+ Post new Ad
M.A. Ford - 3/16 to 1 Inch Head Diameter, 3/16 to 1/2 Inch Shank Diameter, 100 D, US $182 – Picture 0
M.A. Ford - 3/16 to 1 Inch Head Diameter, 3/16 to 1/2 Inch Shank Diameter, 100 D, US $182 – Picture 0

M.a. Ford - 3/16 To 1 Inch Head Diameter, 3/16 To 1/2 Inch Shank Diameter, 100 D

US $182

  • Stonington, Connecticut, United States
  • Oct 20th
Open on mobile:
QR code
Minimum Head Diameter (Inch) 3/16 Minimum Head Diameter (Decimal Inch) 0.1875 Maximum Head Diameter (Inch) 1 Maximum Head Diameter (Decimal Inch) 1.0000 Minimum Included Angle 100 Maximum Included Angle 100 Number of Flutes 1 Countersink Material High Speed Steel Countersink Application Countersinking Minimum Shank Diameter (Inch) 3/16 Minimum Shank Diameter (Decimal Inch) 0.1875 Maximum Shank Diameter (Decimal Inch) 0.5000 Maximum Shank Diameter (Inch) 1/2 Maximum Overall Length (Decimal Inch) 2.75 Maximum Overall Length (Inch) 2-3/4 Minimum Overall Length (Inch) 1-1/2 Minimum Overall Length (Decimal Inch) 1.50 Includes Pilot (Yes/No) No Cutting Direction Right Hand End Type Single

Directions

Similar products from Solid Carbide Drill Bits

13.10MM (.5157) A3285TFL-13.1 TITEX DRILL 91206, 60MM LOF, 107MM OAL, 14MM SHANK

13.10MM (.5157) A3285TFL-13.1 TITEX DRILL 91206, 60MM LOF, 107MM OAL, 14MM SHANK

  • Glendale, Arizona, United States
  • Oct 21st
9/16" A3285TiN-9/16 TITEX DRILL 123026, 65MM LOF, 115MM OAL, 16MM SHANK

9/16" A3285TiN-9/16 TITEX DRILL 123026, 65MM LOF, 115MM OAL, 16MM SHANK

  • Glendale, Arizona, United States
  • Oct 21st
16.30MM (.6417) A3385TFL-16.3 TITEX DRILL 91439, 93MM LOF, 143MM OAL, 18MM SH

16.30MM (.6417) A3385TFL-16.3 TITEX DRILL 91439, 93MM LOF, 143MM OAL, 18MM SH

  • Glendale, Arizona, United States
  • Oct 21st
17/32" A3285TiN-17/32 TITEX DRILL 123025, 60MM LOF, 107MM OAL, 14MM SHANK

17/32" A3285TiN-17/32 TITEX DRILL 123025, 60MM LOF, 107MM OAL, 14MM SHANK

  • Glendale, Arizona, United States
  • Oct 21st
(3) Nachi Aqua 0.59mm Micro Carbide Drill, Aqua Coated AQMD0.59

(3) Nachi Aqua 0.59mm Micro Carbide Drill, Aqua Coated AQMD0.59

  • Fort Thomas, Kentucky, United States
  • Oct 21st
.250X 4 3/8 LENGTH SOLID CARBIDE TWIST DRILL WITH COOLANT HOLES

.250X 4 3/8 LENGTH SOLID CARBIDE TWIST DRILL WITH COOLANT HOLES

  • Johnston, Rhode Island, United States
  • Oct 21st
1/4" 2 FLUTE 90 DEGREE CARBIDE SPOT DRILL

1/4" 2 FLUTE 90 DEGREE CARBIDE SPOT DRILL

  • Elmhurst, Illinois, United States
  • Oct 20th
3/8" 2 FLUTE 90 DEGREE CARBIDE SPOT DRILL

3/8" 2 FLUTE 90 DEGREE CARBIDE SPOT DRILL

  • Elmhurst, Illinois, United States
  • Oct 20th
1/2" 2 FLUTE 90 DEGREE CARBIDE SPOT DRILL

1/2" 2 FLUTE 90 DEGREE CARBIDE SPOT DRILL

  • Elmhurst, Illinois, United States
  • Oct 20th
NEW ALR PRODUCT ALRPCBS A55523024 PCB PRINTED CIRCUIT BOARD

NEW ALR PRODUCT ALRPCBS A55523024 PCB PRINTED CIRCUIT BOARD

  • Apache Junction, Arizona, United States
  • Oct 20th
NEW M H FORD Solid Carbide Coolant Drill, 15.80mm, Tin Coated, No. 20862200T

NEW M H FORD Solid Carbide Coolant Drill, 15.80mm, Tin Coated, No. 20862200T

  • Hopkins, Minnesota, United States
  • Oct 20th
NEW GARR TOOL DRILL 5/16" X 2 X 7/16" BALL NOSE END MILL

NEW GARR TOOL DRILL 5/16" X 2 X 7/16" BALL NOSE END MILL

  • Rockford, Illinois, United States
  • Oct 20th
Lot if 6 Solid Carbide Machine Profiling Blades

Lot if 6 Solid Carbide Machine Profiling Blades

  • Rulo, Nebraska, United States
  • Oct 19th
*ORIGINAL* YG1, DREAM DRILLS 4,2mm, DH424042K, 5xD, without coolant holes

*ORIGINAL* YG1, DREAM DRILLS 4,2mm, DH424042K, 5xD, without coolant holes

  • Trencin, Slovakia
  • Oct 19th
HERTEL 118 deg Bright HSS SCR MACH DRILL BIT 55/64"

HERTEL 118 deg Bright HSS SCR MACH DRILL BIT 55/64"

  • Killeen, Texas, United States
  • Oct 19th
WALTER TITEX, A3488 Tip7,Alpha 44, Coolant Fed Drill, Resharpened, D-7.0 Germany

WALTER TITEX, A3488 Tip7,Alpha 44, Coolant Fed Drill, Resharpened, D-7.0 Germany

  • Killeen, Texas, United States
  • Oct 19th
Lot if 4 Solid Carbide Machine Profiling Blades

Lot if 4 Solid Carbide Machine Profiling Blades

  • Rulo, Nebraska, United States
  • Oct 19th
HUOT 033603-13500 Tap Dispensers - for Cutting Tool: Tap Size Range: 1/4'-1'

HUOT 033603-13500 Tap Dispensers - for Cutting Tool: Tap Size Range: 1/4'-1'

  • Duncan, South Carolina, United States
  • Jun 24th
Micro 100 GEM-437-4 4-Flute Micrograin Solid Carbide Single End Mill-Length: 1'

Micro 100 GEM-437-4 4-Flute Micrograin Solid Carbide Single End Mill-Length: 1'

  • Duncan, South Carolina, United States
  • Jun 24th
2 NEW 5.50 mm coated carbide through coolant drill bits

2 NEW 5.50 mm coated carbide through coolant drill bits

  • Ballston Spa, New York, United States
  • Jun 24th

People who viewed this item also vieved

STARCUT CARBIDE TIPPED GUN DRILL 1/2" Diameter 1717592 12ZA-2162 Gr. C2 COOLANT

STARCUT CARBIDE TIPPED GUN DRILL 1/2" Diameter 1717592 12ZA-2162 Gr. C2 COOLANT

  • Macomb, Michigan, United States
  • Jan 30th
AMEC Gen 2 # 3 T-A 1-9/16 inch Spade Drill Insert 453H-0118 Mat'l Cobalt AM200

AMEC Gen 2 # 3 T-A 1-9/16 inch Spade Drill Insert 453H-0118 Mat'l Cobalt AM200

  • Duluth, Minnesota, United States
  • Jan 30th
AMEC Gen 2 #0 T-A 11/16 inch Spade Drill Insert(2) 450H-0022 Mat'l C1 AM200

AMEC Gen 2 #0 T-A 11/16 inch Spade Drill Insert(2) 450H-0022 Mat'l C1 AM200

  • Duluth, Minnesota, United States
  • Jan 30th
3/4" Straight Shank Drill Bit

3/4" Straight Shank Drill Bit

  • Coventry, Rhode Island, United States
  • Jan 30th
SBO 7/8" ( .875 ) x 9" OAL - Carbide Tipped Gun Drill - Sharp - 1" Shank

SBO 7/8" ( .875 ) x 9" OAL - Carbide Tipped Gun Drill - Sharp - 1" Shank

  • Twinsburg, Ohio, United States
  • Jan 30th
STERLING .750 ( 3/4" ) x 17" OAL - Carbide Tipped Gun Drill - 1" Shank - England

STERLING .750 ( 3/4" ) x 17" OAL - Carbide Tipped Gun Drill - 1" Shank - England

  • Twinsburg, Ohio, United States
  • Jan 30th
6 Pcs. Ltr "Z" Gold & Black Heavy Duty Jobber Drills for Stainless & Hard Metal

6 Pcs. Ltr "Z" Gold & Black Heavy Duty Jobber Drills for Stainless & Hard Metal

  • Hamden, Connecticut, United States
  • Jan 30th
1.0" Heavy Duty Black & Gold Silver & Deming Drill-Stainless & Hard Metal

1.0" Heavy Duty Black & Gold Silver & Deming Drill-Stainless & Hard Metal

  • Hamden, Connecticut, United States
  • Jan 30th
6 Pc. 1/2" Gold & Black Heavy Duty Mechanic's Len Drills-Stainless & Hard Metal

6 Pc. 1/2" Gold & Black Heavy Duty Mechanic's Len Drills-Stainless & Hard Metal

  • Hamden, Connecticut, United States
  • Jan 30th
Reduced Shank Twist Drill Bit USA 25/32"

Reduced Shank Twist Drill Bit USA 25/32"

  • Coventry, Rhode Island, United States
  • Jan 30th
Reduced Shank Twist Drill Bit "PTD" 1-15/32"

Reduced Shank Twist Drill Bit "PTD" 1-15/32"

  • Coventry, Rhode Island, United States
  • Jan 30th
Reduced Shank Twist Drill Bit "PTD" 55/64"

Reduced Shank Twist Drill Bit "PTD" 55/64"

  • Coventry, Rhode Island, United States
  • Jan 30th
Hertel #HMS40087E 19/32" x 2-5/8" x 4-1/4" Cobalt TiAlN RH Screw Machine Drill

Hertel #HMS40087E 19/32" x 2-5/8" x 4-1/4" Cobalt TiAlN RH Screw Machine Drill

  • Toms River, New Jersey, United States
  • Jan 30th
17/64" screw machine drill bits PK of 12 pc 135 degree SP Tialn

17/64" screw machine drill bits PK of 12 pc 135 degree SP Tialn

  • Punta Gorda, Florida, United States
  • Jan 30th
#43 Screw Machine Drills "135 Degree Split Point"(BUTTERFIELD) 2 pack -24 Drills

#43 Screw Machine Drills "135 Degree Split Point"(BUTTERFIELD) 2 pack -24 Drills

  • Kingston, Ontario, Canada
  • Jan 30th
1-5/32" Chicago Latrobe #4MT Shank Drill

1-5/32" Chicago Latrobe #4MT Shank Drill

  • Lebanon, Tennessee, United States
  • Jan 30th
7/16" #3MT Drill Precision Twist Cobalt

7/16" #3MT Drill Precision Twist Cobalt

  • Hendersonville, Tennessee, United States
  • Jan 30th
9/16" #2MT Drill Precision Twist

9/16" #2MT Drill Precision Twist

  • Hendersonville, Tennessee, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies