+ Post new Ad
MACHINIST Clamp -- Thick Bulky Strong clamp 5" x 3/4" surface, US $19.99 – Picture 0
MACHINIST Clamp -- Thick Bulky Strong clamp 5" x 3/4" surface, US $19.99 – Picture 0

Machinist Clamp -- Thick Bulky Strong Clamp 5" X 3/4" Surface

US $19.99

  • Stanton, California, United States
  • Jun 21st
Open on mobile:
QR code
MACHINIST Clamp  Looks to be shop made clamp - No makers marks. Made very bulky with huge knurled adjusting nuts. Has a clamping surface 5" x 3/4" Condition: Excellent. NOTES ABOUT MY TOOLS: All tools are cleaned by hand only - NO power tools used. Mechanism are oiled and lubricated and will be working perfectly unless specified. Tools will often have a light coat of oil or tool wax when sent, they may be slightly greasy on first touch. 99% of tools listed are MADE IN THE USA, manufacturer origins will always be listed if known. Basically I clean the tools and remove rust and/or surface corrosion. Oil and get the mechanisms working perfectly. Give the metal a light polish. Finish with light oil or wax for protection. The result is great quality vintage tools for cheaper prices than brand new lower quality equivalents.
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “Excellent.”

Directions

Similar products from Other Workholding Tools

SMW AUTOBLOCK MASTER JAWS 3PCS. SET 315 CHUCK W / HARD JAWS GGK-2502

SMW AUTOBLOCK MASTER JAWS 3PCS. SET 315 CHUCK W / HARD JAWS GGK-2502

  • Bensenville, Illinois, United States
  • Jul 1st
Warner & Swasey Quick Action Slide Tool, M-1866

Warner & Swasey Quick Action Slide Tool, M-1866

  • Minot, Maine, United States
  • Jul 1st
Kitagawa B-206 8" Hydraulic Power Chuck 3 Jaw Lathe Chuck

Kitagawa B-206 8" Hydraulic Power Chuck 3 Jaw Lathe Chuck

  • Torrance, California, United States
  • Jun 30th
BROWN & SHARPE #220-200-1 RECESSING TOOL HOLDER

BROWN & SHARPE #220-200-1 RECESSING TOOL HOLDER

  • Belmont, Massachusetts, United States
  • Jun 29th
TG-10303P STEEL SOFT JAWS FOR TONGUE & GROOVE 10" CHUCK 3 PC SET

TG-10303P STEEL SOFT JAWS FOR TONGUE & GROOVE 10" CHUCK 3 PC SET

  • Grand Rapids, Michigan, United States
  • Jun 29th
DESTACO 82L12-4030 Pneumatic Power Clamp 105° Opening Angle 12mm Cylinder 35Nm

DESTACO 82L12-4030 Pneumatic Power Clamp 105° Opening Angle 12mm Cylinder 35Nm

  • Shelbyville, Tennessee, United States
  • Jun 28th
HENRY DISSTON & SONS , HELLER DIE FILER MACHINE FILES 10 ASSORTED 1/4" 0 & 00

HENRY DISSTON & SONS , HELLER DIE FILER MACHINE FILES 10 ASSORTED 1/4" 0 & 00

  • Coloma, Wisconsin, United States
  • Jun 27th
2" Round Die Holder Lathe Tailstock: Morse Taper #5 Shank (MT5 5MT), Used Good

2" Round Die Holder Lathe Tailstock: Morse Taper #5 Shank (MT5 5MT), Used Good

  • Lorain, Ohio, United States
  • Jun 24th
HARDINGE A2-5C 2" EMERGENCY STEP CHUCK, NEW IN BOX

HARDINGE A2-5C 2" EMERGENCY STEP CHUCK, NEW IN BOX

  • Harker Heights, Texas, United States
  • Jun 24th
Starrett 454 Scribber for 10" height gage IN STOCK RARE VINTAGE!

Starrett 454 Scribber for 10" height gage IN STOCK RARE VINTAGE!

  • Chicago, Illinois, United States
  • Jun 22nd
Precision Machinist Vise 2" Wide 6" Long Toolmakers 2 1/4" Tall

Precision Machinist Vise 2" Wide 6" Long Toolmakers 2 1/4" Tall

  • Conway, South Carolina, United States
  • Jun 20th
CNC Spring collet Holder Spindle 1pc ER11 Metal Sleeve Shaft For metalworking

CNC Spring collet Holder Spindle 1pc ER11 Metal Sleeve Shaft For metalworking

  • suzhou, China
  • Jun 20th
Hardinge 1" Hex 16C Collet used save $$$ NICE $$$ usa made the best

Hardinge 1" Hex 16C Collet used save $$$ NICE $$$ usa made the best

  • Pomona, California, United States
  • Jun 19th
Brown And Sharpe Toolmakers Clamp 599-754-20-1

Brown And Sharpe Toolmakers Clamp 599-754-20-1

  • Woodstock, Illinois, United States
  • Jun 19th
2 Desta Co. Squeeze Auction Stainless Steel Clamp 1 1/4" Throat Depth 325 SS

2 Desta Co. Squeeze Auction Stainless Steel Clamp 1 1/4" Throat Depth 325 SS

  • Marietta, Ohio, United States
  • Jun 19th
Hardinge 22c Collets Metric. 6.0mm + 9.0mm

Hardinge 22c Collets Metric. 6.0mm + 9.0mm

  • Langhorne, Pennsylvania, United States
  • Jun 18th
Brown & Sharpe 22H Feed Finger Bronze 1-1/8" Round Squirrel Cage

Brown & Sharpe 22H Feed Finger Bronze 1-1/8" Round Squirrel Cage

  • Jackson, Michigan, United States
  • Jun 18th
Shop Made Machinist Hold Down Like Starrett 54 K96

Shop Made Machinist Hold Down Like Starrett 54 K96

  • Nashville, Tennessee, United States
  • Jun 17th
Collet Nut 22.5*27mm Replacement 13MM Metal 1/2" Plunge Router New High strength

Collet Nut 22.5*27mm Replacement 13MM Metal 1/2" Plunge Router New High strength

  • suzhou, China
  • Jun 16th
K-8C-1.5-AP 8" Lathe Chuck Serrated Aluminium Sofht Jaws 3Pc Set

K-8C-1.5-AP 8" Lathe Chuck Serrated Aluminium Sofht Jaws 3Pc Set

  • Lakeland, Florida, United States
  • Jun 16th

People who viewed this item also vieved

ANGLE BLOCK 6" X 6" X 5"

ANGLE BLOCK 6" X 6" X 5"

  • Chagrin Falls, Ohio, United States
  • Jan 30th
Precision Ground 1-2-3 Blocks Set - Uncoated

Precision Ground 1-2-3 Blocks Set - Uncoated

  • Flushing, New York, United States
  • Jan 30th
ANGLE BLOCK 7" X 6" X 9 1/4"

ANGLE BLOCK 7" X 6" X 9 1/4"

  • Chagrin Falls, Ohio, United States
  • Jan 30th
Royal Heavy Duty CNC Spindle Type Live Center Extended Point MT#4 10214

Royal Heavy Duty CNC Spindle Type Live Center Extended Point MT#4 10214

  • Carrollton, Ohio, United States
  • Jan 30th
Piper #4 Morse Taper Live Center Series 304 HD

Piper #4 Morse Taper Live Center Series 304 HD

  • Johnson City, New York, United States
  • Jan 30th
Riten #4 Morse Taper 4.0" Bull Nose Live Center #56414

Riten #4 Morse Taper 4.0" Bull Nose Live Center #56414

  • Johnson City, New York, United States
  • Jan 30th
PHASE II 6"- 3 Jaws Direct Mounting Series Lathe Chuck

PHASE II 6"- 3 Jaws Direct Mounting Series Lathe Chuck

  • Tucson, Arizona, United States
  • Jan 30th
South Bend 4 Jaw Chuck no. 4207-55 (Inv.32020)

South Bend 4 Jaw Chuck no. 4207-55 (Inv.32020)

  • Portland, Connecticut, United States
  • Jan 30th
USED SET OF 4 T-SLOT TABLE FACE PLATE JAWS

USED SET OF 4 T-SLOT TABLE FACE PLATE JAWS

  • Lubbock, Texas, United States
  • Jan 30th
Vintage Cincinnati Tool Co No. 540-4 4” C Clamp w/ Butterfly Screw

Vintage Cincinnati Tool Co No. 540-4 4” C Clamp w/ Butterfly Screw

  • Littleton, Colorado, United States
  • Jan 30th
CLAMP MFG KANT-TWIST 421 6" NO-MAR T-HANDLE CLAMP MACHINISTS CLAMP NEW/UNUSED

CLAMP MFG KANT-TWIST 421 6" NO-MAR T-HANDLE CLAMP MACHINISTS CLAMP NEW/UNUSED

  • Ringwood, New Jersey, United States
  • Jan 30th
Crescent Pipe tongs- 4 qty- good condition

Crescent Pipe tongs- 4 qty- good condition

  • Santa Paula, California, United States
  • Jan 30th
BT40 HP COLLET CHUCK ER32 X 4"

BT40 HP COLLET CHUCK ER32 X 4"

  • Fairport, New York, United States
  • Jan 30th
BT40 SHELL MILL HOLDER 3/4" X 2.50"

BT40 SHELL MILL HOLDER 3/4" X 2.50"

  • Fairport, New York, United States
  • Jan 30th
ER40 TAP COLLET DIN 18MM

ER40 TAP COLLET DIN 18MM

  • Fairport, New York, United States
  • Jan 30th
Hardinge 5/8" Hex B7 Collet Pad

Hardinge 5/8" Hex B7 Collet Pad

  • Hendersonville, Tennessee, United States
  • Jan 30th
Hardinge 9/16" Hex B4 Feed Finger Collet Pad

Hardinge 9/16" Hex B4 Feed Finger Collet Pad

  • Hendersonville, Tennessee, United States
  • Jan 30th
Hardinge 15/16" Round B7 Collet Pad

Hardinge 15/16" Round B7 Collet Pad

  • Hendersonville, Tennessee, United States
  • Jan 30th
14" FACE PLATE FACEPLATE w/ 2-1/4"-8 THREAD MOUNT FOR LATHE SOUTHBEND , LOGAN

14" FACE PLATE FACEPLATE w/ 2-1/4"-8 THREAD MOUNT FOR LATHE SOUTHBEND , LOGAN

  • Chino, California, United States
  • Jan 30th
14" FACE PLATE FACEPLATE MOUNT FOR LATHE W/ L00 MOUNT

14" FACE PLATE FACEPLATE MOUNT FOR LATHE W/ L00 MOUNT

  • Chino, California, United States
  • Jan 30th
Vacuum table VT6040 CNC Clamps Engraving or Milling

Vacuum table VT6040 CNC Clamps Engraving or Milling

  • Exeter, Rhode Island, United States
  • Jan 30th
Troyke Rotary Table

Troyke Rotary Table

  • Saukville, Wisconsin, United States
  • Jan 30th
8" Super Spacer & 6 Masking Plates,Tailstock, Adjustable Chuck 0.0005" TIR- NEW

8" Super Spacer & 6 Masking Plates,Tailstock, Adjustable Chuck 0.0005" TIR- NEW

  • Madison Heights, Michigan, United States
  • Jan 30th
18" Troyke Rotary Table

18" Troyke Rotary Table

  • Euclid, Ohio, United States
  • Jan 30th
Kurt 6" soft jaw Aluminum set - will fit Toolex, Parlec, Chick, Jergens, etc

Kurt 6" soft jaw Aluminum set - will fit Toolex, Parlec, Chick, Jergens, etc

  • North Kingstown, Rhode Island, United States
  • Jan 30th
RIDGID 461 PIPE WELDING CLAMP VISE JIG FIXTURE AMERICAN MADE

RIDGID 461 PIPE WELDING CLAMP VISE JIG FIXTURE AMERICAN MADE

  • Decatur, Alabama, United States
  • Jan 30th
PIMA-200 Heavy Duty 7-1/2" Vise

PIMA-200 Heavy Duty 7-1/2" Vise

  • Garden City, Idaho, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies