+ Post new Ad
Machinist Slotted Right Angle Plate - Face Measures 12"x10"x1.25"- 100 lbs., US $790 – Picture 0
Machinist Slotted Right Angle Plate - Face Measures 12"x10"x1.25"- 100 lbs., US $790 – Picture 0

Machinist Slotted Right Angle Plate - Face Measures 12"x10"x1.25"- 100 Lbs.

US $790

  • Wilmette, Illinois, United States
  • Jun 1st
Open on mobile:
QR code
Machinist T-Slotted Right Angle Plate - Face Measures 12"x10"x1.25"- 100 lbs. This is a very heavy duty T-Slotted right angle machinist plate. You can see the steel face in the pics. This plate weighs in at right around 100 lbs. Does have a part # of T-80246. It may be manufactured by Taft Peirce. Cannot confirm however.  You can see the threaded and non-threaded holes in the base of the plate. Very clean.  I am listing this as "local pickup only" due to the weight. I am happy to ship upon request but the buyer would have to assume the costs with shipping.  Please email me with any questions. Please see pictures for more detail.  

Directions

Similar products from Fittings & Plates

Starrett No 191 Jack Screw VINTAGE

Starrett No 191 Jack Screw VINTAGE

  • Surprise, Arizona, United States
  • Jun 1st
5C COLLET CLOSER HORIZONTAL / VERTICAL FIXTURE MILL GRINDING

5C COLLET CLOSER HORIZONTAL / VERTICAL FIXTURE MILL GRINDING

  • San Diego, California, United States
  • Jun 1st
117" x 52"x 10" Steel Welding T-Slot Table Cast Iron Layout Plate Weld Fixture

117" x 52"x 10" Steel Welding T-Slot Table Cast Iron Layout Plate Weld Fixture

  • Grand Rapids, Michigan, United States
  • Jun 1st
K O Lee B922 L Tool Cutter Grinder Tailstock Bench Center Fixture

K O Lee B922 L Tool Cutter Grinder Tailstock Bench Center Fixture

  • Yorktown, Virginia, United States
  • Jun 1st
A2-6 Adaptor Plates

A2-6 Adaptor Plates

  • Lancaster, New York, United States
  • Jun 1st
GEOMETRIC STYLE "A" THREAD CHASER GRINDING FIXTURE ***XLNT*** FREE SHIPPING

GEOMETRIC STYLE "A" THREAD CHASER GRINDING FIXTURE ***XLNT*** FREE SHIPPING

  • Highland, New York, United States
  • Jun 1st
Machinist lathe index plate indexing face plate 5" diameter 1 1/2" center bore

Machinist lathe index plate indexing face plate 5" diameter 1 1/2" center bore

  • New Britain, Connecticut, United States
  • Jun 1st
Machinist lathe index plate indexing face plate 4 1/2" diameter 1 1/2" center bo

Machinist lathe index plate indexing face plate 4 1/2" diameter 1 1/2" center bo

  • New Britain, Connecticut, United States
  • Jun 1st
Dual Locking Precision Milling Machine Vise Clamping jaw BI-LOK CHICK MACHINE CO

Dual Locking Precision Milling Machine Vise Clamping jaw BI-LOK CHICK MACHINE CO

  • Houston, Texas, United States
  • Jun 1st
PRECISION SINE 5" Sine Bar

PRECISION SINE 5" Sine Bar

  • Atlanta, Georgia, United States
  • Jun 1st
Lathe 4 Jaw Chuck Adjustable Sliding Fixture, 2 1/4" Threaded Arbor, 5 1/2" x 4"

Lathe 4 Jaw Chuck Adjustable Sliding Fixture, 2 1/4" Threaded Arbor, 5 1/2" x 4"

  • Saint Clair, Michigan, United States
  • Jun 1st
Machinist Tool/Drilling Fixture Previous Owner

Machinist Tool/Drilling Fixture Previous Owner

  • Springfield, Missouri, United States
  • Jun 1st
GSC850, Stilson, Gripper, New Old Stock

GSC850, Stilson, Gripper, New Old Stock

  • Warren, Michigan, United States
  • Jun 1st
GSC860, Stilson, Gripper, New Old Stock

