US $430
Condition: |
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully
operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
...
|
Manufacturer | Brown & Sharpe |
Brand | Brown & Sharpe |
Directions
Similar products from Supporting Blocks & Sets
Machinist 3 Pairs Of Parallels Hardened Ground Tool Maker Made.
Magnetic Transfer Machinst V Block marked
Vintage Pair of Dial Indicator Snug Clamps 5/16" X 1/4" - 5/16" X 1/8"
Ultra Thin Precision Parallel Set
GENERAL HDW Precision Machinist Vee block Vise Clamps No. 116
Vintage V - Block Hardened & Ground / Clamp Tool Maker Made
Vintage Machinist V- Block Tool Maker Made / No Clamp
STARRETT TOOLMAKERS V-BLOCK No. 567 USA Great condition
2 MACHINIST V BLOCKS WITH CLAMPS IN WOODEN CASE 4" x 4" x 3""
Hardened Precision Ground Parallels 1.717 x .998 x 7 inch Toolmaker Made in USA
VINTAGE Montgomery & Co Tool BALL BEARING No. 1 PARALLEL 4 pc SET Org Wood Box
Machinist Brown Sharpe Lathe Mill V Blocks-Clamps Rare #32 Original Box-750A
Lot of 6 Odd Different Machinist Blocks / Tools VGC - Old Vintage Tools -
MACHINIST'S TOOLMAKER'S JEWELER'S PRECISION ANGLE WORK BLOCK KNEE
GREAT GENERAL NO. 435-B 24 PC. RADIUS GAGE SET W/CASE ~ 1/32" TO 1/2" USA L@@K
MACHINIST LATHE MILL 2 Heavy Parallel Hold Down Blocks GEORGE SCHERR CO. INC NY
MACHINIST'S STARRETT #568 UNIVERSAL V BLOCK WITH CLAMP **EXCELLENT CONDITION**
MACHINIST'S BROWN & SHARPE #599- 752 TOOLMAKER'S VISE CLAMP
People who viewed this item also vieved
LOT of (21) ASSORTED 5C COLLETS / NEAL SKOKIE, R-S-B, SUTTON, PRECISION, FOWLER,
LOT of (6) ASSORTED 5C STEP EMERGENCY COLLETS, 2-3/8" OUTSIDE DIAMETER
Kennametal Erickson Collet .688 Diameter LTCO5OP
Vacuum table chuck plate 4.75" x 4.74" porous brass
57.5" x 16.25" Steel Welding T-Slot Table Cast iron Layout Plate T-Slot Weld Jig
59.5" x 14" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot Weld Jig
Vintage Unbranded 6" Bit / Clamp Holder
Vintage Williams 20-R Agrippa 5-1/4" Bit / Clamp Holder
Carr Lane Locking Clamp Aircraft Tools Aviation Locking Pliers 6"
PALMGREN Drill Press Vise Hinged Opens90+ Jaw Width - 2-7/16" Jaw Opening - 3"
PIPE VISE BENCH MOUNT HOLLANDS MFG CO ERIE PA #398
SWIVEL BASE - MACHINIST MILLING/LATHE/VISE
HARDINGE 16C - 5C COLLET ADAPTER FRONT PLATE CNC LATHE
CNC LATHE 6" POWER CHUCK A-4 MOUNT
New Jacobs Brand Drill Chuck Key K0 0 Series BI005-1 WE HAVE OTHERS
Machine tool tail stock 10" approx. swing unused
Used Lot Of (2) Steel Morse Taper #2, 3.30 & 3.90 Overall Length, Dead Center
Reiner Industries PRD-10 & PRI-10 Welding Pipe Rolls
MAUDLIN PRODUCTS Slotted Shims Set Length: 2" Slot: 5/8" Width: 2" Series: 300
Indexing plunger without rest position IP-0607-M16x1.5-8-8-AK-NI
Dremel 3000-1/24 Variable Speed Tool Kit
Camco 902RDM0H32-360 Industrial Rotary Index Drive Assembly w/Parker 610 Motor 2
#Rt400G WALTER (Germany) 15-3/4" Diameter Horizontal Rotary Table
Nikken HSK63A-C1 1/4-110P, HSK63A Milling Chuck.
Used Nikken HSK63A-C23-110P, HSK63A Milling Chuck.
Nikken HSK63A-C23-110P, HSK63A Milling Chuck.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies