+ Post new Ad
LYNDEX NIKKEN Milling Angle head Cat 40 taper MIMATIC, US $5,500.00 – Picture 0
LYNDEX NIKKEN Milling Angle head Cat 40 taper MIMATIC, US $5,500.00 – Picture 1
LYNDEX NIKKEN Milling Angle head Cat 40 taper MIMATIC, US $5,500.00 – Picture 2
LYNDEX NIKKEN Milling Angle head Cat 40 taper MIMATIC, US $5,500.00 – Picture 3
LYNDEX NIKKEN Milling Angle head Cat 40 taper MIMATIC, US $5,500.00 – Picture 4
LYNDEX NIKKEN Milling Angle head Cat 40 taper MIMATIC, US $5,500.00 – Picture 5
LYNDEX NIKKEN Milling Angle head Cat 40 taper MIMATIC, US $5,500.00 – Picture 6
LYNDEX NIKKEN Milling Angle head Cat 40 taper MIMATIC, US $5,500.00 – Picture 7
LYNDEX NIKKEN Milling Angle head Cat 40 taper MIMATIC, US $5,500.00 – Picture 8
LYNDEX NIKKEN Milling Angle head Cat 40 taper MIMATIC, US $5,500.00 – Picture 0
LYNDEX NIKKEN Milling Angle head Cat 40 taper MIMATIC, US $5,500.00 – Picture 1
LYNDEX NIKKEN Milling Angle head Cat 40 taper MIMATIC, US $5,500.00 – Picture 2
LYNDEX NIKKEN Milling Angle head Cat 40 taper MIMATIC, US $5,500.00 – Picture 3
LYNDEX NIKKEN Milling Angle head Cat 40 taper MIMATIC, US $5,500.00 – Picture 4
LYNDEX NIKKEN Milling Angle head Cat 40 taper MIMATIC, US $5,500.00 – Picture 5
LYNDEX NIKKEN Milling Angle head Cat 40 taper MIMATIC, US $5,500.00 – Picture 6
LYNDEX NIKKEN Milling Angle head Cat 40 taper MIMATIC, US $5,500.00 – Picture 7
LYNDEX NIKKEN Milling Angle head Cat 40 taper MIMATIC, US $5,500.00 – Picture 8

Lyndex Nikken Milling Angle Head Cat 40 Taper Mimatic

US $5,500.00

  • Chatsworth, California, United States
  • Jan 30th
Open on mobile:
QR code
BRAND NEW NEVER USED 90DEG MILLING ANGLE HEAD C40RAM-ER20-225T MIMATIC (ORIGINAL COST 8,800.00 +)
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Country/Region of Manufacture Japan
MPN 135276
Model C40RAM-ER20-225T MIMATIC

Directions

Similar products from CT Tapers & Holders

HPI Pioneer CAT40 1/2" End Mill Holder 1.75" Coolant Thru DIN AD/B **USED**

HPI Pioneer CAT40 1/2" End Mill Holder 1.75" Coolant Thru DIN AD/B **USED**

  • Elk Grove Village, Illinois, United States
  • Jan 30th
Generic Retention Knob / Pull Stud, Coolant Thru, # RK31246, Used, WARRANTY

Generic Retention Knob / Pull Stud, Coolant Thru, # RK31246, Used, WARRANTY

  • Grand Rapids, Michigan, United States
  • Jan 30th
Mazak Retention Knob / Pull Stud, Coolant Thru, # SP-1267, Used, WARRANTY

Mazak Retention Knob / Pull Stud, Coolant Thru, # SP-1267, Used, WARRANTY

  • Grand Rapids, Michigan, United States
  • Jan 30th
Generic Retention Knob / Pull Stud, Coolant Thru, 45 degree, CAT 50, WARRANTY

Generic Retention Knob / Pull Stud, Coolant Thru, 45 degree, CAT 50, WARRANTY

  • Grand Rapids, Michigan, United States
  • Jan 30th
Generic Retention Knob / Pull Stud, 45 degree, CAT 50, WARRANTY

Generic Retention Knob / Pull Stud, 45 degree, CAT 50, WARRANTY

  • Grand Rapids, Michigan, United States
  • Jan 30th
FITZ RITE CAT 50 1-1/4" END MILL HOLDER 5-1/4" PROJECTION STK 865

FITZ RITE CAT 50 1-1/4" END MILL HOLDER 5-1/4" PROJECTION STK 865

  • Wadley, Alabama, United States
  • Jan 30th
FITZ RITE CAT 50 1-1/4" END MILL HOLDER 5-1/4" PROJECTION STK 866

FITZ RITE CAT 50 1-1/4" END MILL HOLDER 5-1/4" PROJECTION STK 866

  • Wadley, Alabama, United States
  • Jan 30th
FITZ RITE CAT50 1" END MILL HOLDER 3-1/4" PROJECTION STK 868

FITZ RITE CAT50 1" END MILL HOLDER 3-1/4" PROJECTION STK 868

  • Wadley, Alabama, United States
  • Jan 30th
HARLEN TOOL COMPANY CAT 50 1-1/4" END MILL HOLDER 3-1/4" PROJECTION STK 870

HARLEN TOOL COMPANY CAT 50 1-1/4" END MILL HOLDER 3-1/4" PROJECTION STK 870

  • Wadley, Alabama, United States
  • Jan 30th
HARLEN TOOL COMPANY CAT 50 1-1/4" END MILL HOLDER 3-1/4" PROJECTION STK 872

HARLEN TOOL COMPANY CAT 50 1-1/4" END MILL HOLDER 3-1/4" PROJECTION STK 872

  • Wadley, Alabama, United States
  • Jan 30th
HPI Pioneer BT30 1/8 0.1250" End Mill Holder 2.36" Coolant Thru **NEW**

HPI Pioneer BT30 1/8 0.1250" End Mill Holder 2.36" Coolant Thru **NEW**

  • Elk Grove Village, Illinois, United States
  • Jan 30th
FITZ RITE CAT 50 1-1/4" END MILL HOLDER 5-1/4" PROJECTION STK 867

FITZ RITE CAT 50 1-1/4" END MILL HOLDER 5-1/4" PROJECTION STK 867

  • Wadley, Alabama, United States
  • Jan 30th
HPI Pioneer BT30 1/8 0.1250" End Mill Holder 4.13" Coolant Thru **NEW**

HPI Pioneer BT30 1/8 0.1250" End Mill Holder 4.13" Coolant Thru **NEW**

  • Elk Grove Village, Illinois, United States
  • Jan 30th
18.95 X 44.5MM M16 40B COOLANT-THRU RETENTION KNOB (3900-5372) - MADE IN TAIWAN

18.95 X 44.5MM M16 40B COOLANT-THRU RETENTION KNOB (3900-5372) - MADE IN TAIWAN

  • Chino, California, United States
  • Jan 30th
HPI Pioneer BT30 3/16 0.1875" End Mill Holder 4.13" Coolant Thru **NEW**

HPI Pioneer BT30 3/16 0.1875" End Mill Holder 4.13" Coolant Thru **NEW**

  • Elk Grove Village, Illinois, United States
  • Jan 30th
HPI Pioneer BT30 1/4" End Mill Holder 2.36" Coolant Thru **NEW**

HPI Pioneer BT30 1/4" End Mill Holder 2.36" Coolant Thru **NEW**

  • Elk Grove Village, Illinois, United States
  • Jan 30th
HPI Pioneer BT30 1/4" End Mill Holder 4.13" Coolant Thru **NEW**

HPI Pioneer BT30 1/4" End Mill Holder 4.13" Coolant Thru **NEW**

  • Elk Grove Village, Illinois, United States
  • Jan 30th
KENNAMETAL ERICKSON CAT40 TENSION/COMPRESSION TAP DRIVER

KENNAMETAL ERICKSON CAT40 TENSION/COMPRESSION TAP DRIVER

  • Wadley, Alabama, United States
  • Jan 30th
SHUTER CAT 40 TOOL CART HOLDS 28

SHUTER CAT 40 TOOL CART HOLDS 28

  • Wadley, Alabama, United States
  • Jan 30th
NEW CAT CT 40 TAPER ER 25 er-25 COLLET CHUCK TOOL HOLDER CNC

NEW CAT CT 40 TAPER ER 25 er-25 COLLET CHUCK TOOL HOLDER CNC

  • Harvard, Massachusetts, United States
  • Jan 30th

People who viewed this item also vieved

Rottler Boring Bar Company Tools with Hone

Rottler Boring Bar Company Tools with Hone

  • Ventura, California, United States
  • Feb 28th
DEVLIEG SS10-54 MICRO BORE , 1" SHANK x 8 1/2"L

DEVLIEG SS10-54 MICRO BORE , 1" SHANK x 8 1/2"L

  • Berlin, Connecticut, United States
  • Feb 28th
INGERSOLL Q0274039S9R10 END MILL CARBIDE INSERT INDEXABLE MILLING DRILLING TOOL

INGERSOLL Q0274039S9R10 END MILL CARBIDE INSERT INDEXABLE MILLING DRILLING TOOL

  • Kingman, Arizona, United States
  • Mar 3rd
2 PCS. ISCAR INSERTS XCGT 090300 45DT IC508 MACHINIST TOOLMAKER LATHE CNC SHOP

2 PCS. ISCAR INSERTS XCGT 090300 45DT IC508 MACHINIST TOOLMAKER LATHE CNC SHOP

  • Xenia, Ohio, United States
  • Mar 3rd
Universal Double Taper Type Z collets: 3/8, 7/16, 5/8, 41/64

Universal Double Taper Type Z collets: 3/8, 7/16, 5/8, 41/64

  • Piasa, Illinois, United States
  • Mar 5th
Bridgeport 7/8" Stub Arbor (CTAM# 7208)

Bridgeport 7/8" Stub Arbor (CTAM# 7208)

  • Sicklerville, New Jersey, United States
  • Mar 5th
gates tapered bushing 1008 3/4 NEW

gates tapered bushing 1008 3/4 NEW

  • Lake Havasu City, Arizona, United States
  • Mar 6th
Martin tapered bushing 1008 3/4 bore NEW

Martin tapered bushing 1008 3/4 bore NEW

  • Lake Havasu City, Arizona, United States
  • Mar 6th
27 used end mills

27 used end mills

  • Baldwinsville, New York, United States
  • Mar 9th
1-1/4" WELDON SHANK 1/2" END MILL HOLDER EXTENSION 4-1/8" OVERALL LENGTH

1-1/4" WELDON SHANK 1/2" END MILL HOLDER EXTENSION 4-1/8" OVERALL LENGTH

  • Cleveland, Ohio, United States
  • Mar 9th
EMUGE 5/16"-18 UNC - 2xD SOLID CARBIDE THRILLER THREAD MILL VHM TiCN

EMUGE 5/16"-18 UNC - 2xD SOLID CARBIDE THRILLER THREAD MILL VHM TiCN

  • Cleveland, Ohio, United States
  • Mar 12th
USED COMMAND USA BT40 END MILL HOLDER 1/2" EMH x 6.00" Gage x BT-40 B4K5-0500

USED COMMAND USA BT40 END MILL HOLDER 1/2" EMH x 6.00" Gage x BT-40 B4K5-0500

  • Fairfield, Iowa, United States
  • Mar 12th
1/2" HIGH PRECISION .002" KEYLESS DRILL CHUCK MT2 MT-2 Morse 2 Shank Metal Lathe

1/2" HIGH PRECISION .002" KEYLESS DRILL CHUCK MT2 MT-2 Morse 2 Shank Metal Lathe

  • Pittsburgh, Pennsylvania, United States
  • May 25th
Llambrich L40583B Drill Chuck Arbor - Shank: Straight Shank Taper: R8

Llambrich L40583B Drill Chuck Arbor - Shank: Straight Shank Taper: R8

  • Duncan, South Carolina, United States
  • May 25th
KWIK SWITCH 400 5/8" DIA ENDMILL HOLDER UNIVERSAL ENG END MILL LOT C12548

KWIK SWITCH 400 5/8" DIA ENDMILL HOLDER UNIVERSAL ENG END MILL LOT C12548

  • Dayton, Ohio, United States
  • May 26th
KWIK SWITCH 400 5/8" DIA ENDMILL HOLDER UNIVERSAL ENG END MILL LOT C12550

KWIK SWITCH 400 5/8" DIA ENDMILL HOLDER UNIVERSAL ENG END MILL LOT C12550

  • Dayton, Ohio, United States
  • May 26th
WHITNON INTERAL GRINDING SPINDLE 21000 RPM

WHITNON INTERAL GRINDING SPINDLE 21000 RPM

  • Santa Paula, California, United States
  • May 28th
HEALD RED HEAD 45-1B INTERNAL GRINDING SPINDLE

HEALD RED HEAD 45-1B INTERNAL GRINDING SPINDLE

  • Santa Paula, California, United States
  • May 28th
Sunnen Mandrel K6 185CH (LOC1931B)

Sunnen Mandrel K6 185CH (LOC1931B)

  • Laingsburg, Michigan, United States
  • May 30th
Sunnen Mandrel K6 185CH (LOC1932A)

Sunnen Mandrel K6 185CH (LOC1932A)

  • Laingsburg, Michigan, United States
  • May 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies