lot of 5 DE STA CO model 210U vertical quick release toggle clamps
Starrett 161D Toolmakers Case Hardened Parallel Clamps
2 cant twist clamps and 1 unknown clamp machinist toolmakers tools
BESSEY, 500L, RITE HITE Hold Down Clamps, 8800 Lbs Capacity, Steel Qty. 2,/KT1/
Armstrong 112 C Clamp 13" Throat #37386
Vintage Pair Of Parallel Clamps Tool Maker Made
People who viewed this item also vieved
.394 Hardinge 5c. Collet for Mill or lathe machine. Machinist tools
5/16 Precision 5c.Collet for Mill or lathe machine. Machinist tools
1.0915 Hardinge 5c. Collet for Mill or lathe machine. Machinist tools
72" x 12" x 2.5" Welding Layout Table
30" x 16" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot Weld Jig
DAVENPORT 2:1 CAM LEVER 3RD POSITION
Columbian vise #22 4 1/2 vintage
Flotron Circuit Board Vise Swivel Base Panavise Style vise
MACHINIST ADJUSTABLE TILT ANGLE PALMGREN TYPE VICE & PROTRACTOR
Talide #5 Morse Taper Lathe Dead Center Carbide Tip U.S.A.
Royal 11012 Dead Center Carbide Tipped Point, 2MT. NEW- MADE IN USA FREE SHIP
NORTHFIELD PRECISION 6" POWER CHUCK W/ 3 STEEL JAWS
3 INCH 4-JAW INDEPENDENT PLAIN BACK CHUCK (3900-0413)
4 pc Starrett Parallel Clamps #161-D
Tooling Inspectacles w/Case,HeadStrap &LensCloth,20Times Mag and 2Hp LED's,USA
ERICKSON COLLETS SERIES 100 KENNAMETAL COLLET HOLDER 1" SHANK
Precision 2" Tool maker V block with clamp.
Used Machinist V-Blocks & Clamps
SPi 98-430-2 1/2" - 1-1/2" 9 Matched Pair Steel Wavy Parallel Set w Wood Case 1R
Haas TR210 Trunnion 4th & 5th Axis
Indexing Table; 5 1/2"; T-Slots; Emco-Maier (CTAM 9544)
Yuasa 550-210 10" Tilting Rotary Table
!REDUCED! 3J Collet Nose-ID Threads-62 x 1.5mm for 4NE Hitachi CNC Lathe Collets
30 Pc. Techniks ISO 20 ER 16 CNC Haas Office Mill Kit-Chuck,Collet Set,Pull Stud
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies