US $99.99
| Condition: |
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully
operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
...
|
Gage Type | SINE BAR |
| Country/Region of Manufacture | United States | ||
| Custom Bundle | No | ||
| Modified Item | No | ||
| MPN | Does Not Apply | ||
| UPC | Does not apply |
Directions
Similar products from Multidetectors & Inspection Gauges
Machinist Toolmaker Tool Lot Starrett Mitutoyo Helios Greenfield Taps
Starrett No.1010 Pocket Dial Indicator Gage .001
HHIP 3900-3926 Z Type Tool Holder Bushing 1-3/4" OD x 3/4" ID
2 Federal Machinists Measurement Dial Gage .001 With Stand
Starrett No. 272B METRIC Fillet and Radius Gage & No. 6
Pi-Tape 48-60 inch (Inside Diameter) Excellent Condition!
Pi-Tape 0.800-6 inch (Outside Diameter) Good Condition.
Vintage Starrett Height Gage Attachment / NOS / PRICE IS FOR ONE TOOL
Moore Data Gage Program Module Card
STARRETT 66T Thickness Gage, Good Condition, Original Box, Made in USA
Nut & Bolt Thread Checker (Inch & Metric), Original Version (SWTC-26)
Used Parallel Set in great condition
Fowler Electronic Height Gage- 24 in
Baker Type J08A Depth Gauge 0.01 - 25 mm With Universal Magentic V-block Stand
Set (4) # S-112-4 Adjustable Parallels, Parallel, New Old Stock, Made in Japan
15" Draper Height Gauge Fully Adjustable,Inch,Metric,Magnifying Lens,Stainless
Precision Brand 78905 Plastic Thickness Gage Fan Blade Assortment, 0.001-0.03...
Brown & Sharpe 1" 25.40mm Height Setting Master 99.1011.274
Starrett 666 .0015" x 1/2" x 10' Thickness Gage Feeler Shim Stock Roll G2
Vermont Gage 185 Piece, 1.3-4.98 mm Diameter Plug and Pin Gage Set Minus 0.01...
People who viewed this item also vieved
STARRETT INSIDE OUTSIDE CALIPERS SET OF FOUR 3 3/4" AND 7" SPRING LOADED
Brown & Sharpe 570 Vernier Caliper 25" .001 DD14/DD15
Renishaw TP200 CMM Probe Body and 2 TP200 LF Modules Tested with 90 day Warranty
Renishaw PH10M Motorized CMM Probe Head in Box with PAA1 Adapter 90 Day Warranty
.050 & .100 micrometer caliper gauge blocks made by Fonda
Starrett Webber Gage Block Set 14 Piece Machinist Inspection
Blake Co-Axial Co-Ax Indicator Set .0005" Perfect Condition Machinist
BROWN AND SHARP BIG DIAL INDICATOR MACHINIST TOOL INSPECTION (VE - BX)
L.S. STARRETT 657 Magnetic Base Dial Indicator Holder Machinist Stand Tooling
MG MAG BASE DIAL INDICATOR GAGE GAUGE MAGNETIC HOLDER M8F MBD-14002-E
STARRETT MICROMETER 2" NEW IN ORIGINAL BOX
Fowler 72-225-226 Digit Reading Depth Micrometer 0-6in. (72225226)
Better Quality Small Type 2 Axis Digital Readout DRO High Cost Performance
Brand New 2 Axis Digital Readout DRO Best Quality High Cost Performance
Starrett No.237 Rule & Depth Gage No.610N- 6" Rule 32nds one side 64ths other
Starrett No.193 Protractor Satin Chrome Finish 0-180 Degrees in both Directions
Folding Steel Rule 24” x 1/2 ” 3-Joint Machinist Tool Germany Antique
12 Inch Machinest Scale Stainless
20" PRECISION SINGLE ANGLE CAST IRON STRAIGHT EDGE
36" PRECISION CAST IRON BOX PARALLEL
Cast Iron Surface Plate 15-3/4" x 17-3/4" Inspection Layout
GRANITE SURFACE PLATE 60'' X 48'' X 8''
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies