+ Post new Ad
MACHINIST TOOLS * RETENTION KNOBS * CAT 50 * C50-6000 H * 18, US $290 – Picture 0
MACHINIST TOOLS * RETENTION KNOBS * CAT 50 * C50-6000 H * 18, US $290 – Picture 0

Machinist Tools * Retention Knobs * Cat 50 * C50-6000 H * 18

US $290

  • Camarillo, California, United States
  • May 28th
Open on mobile:
QR code
MACHINIST TOOLS * RETENTION KNOBS * CAT 50 * C50-6000 H * 18   CONDITION: Normal Wear & Tear, See Photos   Good Working Condition: SOME ARE NEW MOST ARE USED.  2 ARE NOT COOLANT THROUGH   Part Number (SKU) C50-6000(H) D 0.9 d1 -- d2 0.393 L1 1.386 L2 1.78 Angle 60 W 0.39 Thread 1 O-RING -- Max. Torque 110ft.lbs Category Retention Studs Style JIS Style Knob Coolant-Thru Yes Owner markings: NO   Click Here to Check Out my Ebay Store   Please review the shipping charges to make sure you are comfortable with that charge.  If you feel the charge is excessive, then please e-mail before you purchase / bid.   I do not charge a handling fee so you will only be charged for actual shipping   Should there be a shipping difference of more than $.50 that money will be immediately refund.   Please e-mail with questions       

Directions

Similar products from BT Tool Holders

GS BT 40 1/4" Integral Shank High Precision Keyless CNC Drill Chuck

GS BT 40 1/4" Integral Shank High Precision Keyless CNC Drill Chuck

  • Hamden, Connecticut, United States
  • May 29th
GS NMTB 40 1/2" Integral Shank High Precision Keyless CNC Drill Chuck

GS NMTB 40 1/2" Integral Shank High Precision Keyless CNC Drill Chuck

  • Hamden, Connecticut, United States
  • May 29th
GS 3/4" Straight Integral Shank 1/4" High Precision Keyless CNC Drill Chuck

GS 3/4" Straight Integral Shank 1/4" High Precision Keyless CNC Drill Chuck

  • Hamden, Connecticut, United States
  • May 29th
GS 1-1/4" Straight Shank 1/2" High Precision Integral Keyless CNC Drill Chuck

GS 1-1/4" Straight Shank 1/2" High Precision Integral Keyless CNC Drill Chuck

  • Hamden, Connecticut, United States
  • May 29th
ZLIVECENTER BT30 ER32 MILLING COLLET CHUCK HOLDER PROJ. 3.94" BALANCE 25,000RPM

ZLIVECENTER BT30 ER32 MILLING COLLET CHUCK HOLDER PROJ. 3.94" BALANCE 25,000RPM

  • Diamond Bar, California, United States
  • May 29th
ZLIVECENTER BT50 ER25 MILLING COLLET CHUCK HOLDER PROJ. 5.91" BAL 12,000RPM

ZLIVECENTER BT50 ER25 MILLING COLLET CHUCK HOLDER PROJ. 5.91" BAL 12,000RPM

  • Diamond Bar, California, United States
  • May 29th
Armstrong No.T- 2-L Lathe Bit Tool-Holder Machinist

Armstrong No.T- 2-L Lathe Bit Tool-Holder Machinist

  • McKeesport, Pennsylvania, United States
  • May 29th
KENNAMETAL BT40 1/2" END MILL HOLDER 2-1/2" PROJECTION STK 6826

KENNAMETAL BT40 1/2" END MILL HOLDER 2-1/2" PROJECTION STK 6826

  • Wadley, Alabama, United States
  • May 28th
KENNAMETAL BT40 TG100 COLLET CHUCK 3" PROJECTION STK 6841

KENNAMETAL BT40 TG100 COLLET CHUCK 3" PROJECTION STK 6841

  • Wadley, Alabama, United States
  • May 28th
R8 1-1/2" Shell Endmill Arbor, Pilot Diameter 1-1/2", Size Range 4" - 5", NOS

R8 1-1/2" Shell Endmill Arbor, Pilot Diameter 1-1/2", Size Range 4" - 5", NOS

  • Attleboro, Massachusetts, United States
  • May 28th
NOS AMERICAN SUN USA BT 30 BT30 5/8" END MILL HOLDER 4 Milling Mill B30E625 M7B

NOS AMERICAN SUN USA BT 30 BT30 5/8" END MILL HOLDER 4 Milling Mill B30E625 M7B

  • Perth, Ontario, Canada
  • May 28th
NOS AMERICAN SUN USA BT 30 BT30 1/2" END MILL HOLDER 4 Milling Mill B30E500 M7B

NOS AMERICAN SUN USA BT 30 BT30 1/2" END MILL HOLDER 4 Milling Mill B30E500 M7B

  • Perth, Ontario, Canada
  • May 28th
Lot of Four NIkken BT40 Tool Holders BT40-WE1/2-65 (Inv.35586)

Lot of Four NIkken BT40 Tool Holders BT40-WE1/2-65 (Inv.35586)

  • Portland, Connecticut, United States
  • May 28th
Lot of Four NIkken BT40 Tool Holders Lyndex, Others 1/2 Inch (Inv.35587)

Lot of Four NIkken BT40 Tool Holders Lyndex, Others 1/2 Inch (Inv.35587)

  • Portland, Connecticut, United States
  • May 28th
Lot of Four NIkken BT40 Tool Holders 3/8 Inch (Inv.35588)

Lot of Four NIkken BT40 Tool Holders 3/8 Inch (Inv.35588)

  • Portland, Connecticut, United States
  • May 28th
PARLEC BT 40 3/8" END MILL HOLDER 2" PROJECTION STK 9287

PARLEC BT 40 3/8" END MILL HOLDER 2" PROJECTION STK 9287

  • Wadley, Alabama, United States
  • May 28th
ISCAR BT 40 ITS-BORE HOLDER BT40-MB50 STK 9288

ISCAR BT 40 ITS-BORE HOLDER BT40-MB50 STK 9288

  • Wadley, Alabama, United States
  • May 28th
Lot of Four BT40 Tool Holders (Inv.35589)

Lot of Four BT40 Tool Holders (Inv.35589)

  • Portland, Connecticut, United States
  • May 28th
Lot of Four BT40 Tool Holders Sandvik Command and Nikken (Inv.35590)

Lot of Four BT40 Tool Holders Sandvik Command and Nikken (Inv.35590)

  • Portland, Connecticut, United States
  • May 28th
Lot of Four BT40 Tool Holders (Inv.35592)

Lot of Four BT40 Tool Holders (Inv.35592)

  • Portland, Connecticut, United States
  • May 28th

People who viewed this item also vieved

TM Smith 3712-SS Adapter Spindle

TM Smith 3712-SS Adapter Spindle

  • Peoria, Illinois, United States
  • Jan 30th
Albrecht 70583 Precision Arbor Adapter, 3/8" Straight Shank X Jacobs Taper #1

Albrecht 70583 Precision Arbor Adapter, 3/8" Straight Shank X Jacobs Taper #1

  • United States
  • Jan 30th
Valenite Vari-set Boring Bar

Valenite Vari-set Boring Bar

  • Norwood, New Jersey, United States
  • Jan 30th
MICRO PRECISION BORING HEAD 3 MORSE TAPER 3MT SHANK 1/2" TOOL CAPACITY

MICRO PRECISION BORING HEAD 3 MORSE TAPER 3MT SHANK 1/2" TOOL CAPACITY

  • Jamestown, New York, United States
  • Jan 30th
Lamina LAC 125 S Bushing 1-1/4" Bore x 3-1/2" Length

Lamina LAC 125 S Bushing 1-1/4" Bore x 3-1/2" Length

  • Huntsville, Alabama, United States
  • Jan 30th
LOT 2 NEW MARTIN 2012 1-1/2 TAPER LOCK BUSHING 1-1/2IN BORE D391668

LOT 2 NEW MARTIN 2012 1-1/2 TAPER LOCK BUSHING 1-1/2IN BORE D391668

  • Delta, Ohio, United States
  • Jan 30th
Mazak Retention Knob / Pull Stud, Coolant Thru, # SP-1267, Used, WARRANTY

Mazak Retention Knob / Pull Stud, Coolant Thru, # SP-1267, Used, WARRANTY

  • Grand Rapids, Michigan, United States
  • Jan 30th
Generic Retention Knob / Pull Stud, Coolant Thru, # RK31246, Used, WARRANTY

Generic Retention Knob / Pull Stud, Coolant Thru, # RK31246, Used, WARRANTY

  • Grand Rapids, Michigan, United States
  • Jan 30th
ALBRECHT GERMANY KEYLESS DRILL CHUCK 0-3/8" CAPACITY W/ 1" SHANK

ALBRECHT GERMANY KEYLESS DRILL CHUCK 0-3/8" CAPACITY W/ 1" SHANK

  • Ellington, New York, United States
  • Jan 30th
ALBRECHT GERMANY KEYLESS DRILL CHUCK 0-3/8" CAPACITY W/ 1/2" SHANK

ALBRECHT GERMANY KEYLESS DRILL CHUCK 0-3/8" CAPACITY W/ 1/2" SHANK

  • Ellington, New York, United States
  • Jan 30th
WALTER 3.0" INSERT MILL

WALTER 3.0" INSERT MILL

  • Johnson City, New York, United States
  • Jan 30th
Iscar Mahr 25.4 grooving holder and blade

Iscar Mahr 25.4 grooving holder and blade

  • Niagara Falls, New York, United States
  • Jan 30th
Carboloy Quick Change Tap Chuck Holder Bilz 2 SS1000-TH4.40-0100 1" Shank (5)

Carboloy Quick Change Tap Chuck Holder Bilz 2 SS1000-TH4.40-0100 1" Shank (5)

  • Glasgow, Kentucky, United States
  • Jan 30th
Carboloy Quick Change Tap Chuck Holder Bilz 2 SS1000-TH4.40-0100 1" Shank (4)

Carboloy Quick Change Tap Chuck Holder Bilz 2 SS1000-TH4.40-0100 1" Shank (4)

  • Glasgow, Kentucky, United States
  • Jan 30th
10PC SET KWIK-SWITCH 200 COLLET CHUCK W/ 9 "ZZ" SERIES COLLETS GREAT COND C11386

10PC SET KWIK-SWITCH 200 COLLET CHUCK W/ 9 "ZZ" SERIES COLLETS GREAT COND C11386

  • Dayton, Ohio, United States
  • Feb 15th
DA200 KWIK-SWITCH 200 COLLET CHUCK W/ 11 DA200 COLLETS DA 200 GREAT COND C11375

DA200 KWIK-SWITCH 200 COLLET CHUCK W/ 11 DA200 COLLETS DA 200 GREAT COND C11375

  • Dayton, Ohio, United States
  • Feb 15th
Index Live Tooling XL90650.0100

Index Live Tooling XL90650.0100

  • East Amherst, New York, United States
  • Apr 25th
High Quality Tools Model 2000 Right Angle Head

High Quality Tools Model 2000 Right Angle Head

  • Memphis, Tennessee, United States
  • Apr 26th
Expending Mandrel

Expending Mandrel

  • Lombard, Illinois, United States
  • May 3rd
SUPERIOR HONING MANDREL HOLDER W/ 3MT SHANK + HONE

SUPERIOR HONING MANDREL HOLDER W/ 3MT SHANK + HONE

  • Ellington, New York, United States
  • May 4th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies