+ Post new Ad
MAG-MATE PNL0800 Lifting Magnet, 800 lb Cap, 7-7/8 In OAL, FREE SHIPPING, @PA@, US $292 – Picture 0
MAG-MATE PNL0800 Lifting Magnet, 800 lb Cap, 7-7/8 In OAL, FREE SHIPPING, @PA@, US $292 – Picture 0

Mag-mate Pnl0800 Lifting Magnet, 800 Lb Cap, 7-7/8 In Oal, Free Shipping, @pa@

US $292

  • Saint Louis, Missouri, United States
  • Jun 9th
Open on mobile:
QR code
NEW CONDITION FREE SHIPPING Technical Specs ItemLifting Magnet Magnet ActivationLocking On/Off Handle Magnet MaterialNeodymium Max. Rated Flat Capacity800 lb. Max. Rated Round Capacity400 lb. Overall Height8-7/8" Overall Length7-7/8" Overall Width3-5/8" Magnet Height3-7/8" Magnet Width3-5/8" Magnet Length6-3/8" Handle Length6-7/8" Bail Opening Height2-3/8" Bail Opening Width1-3/4" Max. Heat Resistant Temp.180 Degrees F FeaturesRFID Enabled StandardsASME B30.20 FootnotesMax. Rated Capacities Based On Clean, Polished Steel and Dependant on Material Thickness and Size *Note: If you have any issues at all with your order, it is faster and easier for us to use the eBay messaging system to come to a resolution, rather than opening a case, or leaving negative or neutral feedback.  You can also contact us directly at (314) 439-1030 if you have any issues or questions* ** We strive to deliver top notch service with every order we process, and it would thrill us to receive your POSITIVE rating!!!

Directions

Similar products from Other Workholding Tools

4 Sets of 6 Pair of NEW Enco Parallels 1/8 x 6 inches long 1/2 to 1-5/8 tall!

4 Sets of 6 Pair of NEW Enco Parallels 1/8 x 6 inches long 1/2 to 1-5/8 tall!

  • Troy, Missouri, United States
  • Jun 14th
Machinist Screw Jack Set (MT-02)

Machinist Screw Jack Set (MT-02)

  • Waterbury, Connecticut, United States
  • Jun 13th
Machinist Tools: 6 South Bend Lathe Dogs & Drive NOS, Faceplate 1-1/2"-8 TPI

Machinist Tools: 6 South Bend Lathe Dogs & Drive NOS, Faceplate 1-1/2"-8 TPI

  • Tewksbury, Massachusetts, United States
  • Jun 13th
Airetool tube expanders

Airetool tube expanders

  • Tomball, Texas, United States
  • Jun 13th
Morse Taper 2 MT Lathe Milling Tool Holder

Morse Taper 2 MT Lathe Milling Tool Holder

  • Youngstown, Ohio, United States
  • Jun 13th
Lathe Milling Tool Holder

Lathe Milling Tool Holder

  • Youngstown, Ohio, United States
  • Jun 13th
Machinist Material Jack & Jack Parts

Machinist Material Jack & Jack Parts

  • Paris, Ohio, United States
  • Jun 12th
9 South Bend Lathe 9" And 10" Gear Cover With Mounting Bracket ..

9 South Bend Lathe 9" And 10" Gear Cover With Mounting Bracket ..

  • Melbourne, Florida, United States
  • Jun 10th
ENERPAC SERVICE PARTS B3304K NEW 1298G Seal Kit Repair Kit

ENERPAC SERVICE PARTS B3304K NEW 1298G Seal Kit Repair Kit

  • Chicago, Illinois, United States
  • Jun 9th
^^SIGNATONE MODEL S-725-SRM MICROPOSITIONER

^^SIGNATONE MODEL S-725-SRM MICROPOSITIONER

  • Bosque Farms, New Mexico, United States
  • Jun 9th
NEW HAAS TL-1 LATHE STEADY REST

NEW HAAS TL-1 LATHE STEADY REST

  • West Berlin, New Jersey, United States
  • Jun 9th
MACHINIST TOOL LATHE Machinist Lot of 2 Starrett Screw Jack s for Set Up

MACHINIST TOOL LATHE Machinist Lot of 2 Starrett Screw Jack s for Set Up

  • Morris Plains, New Jersey, United States
  • Jun 9th
Original Southbend 16 Inch Steady Rest Lathe 16-125

Original Southbend 16 Inch Steady Rest Lathe 16-125

  • Van Meter, Iowa, United States
  • Jun 9th
Steel Adapter Plate Tool Grade 1018

Steel Adapter Plate Tool Grade 1018

  • Hudson, New York, United States
  • Jun 9th
MACHINSTS JACK WITH RISERS EXTENTIONS EXTRAS STARRETT

MACHINSTS JACK WITH RISERS EXTENTIONS EXTRAS STARRETT

  • Carol Stream, Illinois, United States
  • Jun 9th
Alpha A-Pod Magnetic Workholding System 10 Magnets w/ Controller Milling Magnet

Alpha A-Pod Magnetic Workholding System 10 Magnets w/ Controller Milling Magnet

  • Helenville, Wisconsin, United States
  • Jun 9th
3 1/2" MACHINIST SCREW JACK

3 1/2" MACHINIST SCREW JACK

  • West Chicago, Illinois, United States
  • Jun 9th
IMPORT 4" 3 JAW MANUAL LATHE CHUCK W/ 5C ARBOR

IMPORT 4" 3 JAW MANUAL LATHE CHUCK W/ 5C ARBOR

  • Roanoke, Virginia, United States
  • Jun 9th
Cen-Tech 4" Precision Vise 2-Way Tilt & Swivel Machining Machinist Milling Mill

Cen-Tech 4" Precision Vise 2-Way Tilt & Swivel Machining Machinist Milling Mill

  • Waldo, Wisconsin, United States
  • Jun 9th
4-1/2" Adjustable Precision Vise Tilt & Swivel Machining Machinist Milling Mill

4-1/2" Adjustable Precision Vise Tilt & Swivel Machining Machinist Milling Mill

  • Waldo, Wisconsin, United States
  • Jun 9th

People who viewed this item also vieved

Lot of miscellaneous machinist set-up blocks, v-blocks, fixtures

Lot of miscellaneous machinist set-up blocks, v-blocks, fixtures

  • Christiansburg, Virginia, United States
  • Jan 30th
Two pair of machinist step blocks

Two pair of machinist step blocks

  • Christiansburg, Virginia, United States
  • Jan 30th
Precision Parallel Set 7/8 thru 1 3/4

Precision Parallel Set 7/8 thru 1 3/4

  • Springfield, Illinois, United States
  • Jan 30th
NEIDLEIN 28MM OD DEAD CENTER 24MM SHANK 2.5" OAL NL735 222 (LOC1227B) TS12

NEIDLEIN 28MM OD DEAD CENTER 24MM SHANK 2.5" OAL NL735 222 (LOC1227B) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
NEIDLEIN 18MM OD DEAD CENTER 14MM SHANK 1.75" OAL NL735 208 (LOC1227A) TS12

NEIDLEIN 18MM OD DEAD CENTER 14MM SHANK 1.75" OAL NL735 208 (LOC1227A) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
SPEEDGRIP 30MM DEAD CENTER 4.5" OAL 4399 152 00050 (LOC1227A) TS12

SPEEDGRIP 30MM DEAD CENTER 4.5" OAL 4399 152 00050 (LOC1227A) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
12" Ajax CNC Lathe Chuck Jaws Tools 3 Hard Single Step Jaws fit Kitagawa B12

12" Ajax CNC Lathe Chuck Jaws Tools 3 Hard Single Step Jaws fit Kitagawa B12

  • Columbus, Ohio, United States
  • Jan 30th
Ajax 12" CNC Lathe Chuck Jaws 3 Soft Steel Top Jaws NEW fit Kitagawa B212

Ajax 12" CNC Lathe Chuck Jaws 3 Soft Steel Top Jaws NEW fit Kitagawa B212

  • Columbus, Ohio, United States
  • Jan 30th
Self-Centering Manual Lathe Chuck, 10", 3 Jaws, Cast Iron (50C)

Self-Centering Manual Lathe Chuck, 10", 3 Jaws, Cast Iron (50C)

  • Saint Louis, Missouri, United States
  • Jan 30th
Toggle Clamp CL-350-TPC Carr Lane Tapped Plunger

Toggle Clamp CL-350-TPC Carr Lane Tapped Plunger

  • Roy, Utah, United States
  • Jan 30th
NEW De-Sta-Co 895/891 Heavy Duty Pneumatic Power Hold Down Clamp 895132 w/ Arm

NEW De-Sta-Co 895/891 Heavy Duty Pneumatic Power Hold Down Clamp 895132 w/ Arm

  • Leander, Texas, United States
  • Jan 30th
PHD Incorporated Pneumatic Gripper Clamp GRM2TS-2-45DDS-00DDS-LAA-SJA1

PHD Incorporated Pneumatic Gripper Clamp GRM2TS-2-45DDS-00DDS-LAA-SJA1

  • Leander, Texas, United States
  • Jan 30th
SHARS 5/8" CAT40 Integrated Precision Ball Bearing Keyless Drill Chuck

SHARS 5/8" CAT40 Integrated Precision Ball Bearing Keyless Drill Chuck

  • Saint Charles, Illinois, United States
  • Jan 30th
PARLEC, C40-16ER512, Collet Chuck, Through Coolant, Taper Shank, USA /BE4/

PARLEC, C40-16ER512, Collet Chuck, Through Coolant, Taper Shank, USA /BE4/

  • Saint Peters, Missouri, United States
  • Jan 30th
CNC MILL LATHE TOOL/TAP HOLDER GLENCO

CNC MILL LATHE TOOL/TAP HOLDER GLENCO

  • Plainwell, Michigan, United States
  • Jan 30th
Erikson E656-7312 Type F .688 Collet for 1/2" Pipe Tap

Erikson E656-7312 Type F .688 Collet for 1/2" Pipe Tap

  • Lebanon, Tennessee, United States
  • Jan 30th
Erikson E656-7312 Type F .281 Collet

Erikson E656-7312 Type F .281 Collet

  • Lebanon, Tennessee, United States
  • Jan 30th
1-3/16" ACURA-GRIP #901250 Collet

1-3/16" ACURA-GRIP #901250 Collet

  • Lebanon, Tennessee, United States
  • Jan 30th
Cisco 2911 Router Faceplate for Replacement

Cisco 2911 Router Faceplate for Replacement

  • Hong kong, Hong Kong
  • Jan 30th
Pneumatic swing clamp cylinder

Pneumatic swing clamp cylinder

  • Arlington, Texas, United States
  • Jan 30th
ENERPAC WFL111 WORK SUPPORT

ENERPAC WFL111 WORK SUPPORT

  • Guelph, Ontario, Canada
  • Jan 30th
Adjustable tailstock for 6" rotary tables

Adjustable tailstock for 6" rotary tables

  • Duluth, Georgia, United States
  • Jan 30th
Universal Vice and Tool Company Rotary Table Inv.28854

Universal Vice and Tool Company Rotary Table Inv.28854

  • Portland, Connecticut, United States
  • Jan 30th
11" MOORE "Ultra Precise" Horizontal/Vertical Rotary Table

11" MOORE "Ultra Precise" Horizontal/Vertical Rotary Table

  • Hauppauge, New York, United States
  • Jan 30th
Heavy Duty Hitch Mounted Vise Mount from American Van

Heavy Duty Hitch Mounted Vise Mount from American Van

  • Lakewood, New Jersey, United States
  • Jan 30th
Very nice heavy duty milling vise 5" w/ swivel rotary base Drill American Kurt

Very nice heavy duty milling vise 5" w/ swivel rotary base Drill American Kurt

  • Lebanon, Pennsylvania, United States
  • Jan 30th
USED Hermann Schmidt Precision Grinding Vise 4” Capacity - V0-4 in Original Box

USED Hermann Schmidt Precision Grinding Vise 4” Capacity - V0-4 in Original Box

  • Holland, Ohio, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies