+ Post new Ad
Lot Strippit & Exacta Assorted Punch & Die Parts, US $75.00 – Picture 0
Lot Strippit & Exacta Assorted Punch & Die Parts, US $75.00 – Picture 1
Lot Strippit & Exacta Assorted Punch & Die Parts, US $75.00 – Picture 2
Lot Strippit & Exacta Assorted Punch & Die Parts, US $75.00 – Picture 3
Lot Strippit & Exacta Assorted Punch & Die Parts, US $75.00 – Picture 4
Lot Strippit & Exacta Assorted Punch & Die Parts, US $75.00 – Picture 0
Lot Strippit & Exacta Assorted Punch & Die Parts, US $75.00 – Picture 1
Lot Strippit & Exacta Assorted Punch & Die Parts, US $75.00 – Picture 2
Lot Strippit & Exacta Assorted Punch & Die Parts, US $75.00 – Picture 3
Lot Strippit & Exacta Assorted Punch & Die Parts, US $75.00 – Picture 4

Lot Strippit & Exacta Assorted Punch & Die Parts

US $75.00

  • Muscle Shoals, Alabama, United States
  • Jan 30th
Open on mobile:
QR code
You are considering a lot of assorted Strippit and Exacta Punch and Die items.  There is one unused Exacta punch & die set in this lot. The other items are used but appear to be in good condition.  Some of them show some light surface rust.  We have no way of testing these, so they are being sold "as is, untested".  These items came in with a couple of Strippit machines we had that were damaged beyond reasonable repair. The machines were a Strippit Custom 18/30; the other was an older Strippit machine, model unknown.  These punch and die parts may fit other machinery as well.  Please consult with your machines manual or a Strippit dealer to make sure they will fit your machine. You will receive the following: Qty 1, .257 Round Punch & Die Set Qty 1, .2560 X 1.0060 Oblong Punch & Die Set Qty 1, Exacta .594 Punch Only.  Material = .250 Half Hard Copper Qty 1, .555 X .670 Rectangle Punch & Die Set Qty 1, unused in its original box, Exacta .200 X .390 Oblong Punch & Die Set.  Material = .250 Half Hard Copper Qty 1, .256 Round Bottom Die Only Qty 1, .272 Round Bottom Die Only Qty 1, Unknown Top Punch SHIPPING: Buyer to pay actual shipping cost from Muscle Shoals, AL 35661. Or, you are more than welcome to pick the items up here. We will be happy to combine shipping on multiple items. Please contact us for combined shipping quotes. PAYMENT: Paypal If you have any other questions please feel free to contact us. You may do so by using the "ask seller a question" form on this listing. Or, call us at (256) 386-9808, Monday - Friday, 8:00 to 4:30, CST. Thanks for looking and Happy Bidding. Be sure to Check out our other items for more new and used surplus items.

Directions

Similar products from Punch Tool Sets & Dies

Greenlee Tool Co. Rockford IL USA 1 1/16 Diameter AV1763 Knockout Punch panels

Greenlee Tool Co. Rockford IL USA 1 1/16 Diameter AV1763 Knockout Punch panels

  • Belleville, Illinois, United States
  • Jan 30th
36mm x 2 Metric Right hand Die M36 x 2.0mm Pitch

36mm x 2 Metric Right hand Die M36 x 2.0mm Pitch

  • Shanghai, China
  • Jan 30th
5mm x .5 Metric Left hand Die M5 x 0.5mm Pitch

5mm x .5 Metric Left hand Die M5 x 0.5mm Pitch

  • Shanghai, China
  • Jan 30th
20mm x 2 Metric Right hand Die M20 x 2.0mm Pitch

20mm x 2 Metric Right hand Die M20 x 2.0mm Pitch

  • Shanghai, China
  • Jan 30th
3/4" - 36 Right hand Die 3/4 - 36 TPI

3/4" - 36 Right hand Die 3/4 - 36 TPI

  • Shanghai, China
  • Jan 30th
33mm x 2 Metric Right hand Die M33 x 2.0mm Pitch

33mm x 2 Metric Right hand Die M33 x 2.0mm Pitch

  • Shanghai, China
  • Jan 30th
12mm x 1.75 Metric Right hand Die M12 x 1.75mm Pitch

12mm x 1.75 Metric Right hand Die M12 x 1.75mm Pitch

  • Shanghai, China
  • Jan 30th
21mm x 1.5 Metric Right hand Die M21 x 1.5mm Pitch

21mm x 1.5 Metric Right hand Die M21 x 1.5mm Pitch

  • Shanghai, China
  • Jan 30th
3/8" - 36 Right hand Thread Die 3/8 - 36 TPI

3/8" - 36 Right hand Thread Die 3/8 - 36 TPI

  • Shanghai, China
  • Jan 30th
1 1/4" - 8 Right hand Thread Die 1-1/4 - 8 TPI

1 1/4" - 8 Right hand Thread Die 1-1/4 - 8 TPI

  • Shanghai, China
  • Jan 30th
Lot 1pcs Metric Right Hand Die M24x1.5 mm Dies Threading Tools

Lot 1pcs Metric Right Hand Die M24x1.5 mm Dies Threading Tools

  • CN, China
  • Jan 30th
Whitney Punch Set

Whitney Punch Set

  • Brooklyn, New York, United States
  • Jan 30th
8 - IRWIN HANSON DIE HEX 7/16" 14 NC, NEW

8 - IRWIN HANSON DIE HEX 7/16" 14 NC, NEW

  • Loveland, Ohio, United States
  • Jan 30th
UP TO 5 NEW REED RICO THREAD ROLL SETS M6 X1 4936033894

UP TO 5 NEW REED RICO THREAD ROLL SETS M6 X1 4936033894

  • Rochester, New York, United States
  • Jan 30th
NEW REED RICO THREAD ROLL SETS M8 X 1.25 C-3 4934026121

NEW REED RICO THREAD ROLL SETS M8 X 1.25 C-3 4934026121

  • Rochester, New York, United States
  • Jan 30th
5 [five] Dasco Pin Punches 3/16 inch point

5 [five] Dasco Pin Punches 3/16 inch point

  • Nampa, Idaho, United States
  • Jan 30th
Automatic Center Punch with Brass Handle-Easily Marks Wood Or Metal-No Hammer

Automatic Center Punch with Brass Handle-Easily Marks Wood Or Metal-No Hammer

  • Winona, Missouri, United States
  • Jan 30th
MACHINIST LATHE MILL Lot of Machinist Steel Letter and Number Stamp s Punch es s

MACHINIST LATHE MILL Lot of Machinist Steel Letter and Number Stamp s Punch es s

  • Morris Plains, New Jersey, United States
  • Jan 30th
DUNLAP Punch Press Heavy Duty Hand Press Model 4280 VINTAGE

DUNLAP Punch Press Heavy Duty Hand Press Model 4280 VINTAGE

  • Middletown, Pennsylvania, United States
  • Jan 30th
ROPER WHITNEY CO. USA HAND PUNCH

ROPER WHITNEY CO. USA HAND PUNCH

  • Corpus Christi, Texas, United States
  • Jan 30th

People who viewed this item also vieved

CNMG 190612-MR 4225 SANDVIK Insert

CNMG 190612-MR 4225 SANDVIK Insert

  • Windsor, Connecticut, United States
  • Jan 30th
10 Pack Carbide Inserts Top Quality RTW Brand SNMG 543M CQ-2 Brand New Lot Save

10 Pack Carbide Inserts Top Quality RTW Brand SNMG 543M CQ-2 Brand New Lot Save

  • San Tan Valley, Arizona, United States
  • Jan 30th
3 NOS Kobe 6-Flute Single End Mill Cutters 1 1/2", 1 3/4"

3 NOS Kobe 6-Flute Single End Mill Cutters 1 1/2", 1 3/4"

  • Chicago, Illinois, United States
  • Jan 30th
8 PCS 3/8" ENDMILLS 5 FLUTE TIALN COATED HIGH PERFORMANCE CARBIDE END MILL

8 PCS 3/8" ENDMILLS 5 FLUTE TIALN COATED HIGH PERFORMANCE CARBIDE END MILL

  • Pewaukee, Wisconsin, United States
  • Jan 30th
5/32 x 1-1/2 x 6" Solid Carbide Strip Rectangular Blank

5/32 x 1-1/2 x 6" Solid Carbide Strip Rectangular Blank

  • Louisville, Kentucky, United States
  • Jan 30th
1/8 x 7/8 x 6" Solid Carbide Strip Rectangular Blank

1/8 x 7/8 x 6" Solid Carbide Strip Rectangular Blank

  • Louisville, Kentucky, United States
  • Jan 30th
(#5044) New Machinist American Made 10mm Chucking Reamer

(#5044) New Machinist American Made 10mm Chucking Reamer

  • Troy, Michigan, United States
  • Feb 12th
(#5054) New Machinist American Made 4mm Chucking Reamer

(#5054) New Machinist American Made 4mm Chucking Reamer

  • Troy, Michigan, United States
  • Feb 12th
BTC 4" X 1/4" X 1-1/4" MILL MILLING CUTTER SLOT BLADE

BTC 4" X 1/4" X 1-1/4" MILL MILLING CUTTER SLOT BLADE

  • Chino, California, United States
  • Mar 7th
MORSE 3" X 1/4" X 1" STAGGERED MILL MILLING CUTTER SLOT BLADE

MORSE 3" X 1/4" X 1" STAGGERED MILL MILLING CUTTER SLOT BLADE

  • Chino, California, United States
  • Mar 7th
Sandvik CNGA 434A CC680 Ceramic Insert

Sandvik CNGA 434A CC680 Ceramic Insert

  • Johnson City, New York, United States
  • May 13th
10 NTK ceramic inserts Square 5/16 x 5/16 x 3/32 thick cnc lathe mill shop T4N

10 NTK ceramic inserts Square 5/16 x 5/16 x 3/32 thick cnc lathe mill shop T4N

  • Warren, Michigan, United States
  • May 13th
100 Sanding Sleeves 1/2" x 1/2" Woodcarving 1/8" Shank Fits Rotary Tools Metal

100 Sanding Sleeves 1/2" x 1/2" Woodcarving 1/8" Shank Fits Rotary Tools Metal

  • Woodburn, Oregon, United States
  • Jun 1st
Cleveland 49664 C8 C2 (Grade 883) Carbide Tipped Tool Bits, New Lot Of 2

Cleveland 49664 C8 C2 (Grade 883) Carbide Tipped Tool Bits, New Lot Of 2

  • Attleboro, Massachusetts, United States
  • Jun 2nd
DUMONT 1" Type "C" Plain Broach Collar

DUMONT 1" Type "C" Plain Broach Collar

  • Coventry, Rhode Island, United States
  • May 25th
3/4" Typoe "B" Plain Broach Bushing

3/4" Typoe "B" Plain Broach Bushing

  • Coventry, Rhode Island, United States
  • May 25th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies