+ Post new Ad
Machinist Heavy Duty Hardened V-Block With Top Hold Down Clamp, US $360 – Picture 0
Machinist Heavy Duty Hardened V-Block With Top Hold Down Clamp, US $360 – Picture 0

Machinist Heavy Duty Hardened V-block With Top Hold Down Clamp

US $360

  • Wheatland, Pennsylvania, United States
  • Jun 5th
Open on mobile:
QR code
 You are bidding on a Machinist heavy duty hardened V-Block with a heavy duty top holding clamp. The v-block measures 2 1/4" across the top of the V with the block being 2 7/8" wide, 2 7/8" long and 2 7/16" high. The top cap is heavy duty (1/2" thick) and 1 11/16" wide with 2 allen screws on each side. The cap can be moved to either end of the v-block. The cap does not have to be used at all as the v-block can be used independently.The v-block is hand made with all areas (a ground finish) and hardened surfaces. It has hold down slots on the sides and hold down holes on all 4 sides. There is no damage on either piece with some minor tarnished areas due to not being used. thanks for looking, I have other tools  in which I can ship more than one at a cheaper rate, so watch for my other tools. Email me if you have questions.

Directions

Similar products from Supporting Blocks & Sets

Parallel Set, 6" L, 7/8" - 1-3/4", 52-58 HRC , 8 Set, 1/2" Thick, 13-197-9 |QI3|

Parallel Set, 6" L, 7/8" - 1-3/4", 52-58 HRC , 8 Set, 1/2" Thick, 13-197-9 |QI3|

  • Saint Louis, Missouri, United States
  • Jun 5th
Cast Iron v Block 7-3/4"x4"x5-1/2" Tall

Cast Iron v Block 7-3/4"x4"x5-1/2" Tall

  • Middlebury, Indiana, United States
  • Jun 5th
Heavy Duty Large Cast Iron Machinest V Block 8"x6"x8"

Heavy Duty Large Cast Iron Machinest V Block 8"x6"x8"

  • Middlebury, Indiana, United States
  • Jun 5th
McKissick #621 18ton single sheave block 7/8 Wire Rope

McKissick #621 18ton single sheave block 7/8 Wire Rope

  • Simpsonville, South Carolina, United States
  • Jun 5th
Machinist V Block 4" wide x 2-3/4" long x 2-3/4" (Inv.34888)

Machinist V Block 4" wide x 2-3/4" long x 2-3/4" (Inv.34888)

  • Portland, Connecticut, United States
  • Jun 5th
TAEGUTEC Indexable Clamp Block Holder TTBU 25.4-26 2300123 [156]

TAEGUTEC Indexable Clamp Block Holder TTBU 25.4-26 2300123 [156]

  • Saint Louis, Missouri, United States
  • Jun 5th
Brown & Sharpe Magnetic V-block 750D 5-1/4" L x 2-1/2" W x 3-3/16" H FN46

Brown & Sharpe Magnetic V-block 750D 5-1/4" L x 2-1/2" W x 3-3/16" H FN46

  • Bloomfield, Connecticut, United States
  • Jun 5th
Lot of 2 General Hone G600E226-2 Hone Blocks

Lot of 2 General Hone G600E226-2 Hone Blocks

  • Peoria, Illinois, United States
  • Jun 5th
Big Horn 19623 4-Way Clamp Blocks, 2-Pack

Big Horn 19623 4-Way Clamp Blocks, 2-Pack

  • Escondido, California, United States
  • Jun 5th
MACHINIST TOOL LATHE MILL Mitutoyo Set of V Blocks and Parallel Blocks 181 - 961

MACHINIST TOOL LATHE MILL Mitutoyo Set of V Blocks and Parallel Blocks 181 - 961

  • Morris Plains, New Jersey, United States
  • Jun 5th
Taft Peirce V Block No. 9132 (Inv.34910)

Taft Peirce V Block No. 9132 (Inv.34910)

  • Portland, Connecticut, United States
  • Jun 5th
NEW - Lot of 3 Industrial Lathe Workholding Blocks - MPT MTP 1801

NEW - Lot of 3 Industrial Lathe Workholding Blocks - MPT MTP 1801

  • London, Ontario, Canada
  • Jun 5th
V-Block Set Machinist Milling Machine Surface Grinder Drill Press Pillow Pillar

V-Block Set Machinist Milling Machine Surface Grinder Drill Press Pillow Pillar

  • Clare, Michigan, United States
  • Jun 5th
Lot of 5 Kastalon SS4000063488 Gripper Block

Lot of 5 Kastalon SS4000063488 Gripper Block

  • Jun 5th
PLANER GAUGE ANGLE BLOCK?

PLANER GAUGE ANGLE BLOCK?

  • Lompoc, California, United States
  • Jun 5th
POMEROY V BLOCK VINTAGE TOOLMAKER

POMEROY V BLOCK VINTAGE TOOLMAKER

  • Baldwinville, Massachusetts, United States
  • Jun 5th
LOT OF SMALL SIZED SINE BARS

LOT OF SMALL SIZED SINE BARS

  • Baldwinville, Massachusetts, United States
  • Jun 5th
SPi Precision Parallel Set 8 Pair 1/2" x 6" x 7/8" - 1-3/4" 52-58 HRC 13-197-9 i

SPi Precision Parallel Set 8 Pair 1/2" x 6" x 7/8" - 1-3/4" 52-58 HRC 13-197-9 i

  • Saint Louis, Missouri, United States
  • Jun 5th
LEWIS BANKSTON 5-5/8” x 1-1/4” x 1/2" Precision Machine Parallel Machinist Tool

LEWIS BANKSTON 5-5/8” x 1-1/4” x 1/2" Precision Machine Parallel Machinist Tool

  • Euclid, Ohio, United States
  • Jun 5th
3/8” x 1-1/8” x 5-1/2” Precision Machine Parallel Machinist Tool

3/8” x 1-1/8” x 5-1/2” Precision Machine Parallel Machinist Tool

  • Euclid, Ohio, United States
  • Jun 5th

People who viewed this item also vieved

2PCS MT2 LIVE CENTER MORSE TAPER TRIPLE BEARING 2 MT .00039" NEW

2PCS MT2 LIVE CENTER MORSE TAPER TRIPLE BEARING 2 MT .00039" NEW

  • Troy, Michigan, United States
  • Jan 30th
Lathe Centers

Lathe Centers

  • Romeo, Michigan, United States
  • Jan 30th
Machinists 1/10B1 USABrown and Sharpe 1 x 2 x 4 Mag Trasfer block set

Machinists 1/10B1 USABrown and Sharpe 1 x 2 x 4 Mag Trasfer block set

  • Lutz, Florida, United States
  • Jan 30th
YUASA 12" 4 JAW SLOTTED LATHE INDEPENDENT CHUCK W/ PLAIN BACK

YUASA 12" 4 JAW SLOTTED LATHE INDEPENDENT CHUCK W/ PLAIN BACK

  • Chino, California, United States
  • Jan 30th
KITAGAWA 11" 3 JAW LATHE SCROLLING CHUCK 68002 W/ A1-11 MOUNT

KITAGAWA 11" 3 JAW LATHE SCROLLING CHUCK 68002 W/ A1-11 MOUNT

  • Chino, California, United States
  • Jan 30th
GERMAN MADE 10-1/2" 3 JAW LATHE CHUCK GT US479 W/ A1-8 MOUNT

GERMAN MADE 10-1/2" 3 JAW LATHE CHUCK GT US479 W/ A1-8 MOUNT

  • Chino, California, United States
  • Jan 30th
MITEE-BITE — Fixture Clamps Demo Set

MITEE-BITE — Fixture Clamps Demo Set

  • Montclair, California, United States
  • Jan 30th
Good Hand GH-200-WL HORIZONTAL HANDLE TOGGLE CLAMP Plastic Hand Grip - LOT OF 2

Good Hand GH-200-WL HORIZONTAL HANDLE TOGGLE CLAMP Plastic Hand Grip - LOT OF 2

  • ON, Canada
  • Jan 30th
Vintage Petersen Vise Grip 11R Welding C Clamp Welders Clamp Lot Vise Grip Lot

Vintage Petersen Vise Grip 11R Welding C Clamp Welders Clamp Lot Vise Grip Lot

  • Hillsdale, Indiana, United States
  • Jan 30th
7/8" Warner & Swasey #5-1A Collet, 471-1002 Nardco

7/8" Warner & Swasey #5-1A Collet, 471-1002 Nardco

  • Hendersonville, Tennessee, United States
  • Jan 30th
7/16" Collet, Nardco 461-1003

7/16" Collet, Nardco 461-1003

  • Hendersonville, Tennessee, United States
  • Jan 30th
5/8" Warner & Swasey #5 Collet, 4669-1004 Nardco

5/8" Warner & Swasey #5 Collet, 4669-1004 Nardco

  • Hendersonville, Tennessee, United States
  • Jan 30th
39.5" x 39.5" CINCINNATI T-40 HMC PALLET STEEL T-SLOT TABLE, 7 SLOT_TSLOT

39.5" x 39.5" CINCINNATI T-40 HMC PALLET STEEL T-SLOT TABLE, 7 SLOT_TSLOT

  • Grand Rapids, Michigan, United States
  • Jan 30th
MACHINIST/MINI LATHE Small Face Plate 3" with 9/16 X16 Threads

MACHINIST/MINI LATHE Small Face Plate 3" with 9/16 X16 Threads

  • Shasta Lake, California, United States
  • Jan 30th
Vintage machinist parallels, 10 sets of two see description for size

Vintage machinist parallels, 10 sets of two see description for size

  • Wanaque, New Jersey, United States
  • Jan 30th
AIrcraft/Aviation Tools 106 Wedgelock Clecos1/8", 5/32", 3/16" Cylindrical Cleco

AIrcraft/Aviation Tools 106 Wedgelock Clecos1/8", 5/32", 3/16" Cylindrical Cleco

  • San Antonio, Texas, United States
  • Jan 30th
5 Side Grip Clecos Genuine Cleko - Loc Heavy Duty 1" Side clamp Cleco

5 Side Grip Clecos Genuine Cleko - Loc Heavy Duty 1" Side clamp Cleco

  • Mineral Wells, Texas, United States
  • Jan 30th
SHARS 5 X 7" SLIDING ADJUSTABLE WORM GEAR ANGLE PLATE .0005" NEW

SHARS 5 X 7" SLIDING ADJUSTABLE WORM GEAR ANGLE PLATE .0005" NEW

  • Saint Charles, Illinois, United States
  • Jan 30th
Chick QL4 Vise Soft Jaws, Auction is for Set of 2

Chick QL4 Vise Soft Jaws, Auction is for Set of 2

  • Monterey, California, United States
  • Jan 30th
American scale co Vise #56 Great Condition 6" Jaws, Heavy

American scale co Vise #56 Great Condition 6" Jaws, Heavy

  • Chino Hills, California, United States
  • Jan 30th
2 (PAIR) SPEED HANDLES FOR KURT VISE OR SIMILAR VISES w/ 3/4 HEX *FREE SHIPPING*

2 (PAIR) SPEED HANDLES FOR KURT VISE OR SIMILAR VISES w/ 3/4 HEX *FREE SHIPPING*

  • Powder Springs, Georgia, United States
  • Jan 30th
12" ROTARY TABLE

12" ROTARY TABLE

  • Dunlap, Illinois, United States
  • Mar 25th
HAAS HRT-210 4th-AXIS ROTARY TABLE 8.3" DIA. BRUSH

HAAS HRT-210 4th-AXIS ROTARY TABLE 8.3" DIA. BRUSH

  • Chatsworth, California, United States
  • Mar 26th
Palmgren 10" Rotary Table

Palmgren 10" Rotary Table

  • Macungie, Pennsylvania, United States
  • Mar 26th
Kennametal DA180 Collet Chuck SS CNC Milling Drilling Metal Lathe Machinist Tool

Kennametal DA180 Collet Chuck SS CNC Milling Drilling Metal Lathe Machinist Tool

  • Yorktown, Virginia, United States
  • Mar 27th
SOUTH BEND LATHE - LOGAN COLLET CLOSER

SOUTH BEND LATHE - LOGAN COLLET CLOSER

  • Ashby, Massachusetts, United States
  • Mar 28th
USED TSD UNIVERSAL ACURA FLEX 1.00" STRAIGHT SHANK COLLET CHUCK EXTENSION 90528

USED TSD UNIVERSAL ACURA FLEX 1.00" STRAIGHT SHANK COLLET CHUCK EXTENSION 90528

  • Fairfield, Iowa, United States
  • Mar 28th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies