Lp2100-srt Heavy Duty Turntable Semi-automatic Stretch Wrap System (low Profile)

US $2400

  • Waukesha, Wisconsin, United States
  • May 24th
Specifications Production Speed 1-35 loads per hour (Single Turntable) NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time Capacity Maximum load weight: 4,000 lbs dynamic - 10,000 lbs static Maximum load size: 50" W x 50" L (71" max. load diagonal) x 80" H (plus up to 4" top overlap) Turntable 57" diameter laser-cut steel plate with surround deck protection Maintenance free - 42 roller bearing support system Turntable height 2.75" from floor ANSI # 50 direct chain drive c/w chain tensioner 3-12 RPM rotational speed c/w soft start acceleration 1/2 HP AC variable speed motor Final revolution deceleration and positive stop alignment Rugged surround deck for added protection, 3 sided loading and pit mounting Front and back forklift ports for easy movement Accu-Count exact turntable positioning system for additional film savings! Optional loading ramp 60" long x 48" wide complete with 10" level porch area available Film Carriage Elevator 1/2 HP AC variable speed motor ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device Maintenance free carriage guidance system Film Delivery System NEW Super Rapid Thread II ™ 20" capacity pre-stretch film carriage Special Film Threading Device - Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load. 1/2 HP AC variable speed motor Fully electronic dynamic dancer corner compensation 33% to 313% fixed stretch capability Pre-stretch ratio variable using easy sprocket change Carriage Descent Obstruction Safety Shut-Off Device Rapid Thread ™ Safety Door with auto power cut-off switch Side mounted film carriage for operator convenience and safety Superior film-to-roller contact area Lifetime warranty on pre-stretch rollers Electrical Input Requirements 115 Volts 1 Phase 60 Hz 15 Amps Features Control Features Electronic controls with LCD operator interface Power Off - On - Reset switch & Power On indicator light Single button Auto Wrap Cycle Start/Pause Cycle Pause for applying top sheets Reinforce Wrap control for mid-wrapping Base or Top Wraps First program Up Only or Up/Down wrap program Emergency Stop button Turntable Jog button Film Carriage Lower & Raise buttons Film Tension (Force-to-Load) control Separate film carriage raise & lower speed controls Operator programmable turntable speed control Triple beam automatic load height detection sensor for dark or shiny loads Separate 1 to 12 revolution top & bottom wrap control Selectable Reduced Film Tension parameters for wrapping top and/or bottom of load A - B - C wrap program selector with capability to input and store unique wrapping parameters for each program Structural Features All structural steel construction Forklift truck portable base structure design - lifting tubes included for front and rear access Structural steel tube machine tower with sheet metal covers Electro-static powder coated paint finish

Directions

Similar products from Wrapping Equipment

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies