+ Post new Ad
Machinist milling clamps, hold-downs, parallels, misc., US $190 – Picture 0
Machinist milling clamps, hold-downs, parallels, misc., US $190 – Picture 0

Machinist Milling Clamps, Hold-downs, Parallels, Misc.

US $190

  • West Des Moines, Iowa, United States
  • Jan 30th
Open on mobile:
QR code
This is a lot of miscellaneous clamps, studs, t-nuts, and step blocks. I don't know much about these -- they came with a lot of equipment I bought and I have no use for them. They are dirty and have some surface rust so you will have to do a little clean up on them. The studs are all 3/8" dia. The slots on the clamps are bigger, 1/2" or larger. I think the bars on the right are shims or spacers of some kind. If you have any questions, please ask and I'll try to answer them.

Directions

Similar products from Clips & Jaws

3 Vintage Knu Vise No.P-1200 Adjustable Locking Clamp Pliers Welding Machinist

3 Vintage Knu Vise No.P-1200 Adjustable Locking Clamp Pliers Welding Machinist

  • United States
  • Jan 30th
Machinist toolmakers handy book

Machinist toolmakers handy book

  • Potsdam, New York, United States
  • Jan 30th
Pivot Clamp Clamping Adjustable Cast Iron Bridgeport Milling Used Workholding

Pivot Clamp Clamping Adjustable Cast Iron Bridgeport Milling Used Workholding

  • Seattle, Washington, United States
  • Jan 30th
MACHINIST LATHE TOOLS LOT OF 2 KANT TWIST LARGE 4 1/2" #415 CLAMPS

MACHINIST LATHE TOOLS LOT OF 2 KANT TWIST LARGE 4 1/2" #415 CLAMPS

  • Carson, California, United States
  • Jan 30th
6 KANT TWIST Clamps 1” 3” & 4 1/2” Saxton Machinist Welding T-Handle (610)

6 KANT TWIST Clamps 1” 3” & 4 1/2” Saxton Machinist Welding T-Handle (610)

  • Chandler, Arizona, United States
  • Jan 30th
Starrett 161-B Toolmakers Clamps 1 3/4 in

Starrett 161-B Toolmakers Clamps 1 3/4 in

  • Rochester, New York, United States
  • Jan 30th
DE-SAT-CO Clamp Cam Lock Holding Fixture #215-U Tool

DE-SAT-CO Clamp Cam Lock Holding Fixture #215-U Tool

  • North Bend, Oregon, United States
  • Jan 30th
# 161E - L.S. STARRETT's Largest Quality Toolmaker Parallel Steel Clamp U.S.A

# 161E - L.S. STARRETT's Largest Quality Toolmaker Parallel Steel Clamp U.S.A

  • Roseville, Michigan, United States
  • Jan 30th
J.H. Williams No 5 Heavy Service C-Clamp 5-1/2"Opening

J.H. Williams No 5 Heavy Service C-Clamp 5-1/2"Opening

  • Hastings, Nebraska, United States
  • Jan 30th
Machinists 12/27A BUY NOW XXL wide capacity Toolmaters Parallel Clamp

Machinists 12/27A BUY NOW XXL wide capacity Toolmaters Parallel Clamp

  • Lutz, Florida, United States
  • Jan 30th
Lot of 2 New Carr-Lane Toggle Clamps CL-251-TC Carr Lane NIP

Lot of 2 New Carr-Lane Toggle Clamps CL-251-TC Carr Lane NIP

  • Maineville, Ohio, United States
  • Jan 30th
Wilton 412 C-Clamp 2-12 1/4"Jaw Open 6 5/16"Deep Throat Drop Forge Steel USA

Wilton 412 C-Clamp 2-12 1/4"Jaw Open 6 5/16"Deep Throat Drop Forge Steel USA

  • Phoenix, Arizona, United States
  • Jan 30th
heavy duty steel plate vertical lift clamp

heavy duty steel plate vertical lift clamp

  • Steinhatchee, Florida, United States
  • Jan 30th
Williams,No.6 Vulcan.,Bridge ,Boiler,heavy duty C-clamp, 3" to 6-1/2" Cap.

Williams,No.6 Vulcan.,Bridge ,Boiler,heavy duty C-clamp, 3" to 6-1/2" Cap.

  • Cocoa, Florida, United States
  • Jan 30th
5 Wedgelock 4.5" Cylindrical Clecos 1/2" to 1 1/2" grip .177 Cleco Fasteners

5 Wedgelock 4.5" Cylindrical Clecos 1/2" to 1 1/2" grip .177 Cleco Fasteners

  • Mineral Wells, Texas, United States
  • Jan 30th
Hargrave 3 in.,Bridge, Boiler, Heavy Duty C-clamp,0 to 3-3/8 in. cap

Hargrave 3 in.,Bridge, Boiler, Heavy Duty C-clamp,0 to 3-3/8 in. cap

  • Cocoa, Florida, United States
  • Jan 30th
Adjustable Handle Clamping Lever 3/8"-16 x 1" w/stud MSC# 06853329 3-Pcs-New

Adjustable Handle Clamping Lever 3/8"-16 x 1" w/stud MSC# 06853329 3-Pcs-New

  • Shawnee, Kansas, United States
  • Jan 30th
L.S. Starrett No. 161-E, Machinist Parallel Clamp, USA

L.S. Starrett No. 161-E, Machinist Parallel Clamp, USA

  • New Milford, New Jersey, United States
  • Jan 30th
Gruber HD Gee Mold Clamps, 12 each, #103615

Gruber HD Gee Mold Clamps, 12 each, #103615

  • Broomfield, Colorado, United States
  • Jan 30th
Adjustable Milling Machine Table Clamping Kit 1/2" T Slot

Adjustable Milling Machine Table Clamping Kit 1/2" T Slot

  • Chino, California, United States
  • Jan 30th

People who viewed this item also vieved

AF Series Collets,qty 32 from 1/8 to 3/4. acura flex/universal AF 3/4 series

AF Series Collets,qty 32 from 1/8 to 3/4. acura flex/universal AF 3/4 series

  • Wethersfield, Connecticut, United States
  • Mar 8th
LATHE COLLETS,3J,16C,1 INCH,turning,boring,Lyndex,cnc,lathe,quick change

LATHE COLLETS,3J,16C,1 INCH,turning,boring,Lyndex,cnc,lathe,quick change

  • Reno, Nevada, United States
  • Mar 8th
5C COLLETS,emergency,3,tool holding,1/4 inch hole,3 pins,fixturing,lathe,mill,

5C COLLETS,emergency,3,tool holding,1/4 inch hole,3 pins,fixturing,lathe,mill,

  • Reno, Nevada, United States
  • Mar 8th
Nice LEVIN #3 Index Plate and Hub, for 10mm, 8mm Watchmaker's Jeweler's Lathe

Nice LEVIN #3 Index Plate and Hub, for 10mm, 8mm Watchmaker's Jeweler's Lathe

  • La Habra, California, United States
  • Mar 10th
ANGLE PLATE 4-7/16" x 3-7/16" x 3" x 5/8" THICK WITH 1/2" SLOTS

ANGLE PLATE 4-7/16" x 3-7/16" x 3" x 5/8" THICK WITH 1/2" SLOTS

  • La Puente, California, United States
  • Mar 10th
HEAVY DUTY MILLING ANGLE PLATE 24" X 9" X 8"

HEAVY DUTY MILLING ANGLE PLATE 24" X 9" X 8"

  • La Puente, California, United States
  • Mar 10th
CNC Lathe 2 Jaw Power Chuck AutoBlok 16” OD x 3 1/4 ” ID A1-11 Mount

CNC Lathe 2 Jaw Power Chuck AutoBlok 16” OD x 3 1/4 ” ID A1-11 Mount

  • Lake Saint Louis, Missouri, United States
  • Mar 12th
Engine Lathe 4 Jaw Chuck 15” OD x 3 1/4 ” ID A1-8” Mount Sweden

Engine Lathe 4 Jaw Chuck 15” OD x 3 1/4 ” ID A1-8” Mount Sweden

  • Lake Saint Louis, Missouri, United States
  • Mar 12th
NEW! Jacobs K4 Chuck Key for Portable Drills #3655DD Free Shipping!

NEW! Jacobs K4 Chuck Key for Portable Drills #3655DD Free Shipping!

  • Richmond, Maine, United States
  • Mar 12th
RARE COMPLETE WILTON POWRARM 301 BABY VISE WITH LIFT SWIVEL POWERARM

RARE COMPLETE WILTON POWRARM 301 BABY VISE WITH LIFT SWIVEL POWERARM

  • Covina, California, United States
  • Mar 12th
8" Angle Lock Milling Machine Vise with Swivel Base

8" Angle Lock Milling Machine Vise with Swivel Base

  • Anaheim, California, United States
  • Mar 12th
Wilton Vise UX121079

Wilton Vise UX121079

  • National Park, New Jersey, United States
  • Mar 12th
NICE ENCO MT3 LIVE CENTER LATHE MACHINIST TOOL ENCO MADE IN FRANCE 3MT WITH BOX

NICE ENCO MT3 LIVE CENTER LATHE MACHINIST TOOL ENCO MADE IN FRANCE 3MT WITH BOX

  • United States
  • May 31st
ROYAL SUPER TRI BEARING PRECISION LIVE CENTER - #3MT,HAUPPAUGE N,Y. USA

ROYAL SUPER TRI BEARING PRECISION LIVE CENTER - #3MT,HAUPPAUGE N,Y. USA

  • Los Angeles, California, United States
  • Jun 1st
Carbide Tipped MT4 Dead Center Nice Shape!

Carbide Tipped MT4 Dead Center Nice Shape!

  • Victoria, British Columbia, Canada
  • Jun 1st
(2) CUTAWL REPLACEMENT LIGHT BULBS FOR K-10, K-11, K-12, K-16; 1STAWARD SUPPLIES

(2) CUTAWL REPLACEMENT LIGHT BULBS FOR K-10, K-11, K-12, K-16; 1STAWARD SUPPLIES

  • Waseca, Minnesota, United States
  • May 28th
K.O. Lee Co. Expanding Arbor Mandrel? M1A M1AC

K.O. Lee Co. Expanding Arbor Mandrel? M1A M1AC

  • Cambridge, Maryland, United States
  • May 28th
K.O. LEE NO. B989 ROTATING MOUNTABLE CLAMP CUTTER RADIAL GRINDING FIXTURE B789V

K.O. LEE NO. B989 ROTATING MOUNTABLE CLAMP CUTTER RADIAL GRINDING FIXTURE B789V

  • Robertsdale, Alabama, United States
  • May 28th
VINTAGE LOT OF 3 SMALL MACHINIST TOOL HOLDING JACKS

VINTAGE LOT OF 3 SMALL MACHINIST TOOL HOLDING JACKS

  • Bremen, Indiana, United States
  • Jun 1st
Precision V-Block & Clamp Set 50x60x60mm (2 pcs) Gr.0 Prismen Winkelprisma Satz

Precision V-Block & Clamp Set 50x60x60mm (2 pcs) Gr.0 Prismen Winkelprisma Satz

  • Ukraine, Ukraine
  • Jun 1st
Precision V-Block & Clamp Set 50x60x60mm (2 pcs) Gr.1 Prismen Winkelprisma Satz

Precision V-Block & Clamp Set 50x60x60mm (2 pcs) Gr.1 Prismen Winkelprisma Satz

  • Ukraine, Ukraine
  • Jun 1st
**GREAT COND** KITAGAWA PRECISION INDEXER 8" PLATE TECNARA 4TH & 5TH AXIS

**GREAT COND** KITAGAWA PRECISION INDEXER 8" PLATE TECNARA 4TH & 5TH AXIS

  • Bensenville, Illinois, United States
  • Jun 1st
3" PRECISION TILTING ROTARY TABLE, Part#TTSK-75- NEW

3" PRECISION TILTING ROTARY TABLE, Part#TTSK-75- NEW

  • Madison Heights, Michigan, United States
  • Jun 1st
TSUDAKOMA RZ160 INDEXER, ROTARY TABLE, WITH CONTROL TPC JR

TSUDAKOMA RZ160 INDEXER, ROTARY TABLE, WITH CONTROL TPC JR

  • Aurora, Illinois, United States
  • Jun 1st
"Sizzix Paper Leather 6""X6"" Sheets 20/Pkg-Basics Assorted"

"Sizzix Paper Leather 6""X6"" Sheets 20/Pkg-Basics Assorted"

  • Hickory Hills, Illinois, United States
  • Jun 7th
Die Pump Cart with Vise

Die Pump Cart with Vise

  • Bridgeport, Connecticut, United States
  • Jun 7th
Tecnara  BT40 TG100 Collet Chuck #240-100-6

Tecnara  BT40 TG100 Collet Chuck #240-100-6

  • Bountiful, Utah, United States
  • Jun 7th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies