+ Post new Ad
MACHINIST TOOLS * 4 HARDINGE R8 COLLETS, US $240 – Picture 0
MACHINIST TOOLS * 4 HARDINGE R8 COLLETS, US $240 – Picture 1
MACHINIST TOOLS * 4 HARDINGE R8 COLLETS, US $240 – Picture 0
MACHINIST TOOLS * 4 HARDINGE R8 COLLETS, US $240 – Picture 1

Machinist Tools * 4 Hardinge R8 Collets

US $240

  • Camarillo, California, United States
  • Jun 9th
Open on mobile:
QR code
  MACHINIST TOOLS * 8 HARDINGE R8 COLLETS * 3/32, 3/8, 1/2, 5/8,   CONDITION: Normal Wear & Tear, See Photos           Good Working Condition:         Owner markings: NO Cleck Here to Check Out my Ebay Store Please review the shipping charges to make sure you are comfortable with that charge.  If you feel the charge is excessive, then please e-mail before you purchase.  All shipping labels will have the actual cost displayed. If flat rate priority shipping is cheaper than parcel post then that shipping method will be used and most times it is. Should there be a shipping difference of more than $.50 that money will be immediately refund. Please e-mail with questions
“CONDITION: Normal Wear & Tear, See Photos”
Manufacturer HARDINGE
Model R8
Country/Region of Manufacture United States
Additional Information USED, QUANTITY 13, SIZES AS FOLLOWS: , 3/16, 9/32,
Brand HARDINGE

Directions

Similar products from Metalworking Collets

LOT OF 5 HARDINGE 5C COLLETS 5/16" TO 15/16"

LOT OF 5 HARDINGE 5C COLLETS 5/16" TO 15/16"

  • Ellington, New York, United States
  • Jun 9th
HARDINGE 5C-E1 EXTENDED EMERGENCY COLLET 3/4,1/2x.175,1.25x.560 dim

HARDINGE 5C-E1 EXTENDED EMERGENCY COLLET 3/4,1/2x.175,1.25x.560 dim

  • Los Angeles, California, United States
  • Jun 9th
2 HARDINGE 5-C COLLET 3/8 & 5/32 DIAMETER, THREADED

2 HARDINGE 5-C COLLET 3/8 & 5/32 DIAMETER, THREADED

  • Los Angeles, California, United States
  • Jun 9th
ER20 A type Collet Clamping Nut for CNC Milling Collet Chuck Holder Lathe

ER20 A type Collet Clamping Nut for CNC Milling Collet Chuck Holder Lathe

  • shenzhen, China
  • Jun 9th
MACHINIST TOOLS * HARDINGE 9/16 CONE BURR COLLET * 1/4 ROUND

MACHINIST TOOLS * HARDINGE 9/16 CONE BURR COLLET * 1/4 ROUND

  • Camarillo, California, United States
  • Jun 9th
Hardinge 3/16" x 5/16" Rectangular # 5C Collet with Internal Threads "NEW"

Hardinge 3/16" x 5/16" Rectangular # 5C Collet with Internal Threads "NEW"

  • Coventry, Rhode Island, United States
  • Jun 9th
MACHINIST TOOLS * 5C COLLET HEX/SQUARE CHUCK WITH QUICK ACTING CLOSER

MACHINIST TOOLS * 5C COLLET HEX/SQUARE CHUCK WITH QUICK ACTING CLOSER

  • Camarillo, California, United States
  • Jun 9th
Hardinge 31/64" # 5C Collet with Internal Threads Unit # 1

Hardinge 31/64" # 5C Collet with Internal Threads Unit # 1

  • Coventry, Rhode Island, United States
  • Jun 9th
Hardinge 19/32" #5C Collet with internal Threads Unit 4

Hardinge 19/32" #5C Collet with internal Threads Unit 4

  • Coventry, Rhode Island, United States
  • Jun 9th
Hardinge 31/64" # 5C Collet Unit # 2

Hardinge 31/64" # 5C Collet Unit # 2

  • Coventry, Rhode Island, United States
  • Jun 9th
16PCS DA180 COLLETS DA180 SEE SIZES BELOW ALSO HAVE OTHER STYLES LISTED D14151

16PCS DA180 COLLETS DA180 SEE SIZES BELOW ALSO HAVE OTHER STYLES LISTED D14151

  • Dayton, Ohio, United States
  • Jun 9th
5c collet spin jig appears to be USA

5c collet spin jig appears to be USA

  • New Britain, Connecticut, United States
  • Jun 9th
2 NEW LYNDEX R8 5/8" COLLETS STK 5259

2 NEW LYNDEX R8 5/8" COLLETS STK 5259

  • Wadley, Alabama, United States
  • Jun 9th
LOT OF 19 COLLETS R8 HARDINGE & OTHERS BRIDGEPORT SOUTHBEND CLAUSING LATHE

LOT OF 19 COLLETS R8 HARDINGE & OTHERS BRIDGEPORT SOUTHBEND CLAUSING LATHE

  • Southampton, New York, United States
  • Jun 9th
machinist lot x3 collet lyndex 5c and more

machinist lot x3 collet lyndex 5c and more

  • Berlin, Maryland, United States
  • Jun 9th
Lyndex 5c Collets New - "Choose One Size" 7/16",15/32", 21/32", 23/32", 29/32"

Lyndex 5c Collets New - "Choose One Size" 7/16",15/32", 21/32", 23/32", 29/32"

  • Auburn, New York, United States
  • Jun 9th
Hardinge 3/16" x 1/4" Rectangular # 5C Collet

Hardinge 3/16" x 1/4" Rectangular # 5C Collet

  • Coventry, Rhode Island, United States
  • Jun 9th
5c collets

5c collets

  • Waterville, Maine, United States
  • Jun 9th
Hardinge expanding collet pads

Hardinge expanding collet pads

  • North Easton, Massachusetts, United States
  • Jun 9th
New 5C Collets Type: Round Collet Size (Inch): 1-1/8

New 5C Collets Type: Round Collet Size (Inch): 1-1/8

  • MA, United States
  • Jun 9th

People who viewed this item also vieved

Optical Stage 6 in. x 2 1/4 in. (Inv.23482)

Optical Stage 6 in. x 2 1/4 in. (Inv.23482)

  • Portland, Connecticut, United States
  • Jan 30th
Optical Gaging Products Optical Stage with V-Block

Optical Gaging Products Optical Stage with V-Block

  • Portland, Connecticut, United States
  • Jan 30th
Optical Gaging Products 1 in. Horizontal V-Blocks

Optical Gaging Products 1 in. Horizontal V-Blocks

  • Portland, Connecticut, United States
  • Jan 30th
SHARS MT3 LIVE CENTER MORSE TAPER TRIPLE BEARING 3 MT .0002" NEW

SHARS MT3 LIVE CENTER MORSE TAPER TRIPLE BEARING 3 MT .0002" NEW

  • Saint Charles, Illinois, United States
  • Jan 30th
Atlas # 9-88 Dead Center - MT # 2 / MH 172

Atlas # 9-88 Dead Center - MT # 2 / MH 172

  • Seffner, Florida, United States
  • Jan 30th
Precision High Quality 2500 RPM MT2 Morse Taper 2 Live Lathe Center

Precision High Quality 2500 RPM MT2 Morse Taper 2 Live Lathe Center

  • Lakeland, Florida, United States
  • Jan 30th
Z LIVE CENTER 3" 3 Jaw Precision Self Centering Lathe Chuck with 5C Shank

Z LIVE CENTER 3" 3 Jaw Precision Self Centering Lathe Chuck with 5C Shank

  • Diamond Bar, California, United States
  • Jan 30th
TRAUB CNC LATHE SMW KNC S 200 8" HYDRAULIC POWER CHUCK W/ D1-6 CAMLOCK MOUNT

TRAUB CNC LATHE SMW KNC S 200 8" HYDRAULIC POWER CHUCK W/ D1-6 CAMLOCK MOUNT

  • Chino, California, United States
  • Jan 30th
Z LIVE CENTER 3" 3 Jaw Precision Self Centering Lathe Chuck MT3 Shank Tang End

Z LIVE CENTER 3" 3 Jaw Precision Self Centering Lathe Chuck MT3 Shank Tang End

  • Diamond Bar, California, United States
  • Jan 30th
DE-STA-CO 993AL-ACA019-135-97-R1-C1 Pneumatic Clamp, No Arm Or Sensor, Used

DE-STA-CO 993AL-ACA019-135-97-R1-C1 Pneumatic Clamp, No Arm Or Sensor, Used

  • Warren, Michigan, United States
  • Jan 30th
DE-STA-CO 1005B-10-40-R100K-C100K Pneumatic Clamp, With Arm, No Sensor, Used

DE-STA-CO 1005B-10-40-R100K-C100K Pneumatic Clamp, With Arm, No Sensor, Used

  • Warren, Michigan, United States
  • Jan 30th
DE-STA-CO 993AL-ACA033-135-97-R1000-C100 Pneumatic Clamp, No Arm Or Sensor, Used

DE-STA-CO 993AL-ACA033-135-97-R1000-C100 Pneumatic Clamp, No Arm Or Sensor, Used

  • Warren, Michigan, United States
  • Jan 30th
UNIVERSAL ENG SERIES "Z" COLLET CHUCK HOLDER P/N- 55127

UNIVERSAL ENG SERIES "Z" COLLET CHUCK HOLDER P/N- 55127

  • Lubbock, Texas, United States
  • Jan 30th
USED CAT50 PARLEC ER32 COLLET CHUCK C50-32ER412 CAT-50 ER-32 USA

USED CAT50 PARLEC ER32 COLLET CHUCK C50-32ER412 CAT-50 ER-32 USA

  • Fairfield, Iowa, United States
  • Jan 30th
1" Diameter Double End Straight Shank ER20 Collet Chuck Craftsman USA With Flats

1" Diameter Double End Straight Shank ER20 Collet Chuck Craftsman USA With Flats

  • Seminole, Florida, United States
  • Jan 30th
RARE!! NEW HARDINGE G11 PRECISION ANGLE PLATE - 3-1/4" x 1-1/2" x 1-3/4"

RARE!! NEW HARDINGE G11 PRECISION ANGLE PLATE - 3-1/4" x 1-1/2" x 1-3/4"

  • La Puente, California, United States
  • Jan 30th
NOS Busch USA 10"x14"x2.5" DUPLEX GROUND SMOOTH BENCH PLATE #PE1608G LIST $790

NOS Busch USA 10"x14"x2.5" DUPLEX GROUND SMOOTH BENCH PLATE #PE1608G LIST $790

  • Perth, Ontario, Canada
  • Jan 30th
home shop machine project box angle plate casting u finish cast iron tool making

home shop machine project box angle plate casting u finish cast iron tool making

  • Hopatcong, New Jersey, United States
  • Jan 30th
Hytec 100844 Air Advance Work Support,Workholding,7500 lb. Capacity,BNIB,SPX,NEW

Hytec 100844 Air Advance Work Support,Workholding,7500 lb. Capacity,BNIB,SPX,NEW

  • Palatine, Illinois, United States
  • Jan 30th
TTC Precision Parallel Set - Matched Pairs - MODEL: PPQ-124 THICKNESS : 1/2"

TTC Precision Parallel Set - Matched Pairs - MODEL: PPQ-124 THICKNESS : 1/2"

  • Flushing, New York, United States
  • Jan 30th
TTC Precision Parallel Set - Matched Pairs - MODEL: PPQ-36 THICKNESS : 3/16"

TTC Precision Parallel Set - Matched Pairs - MODEL: PPQ-36 THICKNESS : 3/16"

  • Flushing, New York, United States
  • Jan 30th
OGP HPR2000 High Precision Rotary Indexer Programmable 360* Rotation HPR-2000

OGP HPR2000 High Precision Rotary Indexer Programmable 360* Rotation HPR-2000

  • Indianapolis, Indiana, United States
  • Jan 30th
Haas HA5C CNC 4th Axis Indexer Rotary Table 5C Collet Closer Brush White 17

Haas HA5C CNC 4th Axis Indexer Rotary Table 5C Collet Closer Brush White 17

  • Schaumburg, Illinois, United States
  • Jan 30th
nikken cnc 400V rotary table 4th 5th axis

nikken cnc 400V rotary table 4th 5th axis

  • Olney, Texas, United States
  • Jan 30th
Enco Cast Aluminum Vise Stop 209-9007

Enco Cast Aluminum Vise Stop 209-9007

  • Elmhurst, Illinois, United States
  • Jan 30th
Dayton Metal 8" Sliding Vise Press

Dayton Metal 8" Sliding Vise Press

  • Ventura, California, United States
  • Jan 30th
Colbert Industries PanaVise PanaPress

Colbert Industries PanaVise PanaPress

  • Ventura, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies