+ Post new Ad
Machinist Tools Tool Precision Vee Block Pair Custom Made rare size., US $275.00 – Picture 0
Machinist Tools Tool Precision Vee Block Pair Custom Made rare size., US $275.00 – Picture 1
Machinist Tools Tool Precision Vee Block Pair Custom Made rare size., US $275.00 – Picture 0
Machinist Tools Tool Precision Vee Block Pair Custom Made rare size., US $275.00 – Picture 1

Machinist Tools Tool Precision Vee Block Pair Custom Made Rare Size.

US $275.00

  • British Columbia, Canada
  • Jan 30th
Open on mobile:
QR code
One only pair of custom made Machinist precision Vee Blocks. Hardened and ground, clamp is 9/16" NF screw, much larger than most blocks this size. Block dimensions are 2 15/16" long x 1 3/4" wide x 1 7/8" high. Minor rust spots from just sitting and not being used. 6" scale is in photo for sizing only and does not go with the item. Large vee will hold 1 1/4" diameter part which is very large for this type of block. You will not find another pair of Vee blocks like this anywhere. They were custom made for a certain application and never used. Great Vee blocks for the money!
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Country/Region of Manufacture Canada

Directions

Similar products from Supporting Blocks & Sets

MACHINIST LATHE MILL Lot of Machinist Clamps Steel Stamps Cutters Blocks Etc

MACHINIST LATHE MILL Lot of Machinist Clamps Steel Stamps Cutters Blocks Etc

  • Morris Plains, New Jersey, United States
  • Jan 30th
MACHINIST LATHE MILL Lot of Machinist Ball Bearings Chucks Live Centers Etc

MACHINIST LATHE MILL Lot of Machinist Ball Bearings Chucks Live Centers Etc

  • Morris Plains, New Jersey, United States
  • Jan 30th
2 MACHINIST HANGDA V BLOCKS WITH CLAMPS IN WOODEN CASE 2 1/4" X 2 1/4" X 2"

2 MACHINIST HANGDA V BLOCKS WITH CLAMPS IN WOODEN CASE 2 1/4" X 2 1/4" X 2"

  • Naperville, Illinois, United States
  • Jan 30th
2 SETS OF MACHINIST HANGDA V BLOCKS WITH CLAMPS IN WOODEN CASE

2 SETS OF MACHINIST HANGDA V BLOCKS WITH CLAMPS IN WOODEN CASE

  • Naperville, Illinois, United States
  • Jan 30th
6" CAPACITY HEAVY DUTY V BLOCK / ANGLE PLATE 8-3/8" x 9-1/8" x 10"

6" CAPACITY HEAVY DUTY V BLOCK / ANGLE PLATE 8-3/8" x 9-1/8" x 10"

  • La Puente, California, United States
  • Jan 30th
3-3/4" CAPACITY MACHINIST V BLOCK 7" x 3" x 4.5"

3-3/4" CAPACITY MACHINIST V BLOCK 7" x 3" x 4.5"

  • La Puente, California, United States
  • Jan 30th
ERON UR8 6" x 8" x 6" x 1-1/4" THICK DRILL PRESS ANGLE PLATE

ERON UR8 6" x 8" x 6" x 1-1/4" THICK DRILL PRESS ANGLE PLATE

  • La Puente, California, United States
  • Jan 30th
Machinists 12/6A BUY NOW Iconic USA Starrett 154B Adjustable parallel

Machinists 12/6A BUY NOW Iconic USA Starrett 154B Adjustable parallel

  • Lutz, Florida, United States
  • Jan 30th
Machinists 12/6A BUY NOW Unused Spider for machinists and Gunsmiths

Machinists 12/6A BUY NOW Unused Spider for machinists and Gunsmiths

  • Lutz, Florida, United States
  • Jan 30th
SPi 98-410-4 4 6" Pairs 1" - 1-3/4" Parallel Set w/Case ** EXCELLENT **

SPi 98-410-4 4 6" Pairs 1" - 1-3/4" Parallel Set w/Case ** EXCELLENT **

  • Adkins, Texas, United States
  • Jan 30th
KURT BRENDEL CLAMP WORKHOLDING PRECISION PRISM WORK HOLDER V-BLOCK MACHINE TOOL

KURT BRENDEL CLAMP WORKHOLDING PRECISION PRISM WORK HOLDER V-BLOCK MACHINE TOOL

  • Aurora, Ohio, United States
  • Jan 30th
MACHINIST TOOLS LATHE MILL Starrett #129 Bench Block for Set Up Hold Down SAV

MACHINIST TOOLS LATHE MILL Starrett #129 Bench Block for Set Up Hold Down SAV

  • Morris Plains, New Jersey, United States
  • Jan 30th
IMPORT 285-2060 1-7/8 x 2-3/8 x 2" Aluminum 90 Degree V Block Set 1R

IMPORT 285-2060 1-7/8 x 2-3/8 x 2" Aluminum 90 Degree V Block Set 1R

  • Saint Louis, Missouri, United States
  • Jan 30th
MACHINIST LATHE MILL STARRETT # 567 V Block and Clamp in Box

MACHINIST LATHE MILL STARRETT # 567 V Block and Clamp in Box

  • Morris Plains, New Jersey, United States
  • Jan 30th
Starrett 119 Alloy Steel Bench Block, 4-7/8" Diameter, 1-1/2" Size

Starrett 119 Alloy Steel Bench Block, 4-7/8" Diameter, 1-1/2" Size

  • Lake Zurich, Illinois, United States
  • Jan 30th
1/8 X 4 INCH 10 PAIR PRECISION PARALLEL SET (3900-3002)

1/8 X 4 INCH 10 PAIR PRECISION PARALLEL SET (3900-3002)

  • Chino, California, United States
  • Jan 30th
4 SMALL 3/8" X 3/8" X2-1/4" ARBOR PRESS PLATES, ANVIL WHEEL BARS, 1/2 to 1 TON

4 SMALL 3/8" X 3/8" X2-1/4" ARBOR PRESS PLATES, ANVIL WHEEL BARS, 1/2 to 1 TON

  • Victor, New York, United States
  • Jan 30th
4 SMALL 1/2" X 1/2" X 2-1/4" Arbor PRESS PLATES, Anvil Wheel Bars Blocks, 2 Ton

4 SMALL 1/2" X 1/2" X 2-1/4" Arbor PRESS PLATES, Anvil Wheel Bars Blocks, 2 Ton

  • Victor, New York, United States
  • Jan 30th
10" x 27" Steel Set-Up Blocks Pair

10" x 27" Steel Set-Up Blocks Pair

  • Euclid, Ohio, United States
  • Jan 30th
PRECISION MACHINIST MAGNETIC CHUCK UNIVERSAL V-BLOCK

PRECISION MACHINIST MAGNETIC CHUCK UNIVERSAL V-BLOCK

  • Jamestown, New York, United States
  • Jan 30th

People who viewed this item also vieved

22" MAGNETIC BLOCK

22" MAGNETIC BLOCK

  • California, United States
  • Jun 4th
LOT OF ARMSTRONG & OTHER HOLD DOWNS

LOT OF ARMSTRONG & OTHER HOLD DOWNS

  • California, United States
  • Jun 4th
NICE LOT OF J & S & OTHER 4 & 6 " ADJUSTABLE HEEL CLAMPS

NICE LOT OF J & S & OTHER 4 & 6 " ADJUSTABLE HEEL CLAMPS

  • California, United States
  • Jun 4th
Skoda #5 Morse Taper Live Center 5-CSN243324

Skoda #5 Morse Taper Live Center 5-CSN243324

  • Johnson City, New York, United States
  • Jun 4th
DESMOND Huntington Type Dresser Capacity: 16'' to 36'' Model #: 2 Face: 1-1/2''

DESMOND Huntington Type Dresser Capacity: 16'' to 36'' Model #: 2 Face: 1-1/2''

  • Duncan, South Carolina, United States
  • Jun 4th
CENTER SQUARE : 3"

CENTER SQUARE : 3"

  • DELHI, DELHI, India
  • Jun 4th
MITEE BITE KIT 10275 MILL TOOLING

MITEE BITE KIT 10275 MILL TOOLING

  • Shelby, North Carolina, United States
  • Jun 7th
MITEE-BITE PRODUCTS INC 52424 Advant-Edge Clamp Kit, Cam Action Toe

MITEE-BITE PRODUCTS INC 52424 Advant-Edge Clamp Kit, Cam Action Toe

  • Shelby, North Carolina, United States
  • Jun 7th
Lot of 2 Brown & Sharpe 754 Parallel clamps machinist toolmaker tools

Lot of 2 Brown & Sharpe 754 Parallel clamps machinist toolmaker tools

  • Edison, New Jersey, United States
  • Jun 7th
HARDINGE 3J 1-1/8" ROUND COLLET NO INTERNAL THREADS STK 8359

HARDINGE 3J 1-1/8" ROUND COLLET NO INTERNAL THREADS STK 8359

  • Wadley, Alabama, United States
  • Jun 7th
1 pc OF THE 2 PICTURED NEW REWDALE & CENTAUR TG100 25/64" COLLETS CNC TOOLING

1 pc OF THE 2 PICTURED NEW REWDALE & CENTAUR TG100 25/64" COLLETS CNC TOOLING

  • Xenia, Ohio, United States
  • Jun 7th
1 pc OF THE 7 PICTURED NEW REWDALE & LYNDEX TG100 31/32" COLLETS CNC TOOLING

1 pc OF THE 7 PICTURED NEW REWDALE & LYNDEX TG100 31/32" COLLETS CNC TOOLING

  • Xenia, Ohio, United States
  • Jun 7th
PBA 614420 6' 4 JAW D-3 INDEPENDENT LATHE CHUCK

PBA 614420 6' 4 JAW D-3 INDEPENDENT LATHE CHUCK

  • Duncan, South Carolina, United States
  • Jun 8th
PBA 623500 6' 3 JAW PLAIN BACK SCROLL CHUCK

PBA 623500 6' 3 JAW PLAIN BACK SCROLL CHUCK

  • Duncan, South Carolina, United States
  • Jun 8th
PBA 523500 5' 3 JAW PLAIN BACK SCROLL CHUCK

PBA 523500 5' 3 JAW PLAIN BACK SCROLL CHUCK

  • Duncan, South Carolina, United States
  • Jun 8th
NEW 2 PC Quick Clamp Mill Vise 8" Jaw Width

NEW 2 PC Quick Clamp Mill Vise 8" Jaw Width

  • Columbus, Ohio, United States
  • Jun 9th
Lassy Rapid-Lox 5" Drill Press Speed Vise w/ Bearing Slide Rail 5R-SLV

Lassy Rapid-Lox 5" Drill Press Speed Vise w/ Bearing Slide Rail 5R-SLV

  • Lorain, Ohio, United States
  • Jun 9th
Panavise Model 308

Panavise Model 308

  • Mount Olive, West Virginia, United States
  • Jun 9th
"Nova Platina Straight Needles Set 10""-"

"Nova Platina Straight Needles Set 10""-"

  • Hickory Hills, Illinois, United States
  • Jun 23rd
"Winter Chickadee Basket Counted Cross Stitch Kit-11""X9.25"" 14 Count"

"Winter Chickadee Basket Counted Cross Stitch Kit-11""X9.25"" 14 Count"

  • Hickory Hills, Illinois, United States
  • Jun 23rd
Handmade Collection Owl Crewel Embroidery Kit-10"X10" Stitched In Wool & Yarn

Handmade Collection Owl Crewel Embroidery Kit-10"X10" Stitched In Wool & Yarn

  • Hickory Hills, Illinois, United States
  • Jun 23rd
5" Inches(125 mm) 4 Jaw Independent Chuck for Lathe Machine & HV6 Rotary Table

5" Inches(125 mm) 4 Jaw Independent Chuck for Lathe Machine & HV6 Rotary Table

  • New Delhi, Delhi, India
  • Nov 2nd
FIBRO rotary table FIBROTOR EM.NC.03.0320.1.111.00.0.00

FIBRO rotary table FIBROTOR EM.NC.03.0320.1.111.00.0.00

  • Athens, Pireus, Greece
  • Nov 2nd
Tsudakoma 4th Axis Rotary Table RNCV-201R2

Tsudakoma 4th Axis Rotary Table RNCV-201R2

  • Suwanee, Georgia, United States
  • Nov 2nd
BROWN & SHARPE ADJUSTABLE PARALLEL SET 599-673-20

BROWN & SHARPE ADJUSTABLE PARALLEL SET 599-673-20

  • Buffalo, New York, United States
  • Nov 8th
Starrett S190 Jack Screw

Starrett S190 Jack Screw

  • Colorado Springs, Colorado, United States
  • Nov 8th
Starrett 190A Jack Screw

Starrett 190A Jack Screw

  • Colorado Springs, Colorado, United States
  • Nov 8th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies