+ Post new Ad
MACHINISTS TOOLS COMBINATION SQUARE AND BLADES, US $280 – Picture 0
MACHINISTS TOOLS COMBINATION SQUARE AND BLADES, US $280 – Picture 0

Machinists Tools Combination Square And Blades

US $280

  • Aurora, Illinois, United States
  • May 29th
Open on mobile:
QR code
UP FOR BIDDING IS 18" BROWN & SHARPE COMBINATION SQUARE WITH A LUFKIN PROTRACTOR. BLADE HAS SOME STAINING ON IT BUT STILL READABLE. THE 12" HARDENED BLADE IS A STARRETT THAT READS IN MILLMETERS AND 32" & 64" INCHES WITH A CENTERING HEAD..NO.36 GARD.

Directions

Similar products from Supporting Blocks & Sets

Assorted Turret Tools

Assorted Turret Tools

  • Plainville, Connecticut, United States
  • May 29th
Starrett No. 54 Hold Down 6" qty 1

Starrett No. 54 Hold Down 6" qty 1

  • Niles, Michigan, United States
  • May 29th
2 Vintage Little Machinist Vises 1 1/4" x 1 1/8" Square

2 Vintage Little Machinist Vises 1 1/4" x 1 1/8" Square

  • Mifflinburg, Pennsylvania, United States
  • May 29th
V-Block & Clamp Set, 2.5" x 2.5" x 2 x 1-3/8 Cap, 420-5611 |JC2|

V-Block & Clamp Set, 2.5" x 2.5" x 2 x 1-3/8 Cap, 420-5611 |JC2|

  • Saint Louis, Missouri, United States
  • May 29th
ROTATOR VICE PIECE WAS WITH VEE BLOCKS WITH READINGS AROUND BASE

ROTATOR VICE PIECE WAS WITH VEE BLOCKS WITH READINGS AROUND BASE

  • Walcott, Iowa, United States
  • May 29th
MACHINIST 123" THREAED PRECISION PARALLEL MILLING BLOCKS(2)

MACHINIST 123" THREAED PRECISION PARALLEL MILLING BLOCKS(2)

  • Holland, Michigan, United States
  • May 29th
Machinist Right Angle Set up Block, L Block, Boring Block, Machinist Tool

Machinist Right Angle Set up Block, L Block, Boring Block, Machinist Tool

  • Valparaiso, Indiana, United States
  • May 29th
Lot 3 Machinist set of V Blocks & Milling Tapped Holes Flat surface plate block

Lot 3 Machinist set of V Blocks & Milling Tapped Holes Flat surface plate block

  • Shrewsbury, Massachusetts, United States
  • May 29th
12" Steel V-Block Matched Pairs Ground Precision

12" Steel V-Block Matched Pairs Ground Precision

  • Norwalk, California, United States
  • May 29th
Brown & Sharpe No.750D Magnetic V-Block

Brown & Sharpe No.750D Magnetic V-Block

  • Chalfont, Pennsylvania, United States
  • May 29th
Brown Sharpe 750 A Two V blocks 1 clamp 750 A

Brown Sharpe 750 A Two V blocks 1 clamp 750 A

  • Kalamazoo, Michigan, United States
  • May 29th
FLEXBAR BALL BEARING V BLOCKS 2 1/4" X 7/8 " THICK NO 16093 IN BOX

FLEXBAR BALL BEARING V BLOCKS 2 1/4" X 7/8 " THICK NO 16093 IN BOX

  • Landenberg, Pennsylvania, United States
  • May 29th
Set of Moore & Wright England Brand Model #502 V-Blocks & Clamp in Box

Set of Moore & Wright England Brand Model #502 V-Blocks & Clamp in Box

  • Rio Rancho, New Mexico, United States
  • May 29th
TE-CO STEP BLOCKS 2-1/2" MINIMUM 6" MAX STK4545

TE-CO STEP BLOCKS 2-1/2" MINIMUM 6" MAX STK4545

  • Wadley, Alabama, United States
  • May 29th
PAIR OF HEAVY DUTY HOLD DOWN STEP BLOCKS 1-3/4" x 6" x 4-1/4"

PAIR OF HEAVY DUTY HOLD DOWN STEP BLOCKS 1-3/4" x 6" x 4-1/4"

  • Chino, California, United States
  • May 29th
machinist Lot Lathe Mill tools/ Empire Tool Co Toolmaker, Bits

machinist Lot Lathe Mill tools/ Empire Tool Co Toolmaker, Bits

  • Menifee, California, United States
  • May 29th
FAMOS NO NAME MACHINIST V BLOCK 3 X 2-3-4 X 2-3/4" TOOL DIE NICE CLEAN SHOP MADE

FAMOS NO NAME MACHINIST V BLOCK 3 X 2-3-4 X 2-3/4" TOOL DIE NICE CLEAN SHOP MADE

  • Macomb, Michigan, United States
  • May 29th
Pair of V-Blocks with clamps & extra clamp screws

Pair of V-Blocks with clamps & extra clamp screws

  • Utica, Michigan, United States
  • May 29th
THREE SETS OF 6" MACHINIST PARALLELS

THREE SETS OF 6" MACHINIST PARALLELS

  • Newbury, Ohio, United States
  • May 29th
MILLING CORNER BLOCK - 5" BY 2"

MILLING CORNER BLOCK - 5" BY 2"

  • Newbury, Ohio, United States
  • May 29th

People who viewed this item also vieved

6 PC KENT & OTHER BRAND 5C 5 C COLLETS 15/64" TO 63/64" SIZE RANGE

6 PC KENT & OTHER BRAND 5C 5 C COLLETS 15/64" TO 63/64" SIZE RANGE

  • La Puente, California, United States
  • Jan 30th
REGO-FIX SERIES 25, TAP COLLET ER 25-GB .194"

REGO-FIX SERIES 25, TAP COLLET ER 25-GB .194"

  • Caledonia, Wisconsin, United States
  • Jan 30th
REGO-FIX SERIES 25, TAP COLLET ER 25-GB .165"

REGO-FIX SERIES 25, TAP COLLET ER 25-GB .165"

  • Caledonia, Wisconsin, United States
  • Jan 30th
HEAVY DUTY 10" x 15" TILTING MILLING TABLE

HEAVY DUTY 10" x 15" TILTING MILLING TABLE

  • La Puente, California, United States
  • Feb 13th
10" SINE BAR Hardened & ground V. GOOD CONDITION

10" SINE BAR Hardened & ground V. GOOD CONDITION

  • Bristol, Connecticut, United States
  • Feb 13th
Interstate 7" x 10" Tilting Table - Excellent Condition!

Interstate 7" x 10" Tilting Table - Excellent Condition!

  • Bellingham, Washington, United States
  • Feb 13th
DORIAN D25AXA-2 Tool Holder, Turning/Facing/Boring, AXA

DORIAN D25AXA-2 Tool Holder, Turning/Facing/Boring, AXA

  • Helenville, Wisconsin, United States
  • Feb 14th
Destaco Model No 486 Squeeze Action Clamp

Destaco Model No 486 Squeeze Action Clamp

  • Lyndhurst, New Jersey, United States
  • Feb 14th
Vintage Pair Of Parallel Clamps Tool Maker Made

Vintage Pair Of Parallel Clamps Tool Maker Made

  • Phillipsburg, New Jersey, United States
  • Feb 14th
CHAIN VISE / PIPE VISE, VULCAN NO. 4, J.H.WILLIAMS & CO., steel

CHAIN VISE / PIPE VISE, VULCAN NO. 4, J.H.WILLIAMS & CO., steel

  • Glen Arm, Maryland, United States
  • Feb 14th
TRADE MARK #2 LIVE CENTER JAPAN

TRADE MARK #2 LIVE CENTER JAPAN

  • Fort Myers, Florida, United States
  • Feb 15th
Riten B&S #7 Carbide-Tipped Solid Dead Center (69407)

Riten B&S #7 Carbide-Tipped Solid Dead Center (69407)

  • Round Lake, Illinois, United States
  • Feb 15th
MT2 MT3 HEADSTOCK SPINDLE SLEEVE ARBOR & MT2 DEAD CENTER LATHE TOOL LOT

MT2 MT3 HEADSTOCK SPINDLE SLEEVE ARBOR & MT2 DEAD CENTER LATHE TOOL LOT

  • United States
  • Feb 15th
4" Machinist Vise

4" Machinist Vise

  • United States
  • Feb 15th
Wilton 3-Axis Precision Tilting Vise WMH11700 NEW

Wilton 3-Axis Precision Tilting Vise WMH11700 NEW

  • Redford, Michigan, United States
  • Feb 15th
C10-ER11A-150L Straight Shank Collet Chuck Holder CNC Lather Milling 10mmx150mm

C10-ER11A-150L Straight Shank Collet Chuck Holder CNC Lather Milling 10mmx150mm

  • Shen Zhen, China
  • Feb 17th
C10-ER11A-120L Straight Shank Collet Chuck Holder CNC Lather Milling 10mmx120mm

C10-ER11A-120L Straight Shank Collet Chuck Holder CNC Lather Milling 10mmx120mm

  • Shen Zhen, China
  • Feb 17th
C10-ER11A-100L Straight Shank Collet Chuck Holder CNC Lather Milling 10mmx100mm

C10-ER11A-100L Straight Shank Collet Chuck Holder CNC Lather Milling 10mmx100mm

  • Shen Zhen, China
  • Feb 17th
Used Jacobs Arbor Adapter from Morse Taper #3 to Jacobs Taper #3, 403-7315

Used Jacobs Arbor Adapter from Morse Taper #3 to Jacobs Taper #3, 403-7315

  • Bristol, Connecticut, United States
  • Feb 28th
Used Edward Andrews Morse Taper #2 Tool Holder, 1" O.D., 3.75" Length, EA66-02

Used Edward Andrews Morse Taper #2 Tool Holder, 1" O.D., 3.75" Length, EA66-02

  • Bristol, Connecticut, United States
  • Feb 28th
New Transfer Punch Set 28 pcs 4-7/8" long 3/32" thru 1/2" in 64ths plus 17/32"

New Transfer Punch Set 28 pcs 4-7/8" long 3/32" thru 1/2" in 64ths plus 17/32"

  • Claremont, California, United States
  • Mar 1st
Parting Out Shizuoka Mold Master SV-50 Parts BallScrew Spindle Motor Machine Cnc

Parting Out Shizuoka Mold Master SV-50 Parts BallScrew Spindle Motor Machine Cnc

  • Rolla, Missouri, United States
  • Jun 13th
9" FADAL Full 4th Axis with Servo, Servo Drive and CNC Milling Control Card!

9" FADAL Full 4th Axis with Servo, Servo Drive and CNC Milling Control Card!

  • Peoria, Arizona, United States
  • Jun 14th
L-W CHUCK CO. TOLEDO OHIO INDEX TABLE UNIVERSAL DIVIDING HEADS TABLE CHART LW CO

L-W CHUCK CO. TOLEDO OHIO INDEX TABLE UNIVERSAL DIVIDING HEADS TABLE CHART LW CO

  • Sonoma, California, United States
  • Jun 15th
Sandvik 40MM-VF-12541 Collet Tap Tapping Chuck CAT-40 V-Flange Taper Shank

Sandvik 40MM-VF-12541 Collet Tap Tapping Chuck CAT-40 V-Flange Taper Shank

  • Lorain, Ohio, United States
  • May 25th
Lyndex-Nikken C4007-0016-3.50 ER16 Collet Chuck - Projection : 3.50'

Lyndex-Nikken C4007-0016-3.50 ER16 Collet Chuck - Projection : 3.50'

  • Duncan, South Carolina, United States
  • May 25th
Lyndex-Nikken C4007-0025-2.50 ER25 Collet Chuck - Projection : 2.50'

Lyndex-Nikken C4007-0025-2.50 ER25 Collet Chuck - Projection : 2.50'

  • Duncan, South Carolina, United States
  • May 25th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies