Lubriquip Lubricant Filters and Strainers Trabon DUAL FILTERS, US $125.00 – Picture 0

Lubriquip Lubricant Filters and Strainers Trabon DUAL FILTERS, US $125.00 – Picture 1

Lubriquip Lubricant Filters and Strainers Trabon DUAL FILTERS, US $125.00 – Picture 2

Lubriquip Lubricant Filters and Strainers Trabon DUAL FILTERS, US $125.00 – Picture 3

Lubriquip Lubricant Filters and Strainers Trabon DUAL FILTERS, US $125.00 – Picture 4

Lubriquip Lubricant Filters And Strainers Trabon Dual Filters

US $125.00

Lakewood, Washington, United States
Jan 30th

Open on mobile:
QR code

Lubriquip Lubricant Filters and Strainers Trabon DUAL FILTERS Model 10TS FILTER Trabon® Dual Cartridge Type Filter assemblies are available with 10 or 25 micron nominal filtration elements for oil lubrication systems with up to 1-1/2 gpm flow and operating pressures up to 800 psi steady state. Both single and dual filter assemblies are available with either standard or extra-length cartridges. The Dual Filter assembly provides a face-mounted flow selector lever that directs oil to be filtered through one or the other cartridge. This provides a clean filter at the flip of the lever FEATURES Filter elements are easily replaceable. Dual Filter unit's design allows either filter cartridge to be replaced while oil flow is channeled through the other filter cartridge. Eliminates downtime for filter cartridge replacement. Bypass relief valve is standard with both units. Reduces risk of system damage in the event the filter cartridge becomes fully contaminated. Non bypass units are also available (for dual cartridge type filters only.) Optional extra-length filter cartridge provides longer filter cartridge life. Extends intervals between filter cartridge replacement. Optional gauges and differential pressure indicators provide filter status monitoring capability. SPECIFICATION Material: Housing ....................... Cast aluminum and steel Material: Element.................. Pleated Cellulose/Microglass Rated pressure (steady state) ............................. 800 psi maximum (55 bar) Bypass relief valve ................................. Factory-set to open at 50 psi (3.4 bar) Filter ratings ................................ 10 and 25 micron nominal Lubricant ....................................... Oil only, 5,000 SSU max. Weight (approx.) Single unit, standard element ..................... 5 lbs. (2.3 kg) extra-length element ............... 9 lbs. (4.1) kg) Dual unit, standard element ..................... 12 lbs. (5.5 kg) extra-length element .............. 19 lbs. (8.6 kg) Tie Bolt Assembly Torque ........... 50-55 ft lbs (68-74Nm) OPERATION Both the single and dual units operate in the same manner. Oil from the inlet is directed to the outside of the filter element, through the element, and then to the outlet port. The bypass relief valve opens when a pressure differential of 50 psi exists between the inlet and outlet side of the filter cartridge. This differential indicates that the filter is completely contaminated. With the bypass open, oil flows directly from the inlet to the outlet, bypassing the filter element. Non-bypass versions are also available for dual cartridge types. It is recommended that optional gauges be installed in both gauge ports to allow quick determination of the pressure differential. When these gauges indicate a pressure differential of 40 psi, the active filter element should be changed immediately. When complete clogging of the filter element occurs in a single cartridge unit, the lubricating system must be shut down and all pressure on both sides of the filter element must be totally relieved before changing the element. When complete clogging of a filter cartridge occurs in the dual cartridge unit, the flow selection lever should be moved to direct flow through the other filter. The clogged cartridge can then be replaced without shutting down the lubricating system. To replace a cartridge, turn the handle toward the cartridge to be replaced. This diverts lubricant flow through the opposite filter as indicated by arrow. With the handle pointing down, both filters are in operation. However, this mode of operation is not recommended because both filter elements will become contaminated simultaneously, eliminating one as a clean reserve.

Condition	New other (see details) : A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second, or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“unused condition”