Low Profile Ep Led Light - 2x2 Lay-in Troffer - C1, D1 - Paint Spray Booth Rated

US $1,785.96

Kemp, Texas, United States
Jan 30th

Open on mobile:

010615 Description You are bidding on the following NEW items: Larson Electronics - Low Profile Explosion Proof LED Light - 2x2 Lay-In Troffer - Class 1 Div 2 - Paint Spray Booth Rated Part # HALD-24-1X150LED Spec Sheet Video Click for more pictures and information Made in the USA The Larson Electronics HALD-24-1X150LED Hazardous Area LED Light Fixture is designed to provide operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. This LED panel mount fixture is ETL listed Class 1 Division 2, Class 2 Divisions 1 & 2,and is approved for use within paint spray booths. LED technology and compact design makes this lamp an excellent replacement upgrade option for paint booths and hazardous locations where flammable chemical/petrochemical vapors are present. THIS FIXTURE IS NOT APPROPRIATE FOR SURFACE MOUNT APPLICATIONS. The HALD-24-1X150LED Explosion Proof fixture is a 2x2 Class 1 Division 2 hazardous location lay-in LED light fixture is ideal for use in paint spray booths and hazardous environments where space for lighting fixtures is limited. This fixture is T5 temperature rated and is a fully integrated LED unit. The LED assembly is protected by an aluminum framed, hinged, 3/16' thick polycarbonate door that provides direct front access to the internal components. The lamp housing is designed for recessed mounting, and is constructed of non-sparking aluminum coated with a powder coated white finish. This Class 1 Division 2, Class 2 Division 1 & 2 explosion proof light fixture provides 12,500 lumens of high quality light while drawing only 150 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. A special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install. The integrated LED assembly in this unit features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twenty-four individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate. Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. This light is multi-voltage capable and can be operated with 100-277 VAC, 50/60Hz without any need for a special ballast. The aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LED luminaries. The LED lamp produces 12,500 lumens with a color temperature of 6000K and a color rendering index of 70 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. This fixture is designed for recessed mounting and requires a mounting hole to be made in booth panels capable of accommodating the fixture housing in order to provide the maximum amount of space in paint spray booth enclosures. Once mounted, this fixture's door frame will extend 3/8aЂ? into the spray booth. Applications: Paint spray booths and enclosed spaces where flammable chemical/petrochemical vapors are present. High Quality Features Superior LED Benefits 1. Low power consumption. 2. Fixture arrives assembled and lamped to reduce installation time and cost. 3. Instant on/off operation. 4. Fixture constructed of welded corrosion resistant copper free aluminum alloy. 5. 3/4' Wiring Hubs 6. Superior color rendering compared to HPS, LPS, MH. 7. Retains 80% lumen output after 60,000 operating hours. 8. Powder coated aluminum fixture body. 9. Low profile - Light weight 10. 12,500 Lumen output from only 150 watts 1. 60,000 hour lifespan. 2. Can SAVE 50% or more on energy. 3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs. 4. Reduces energy use and prolongs life-spans of peripheral cooling units (A/C, refrigeration) 5. 100% recyclable. 6. No toxins-lead, mercury. 7. No UV light, infrared radiation or CO2 emissions. 8. Qualifies buildings for LED and other sustainable business certifications. 9. Bright, even light maintains consistent color over time. 10. Instant on/off aЂ“ No flickering, delays or buzzing. 11. Very good color rendering. 12. Vibration/impact resistant. 13. Significantly cooler operation. 14. Less frequent outages, higher output improves workplace safety. Specifications / Additional Information HALD-24-1X150LED HAZLOC Lay-In Panel Mount Light ETL Ratings Lamp Type: LED ETL Listed U.S. and Canada Dimensions: 23 3/4aЂ?-L x 23 3/4'-W x 8'-D T5 Temperature Rating Flange Dimensions: 25 5/8aЂ?-L x 27 1/2'-W Class 1 Division 2 Groups C and D Total Watts: 150W Class 2 Division 1&2 Groups E,F,G Lumens: 12,500 Class 3 Voltage: Universal- 100-277V AC 50/60Hz cETL Certified to UL844 Standards Mounting: Recessed Panel Mounting cETL Certified to C22.2 Standards Weight: 40lbs Paint Spray Booth Approved Wiring Hub: 3/4' NPT Temp Rating: T5 -40A°C to +65A°C Color Temp: 6000K, 70-CRI. Lamp Life: 60,000+ Hours LED Driver Specs Input Voltage: 100-277 Volts AC Input Current: 1.8A Max Special Orders- Requirements Power Factor: >98% Contact us for special requirements Efficiency: >88% Toll Free: 1-800-369-6671 Output Voltage: 54V Max Intl: 1-903-498-3363 Output Current: 2.1A sales@larsonelectronics.com *5 year warranty replacement on this LED light (or LED bulbs for light fixtures with removable LED bulbs). After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, we will ship a new replacement. Scroll Down to Purchase- Seller Information Thanks for stopping by my auction. I have been an ebay member since Sept. 2004. View my other auctions Read my feedback reviews Verify my User ID history Winning Bidder When the auction closes, you will be notified via email with the payment information. Please complete the payment transaction within 72 hours of the end of the auction. I will ship the item within 72 hours of receiving payment. Payment Larson Electronics accepts Paypal, credit cards and bank wire transfers. Shipping All orders shipping to the United States will be sent via UPS without exception (including Alaska and Hawaii). Larson Electronics does not ship to PO BOXES...ever. International customers may owe duties and/or agent fees to their local governments when importing items from the United States. Those costs will be borne by the purchaser directly and are assessed and collected directly from the local customs agents in that country. The charges vary widely by country and Larson Electronics does not know, control or have any knowledge relating to those charges. The shipping costs collected as part of your Ebay purchase are purely for the transportation of the items from Larson Electronics to the purchaser. Sales Policy Larson Electronics sells quality products. In the event there is an issue, we will work with our customers to resolve the problem. You can contact us at 1-903-498-3363 or 1-800-369-6671. The shipping costs associated with any and all returns without technical merit is borne by the purchaser. Copyright 2004-2011 Larson Electronics, all rights reserved. Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Type	Light Fixture
MPN	HALD-24-1X150LED
Light Source	LED - Standard
Wattage	150W
Brand	Larson Electronics
Bulb Color	Cool White
Model	HALD-24-1X150LED