GSC860, Stilson, Gripper, New Old Stock

  • Warren, Michigan, United States
  • Jun 1st
GSC870, Stilson, Gripper, New Old Stock

GSC870, Stilson, Gripper, New Old Stock

  • Warren, Michigan, United States
  • Jun 1st
LOT OF CARR LANE MILL WORK HOLD DOWNS CLAMPS forged, tapped heel

LOT OF CARR LANE MILL WORK HOLD DOWNS CLAMPS forged, tapped heel

  • Saint Paul, Minnesota, United States
  • Jun 1st
LOT OF CARR LANE, VULCAN,JERGANS MILL WORK HOLD DOWN CLAMPS forged, tapped heel

LOT OF CARR LANE, VULCAN,JERGANS MILL WORK HOLD DOWN CLAMPS forged, tapped heel

  • Saint Paul, Minnesota, United States
  • Jun 1st
LOT OF CARR LANE and VULCAN MILL WORK HOLD DOWN CLAMPS forged, tapped heel

LOT OF CARR LANE and VULCAN MILL WORK HOLD DOWN CLAMPS forged, tapped heel

  • Saint Paul, Minnesota, United States
  • Jun 1st
LOT OF CARR LANE, VULCAN, JARGANS MILL WORK HOLD DOWN CLAMPS forged tapped heel

LOT OF CARR LANE, VULCAN, JARGANS MILL WORK HOLD DOWN CLAMPS forged tapped heel

  • Saint Paul, Minnesota, United States
  • Jun 1st
LTN8201, Stilson, T-Nut, New Old Stock

LTN8201, Stilson, T-Nut, New Old Stock

  • Warren, Michigan, United States
  • May 31st

People who viewed this item also vieved

USED LATHE CENTER MORSE TAPER #4 6" OAL GOOD CONDITION 1572

USED LATHE CENTER MORSE TAPER #4 6" OAL GOOD CONDITION 1572

  • Tekamah, Nebraska, United States
  • Jan 30th
USED LATHE CENTER MORSE TAPER #4 6" OAL GOOD CONDITION 1571

USED LATHE CENTER MORSE TAPER #4 6" OAL GOOD CONDITION 1571

  • Tekamah, Nebraska, United States
  • Jan 30th
(3) dead centers / morse taper 4

(3) dead centers / morse taper 4

  • Imlay City, Michigan, United States
  • Jan 30th
CUSHMAN 7-1/2" 3 JAW LATHE CHUCK W/ PLAIN BACK MOUNT #734

CUSHMAN 7-1/2" 3 JAW LATHE CHUCK W/ PLAIN BACK MOUNT #734

  • Chino, California, United States
  • Jan 30th
NICE! BUCK ADJUST-TRU? 9" 3 JAW LATHE CHUCK W/ PLAIN BACK MOUNT #2093R

NICE! BUCK ADJUST-TRU? 9" 3 JAW LATHE CHUCK W/ PLAIN BACK MOUNT #2093R

  • Chino, California, United States
  • Jan 30th
NICE! SKINNER 10" 4 JAW LATHE CHUCK W/ 2-1/2-6 THREAD MOUNT #910I

NICE! SKINNER 10" 4 JAW LATHE CHUCK W/ 2-1/2-6 THREAD MOUNT #910I

  • Chino, California, United States
  • Jan 30th
(2) Armstrong 410 Deep Throat Heavy Duty C-Clamp 2"-10" Opening USED TOOL

(2) Armstrong 410 Deep Throat Heavy Duty C-Clamp 2"-10" Opening USED TOOL

  • Cornell, Illinois, United States
  • Jan 30th
(2) Wilton 410 Deep Throat Heavy Duty C-Clamp 1-3/4-10" Opening USED TOOL

(2) Wilton 410 Deep Throat Heavy Duty C-Clamp 1-3/4-10" Opening USED TOOL

  • Cornell, Illinois, United States
  • Jan 30th
HAAG -60-634- Opening 6" Toolmakers Parallel Clamps

HAAG -60-634- Opening 6" Toolmakers Parallel Clamps

  • Flat Rock, Michigan, United States
  • Jan 30th
1" Hex 2J Hardinge Collet

1" Hex 2J Hardinge Collet

  • Brooksville, Florida, United States
  • Jan 30th
3/4" Round 2J Hardinge Collet

3/4" Round 2J Hardinge Collet

  • Brooksville, Florida, United States
  • Jan 30th
1 1/4" Round 2J Hardinge Collet

1 1/4" Round 2J Hardinge Collet

  • Brooksville, Florida, United States
  • Jan 30th
Lot of 4 Holding Fingers

Lot of 4 Holding Fingers

  • Peoria, Illinois, United States
  • Jan 30th
Lot of 4 3-3/4" Fingers

Lot of 4 3-3/4" Fingers

  • Peoria, Illinois, United States
  • Jan 30th
Peterson Tool Company L.X5614.220.00.10 Clamping Jaw

Peterson Tool Company L.X5614.220.00.10 Clamping Jaw

  • Peoria, Illinois, United States
  • Jan 30th
Rare Vintage STANLEY No. 993A Machinist Drill Press Vise w/ TILT Base 3993A

Rare Vintage STANLEY No. 993A Machinist Drill Press Vise w/ TILT Base 3993A

  • Oregonia, Ohio, United States
  • Jan 30th
8 x 4 x 1.5" Standard Steel Machinable Soft Jaws Fits 8" Vises Only (8MJV8415S)

8 x 4 x 1.5" Standard Steel Machinable Soft Jaws Fits 8" Vises Only (8MJV8415S)

  • Placentia, California, United States
  • Jan 30th
8 x 3 x 1.5" Standard Steel Machinable Soft Jaws Fits 8" Vises Only (8MJV8315S)

8 x 3 x 1.5" Standard Steel Machinable Soft Jaws Fits 8" Vises Only (8MJV8315S)

  • Placentia, California, United States
  • Jan 30th
Pnuematic collet closer, 3C, Lexair model 65105

Pnuematic collet closer, 3C, Lexair model 65105

  • Pinellas Park, Florida, United States
  • Feb 13th
USED SANDVIK VARILOCK-50 JACOBS RUBBER FLEX COLLET TAP CHUCK 391.60A-02-50-075A

USED SANDVIK VARILOCK-50 JACOBS RUBBER FLEX COLLET TAP CHUCK 391.60A-02-50-075A

  • Fairfield, Iowa, United States
  • Feb 13th
Rotary Indexer, 4th axis: SMW RT-5C style with collet air chuck

Rotary Indexer, 4th axis: SMW RT-5C style with collet air chuck

  • Pinellas Park, Florida, United States
  • Feb 13th
Brown & Sharpe 10" Rotary Index Table Horizontal

Brown & Sharpe 10" Rotary Index Table Horizontal

  • Middlebury, Indiana, United States
  • Feb 13th
Tsudakoma TP 3-SR12 CNC Control

Tsudakoma TP 3-SR12 CNC Control

  • Chicopee, Massachusetts, United States
  • Feb 13th
NEW! KENNAMETAL 5/8" HYDRAULIC CHUCK TREND LINE w/ CAT40 SHANK

NEW! KENNAMETAL 5/8" HYDRAULIC CHUCK TREND LINE w/ CAT40 SHANK

  • Covina, California, United States
  • Feb 14th
NORTHWESTERN 6-S HEAVY DUTY SERRATED STEEL STEP BLOCKS 3.5 x 5.5 x 1.5

NORTHWESTERN 6-S HEAVY DUTY SERRATED STEEL STEP BLOCKS 3.5 x 5.5 x 1.5

  • Tremont, Illinois, United States
  • Feb 17th
Vintage AD Muehl Matt Maker The Special Machinist Heavy Metal Round Piece Part

Vintage AD Muehl Matt Maker The Special Machinist Heavy Metal Round Piece Part

  • Canadensis, Pennsylvania, United States
  • Feb 17th
20 pc THIN PARALLEL 1/8" x 6" JIG BLOCK BAR TOOL SET MACHINIST MACHINE SHOP

20 pc THIN PARALLEL 1/8" x 6" JIG BLOCK BAR TOOL SET MACHINIST MACHINE SHOP

  • Port Orange, Florida, United States
  • Feb 17th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies