+ Post new Ad
Magnetic MSC V Block Set 3-3/16" x 2-3/8" Model #01292390 MSRP $300, US $450 – Picture 0
Magnetic MSC V Block Set 3-3/16" x 2-3/8" Model #01292390 MSRP $300, US $450 – Picture 0

Magnetic Msc V Block Set 3-3/16" X 2-3/8" Model #01292390 Msrp $300

US $450

  • Venice, Florida, United States
  • Jun 6th
Open on mobile:
QR code
V BLOCK SET Type Magnetic V-Block Set Overall Length (mm) 80.96 Overall Length (Inch) 3-3/16 Overall Width (mm) 60.33 Overall Width (Inch) 2-3/8 Overall Height (mm) 95.25 Overall Height (Inch) 3-3/4 Magnetic (Yes/No) Yes Minimum Capacity of V (mm) 4.76 Minimum Capacity of V (Inch) 3/16 Maximum Capacity of V (mm) 69.85 Maximum Capacity of V (Inch) 2-3/4 V Angle (Degrees) 90.00 Material: Steel   Model # 01292390 MSRP: $300   This set appears to be in excellent condition. Open-box overstock, no signs of previous use or wear. Comes as shown in pictures.   Shipping Weight: 10 Lbs. Shipping Dimensions: 11" D x 9" L x 7" W      Dustin / 1.27.15 / S G 2 rear / 24784 DP 9/9/15 jpf 2-10-16

Directions

Similar products from Supporting Blocks & Sets

Norton SG2R6K7 7/16" Diamond Multi Point Wheel Dresser 02/09 66260195378 New

Norton SG2R6K7 7/16" Diamond Multi Point Wheel Dresser 02/09 66260195378 New

  • Xenia, Ohio, United States
  • Jun 7th
MACHINIST TOOLS LATHE MILL Nice Machinist Lot of Large Heavy Block s

MACHINIST TOOLS LATHE MILL Nice Machinist Lot of Large Heavy Block s

  • Morris Plains, New Jersey, United States
  • Jun 7th
Starrett No.278 Pair of matched Vee Blocks with Clamps Machinist Toolmaker

Starrett No.278 Pair of matched Vee Blocks with Clamps Machinist Toolmaker

  • Claremont, California, United States
  • Jun 7th
Precision Ground Parallels

Precision Ground Parallels

  • Chalfont, Pennsylvania, United States
  • Jun 7th
WoodRiver Side Rabbet Plane

WoodRiver Side Rabbet Plane

  • Saint Petersburg, Florida, United States
  • Jun 7th
Hertel 32mm H5NG Tool Block for Blade HBO70075J

Hertel 32mm H5NG Tool Block for Blade HBO70075J

  • Venice, Florida, United States
  • Jun 6th
Made in USA Individual Block 4-3/8" x 2-3/8"

Made in USA Individual Block 4-3/8" x 2-3/8"

  • Venice, Florida, United States
  • Jun 6th
2" x 2" Rubber Bench Block - Jewelry Design, Texturing, Stamping & Embossing

2" x 2" Rubber Bench Block - Jewelry Design, Texturing, Stamping & Embossing

  • Temecula, California, United States
  • Jun 6th
Fowler 52-475-555 Hard steel V-Block Set 2" Clamp Cap 2" H x 2.25" L x 2" W i

Fowler 52-475-555 Hard steel V-Block Set 2" Clamp Cap 2" H x 2.25" L x 2" W i

  • Venice, Florida, United States
  • Jun 6th
Brown & Sharpe 3/4" to 1 3/4" Parallel Set 1/4" Thick (8 Pairs)Missing 1 1/4 Pr

Brown & Sharpe 3/4" to 1 3/4" Parallel Set 1/4" Thick (8 Pairs)Missing 1 1/4 Pr

  • Venice, Florida, United States
  • Jun 6th
MACHINIST MILL LATHE Nice Set of Hold Down Set Up Block Clamps New Unused in Box

MACHINIST MILL LATHE Nice Set of Hold Down Set Up Block Clamps New Unused in Box

  • Morris Plains, New Jersey, United States
  • Jun 6th
Import Step Block 407-6150 2-1/2" to 6" Adjustable Powder Casting Steel 2 Pc. 2Y

Import Step Block 407-6150 2-1/2" to 6" Adjustable Powder Casting Steel 2 Pc. 2Y

  • Saint Louis, Missouri, United States
  • Jun 6th
2 Pairs Machinist/Toolmakers Parallels

2 Pairs Machinist/Toolmakers Parallels

  • Athens, Georgia, United States
  • Jun 6th
Set Up Blocks 2-4-6 5/8-11 unbranded

Set Up Blocks 2-4-6 5/8-11 unbranded

  • Venice, Florida, United States
  • Jun 6th
90 Degree angle Block Set setup die makers Plate clamp Shop Tool 3 x 4 x 8 Tslot

90 Degree angle Block Set setup die makers Plate clamp Shop Tool 3 x 4 x 8 Tslot

  • Grand Rapids, Michigan, United States
  • Jun 6th
Hertel 1.25" SGTBN Tool Block Blade Holder HBO70075J

Hertel 1.25" SGTBN Tool Block Blade Holder HBO70075J

  • Venice, Florida, United States
  • Jun 6th
2" x 2-3/8" x 2-3/8" Hardened Steel V-Block Pair Unbranded/Generic

2" x 2-3/8" x 2-3/8" Hardened Steel V-Block Pair Unbranded/Generic

  • Venice, Florida, United States
  • Jun 6th
1 Assorted Lot of Machine Parallels (Inv.34522)

1 Assorted Lot of Machine Parallels (Inv.34522)

  • Portland, Connecticut, United States
  • Jun 6th
4 Pair 3/16" - 1/2'' x 6'' Steel Parallel Set Precision Gage Gauge Block 8 PCS

4 Pair 3/16" - 1/2'' x 6'' Steel Parallel Set Precision Gage Gauge Block 8 PCS

  • Fenton, Missouri, United States
  • Jun 6th
Massive NEW MOORE & WRIGHT UK 214 Matched Ground Pair of V BLOCKS $550 M1C6.1

Massive NEW MOORE & WRIGHT UK 214 Matched Ground Pair of V BLOCKS $550 M1C6.1

  • Perth, Ontario, Canada
  • Jun 6th

People who viewed this item also vieved

MT4 CARBIDE TIPPED SINGLE POINT DEAD CENTER (3900-5059)

MT4 CARBIDE TIPPED SINGLE POINT DEAD CENTER (3900-5059)

  • Chino, California, United States
  • Jan 30th
MT1 STEEL DEAD CENTER (3900-5051)

MT1 STEEL DEAD CENTER (3900-5051)

  • Chino, California, United States
  • Jan 30th
MT4 STEEL DEAD CENTER (3900-5064)

MT4 STEEL DEAD CENTER (3900-5064)

  • Chino, California, United States
  • Jan 30th
Lathe Chuck Key - Five Sided Head

Lathe Chuck Key - Five Sided Head

  • Fox Island, Washington, United States
  • Jan 30th
4 Pcs. Hardinge Step Chuck Closer

4 Pcs. Hardinge Step Chuck Closer

  • Newark, New Jersey, United States
  • Jan 30th
Craftsman Atlas Lathe #U-435 Three Jaw Chuck

Craftsman Atlas Lathe #U-435 Three Jaw Chuck

  • Fox Island, Washington, United States
  • Jan 30th
DE-STA-CO 895-SL-R100K-C100K-CHES PNEUMATIC CLAMP USED

DE-STA-CO 895-SL-R100K-C100K-CHES PNEUMATIC CLAMP USED

  • Bay City, Michigan, United States
  • Jan 30th
Flexible Rubber Draw latch SouthCo # 37-10-086-20 #37 1 Pc New

Flexible Rubber Draw latch SouthCo # 37-10-086-20 #37 1 Pc New

  • Redford, Michigan, United States
  • Jan 30th
3 KNU-VISE locking clamps metal tools machinists antique vintage old adjustable

3 KNU-VISE locking clamps metal tools machinists antique vintage old adjustable

  • Geneseo, Illinois, United States
  • Jan 30th
NICE Original Hardinge 1-5/8" Cone Collet 1-9/16", Threaded Lathe Grinder ID/OD

NICE Original Hardinge 1-5/8" Cone Collet 1-9/16", Threaded Lathe Grinder ID/OD

  • Hopkins, Minnesota, United States
  • Jan 30th
3 Kennametal DA300 Collet Chucks # SS050DA304681 .500 diameter shank. 1 collet.

3 Kennametal DA300 Collet Chucks # SS050DA304681 .500 diameter shank. 1 collet.

  • Enfield, Connecticut, United States
  • Jan 30th
SEA TECH COLLET CLIP (QTY: 150) PART # 1147-15 BEIGE 5/8"

SEA TECH COLLET CLIP (QTY: 150) PART # 1147-15 BEIGE 5/8"

  • Franklin, Wisconsin, United States
  • Jan 30th
Cast Iron Angle Plate 10 x 12 x 8

Cast Iron Angle Plate 10 x 12 x 8

  • Fort Worth, Texas, United States
  • Jan 30th
TEC A2F/-/V3880 Grip Dia. 28.5mm Lathe Jaws Set of 3

TEC A2F/-/V3880 Grip Dia. 28.5mm Lathe Jaws Set of 3

  • Chicago, Illinois, United States
  • Jan 30th
TEC A2F/-/V3880 Grip Dia. 53.9mm Lathe Jaws Set of 3

TEC A2F/-/V3880 Grip Dia. 53.9mm Lathe Jaws Set of 3

  • Chicago, Illinois, United States
  • Jan 30th
5 New F&D Shell Reamers

5 New F&D Shell Reamers

  • Wellsville, Utah, United States
  • Jan 30th
Lot of 4 Dividing head

Lot of 4 Dividing head

  • Middlesex, New Jersey, United States
  • Jan 30th
Starrett Setup Jack Set # 190

Starrett Setup Jack Set # 190

  • Hopatcong, New Jersey, United States
  • Jan 30th
1-7/16" Hole 17" Long machine wrench Table crank handle special rare tool parts

1-7/16" Hole 17" Long machine wrench Table crank handle special rare tool parts

  • Grand Rapids, Michigan, United States
  • Jan 30th
8.25" Offset Mill machine wrench Table elevation crank slotted handle tool parts

8.25" Offset Mill machine wrench Table elevation crank slotted handle tool parts

  • Grand Rapids, Michigan, United States
  • Jan 30th
7.5" Offset Mill machine wrench Table elevation crank slotted handle tool parts

7.5" Offset Mill machine wrench Table elevation crank slotted handle tool parts

  • Grand Rapids, Michigan, United States
  • Jan 30th
L & W CHUCK CO DIVIDING HEAD

L & W CHUCK CO DIVIDING HEAD

  • Roanoke, Virginia, United States
  • Mar 10th
(2)PRECISION MACHINIST ROTARY TABLE, Precision Watchmakers or machinist XY table

(2)PRECISION MACHINIST ROTARY TABLE, Precision Watchmakers or machinist XY table

  • Pleasant Hill, Missouri, United States
  • Mar 10th
Yuasa 12 Inch Rotary Table

Yuasa 12 Inch Rotary Table

  • Westfield, Indiana, United States
  • Mar 10th
Used NIKKEN BT30 SK10-45 SK10 SLIMCHUCK COLLET CHUCK (M) (WR.8.B.A.13)

Used NIKKEN BT30 SK10-45 SK10 SLIMCHUCK COLLET CHUCK (M) (WR.8.B.A.13)

  • Perth, Ontario, Canada
  • Mar 12th
Used NIKKEN BT30 SK10-45 SK10 SLIMCHUCK COLLET CHUCK (L) (WR.8.B.A.12)

Used NIKKEN BT30 SK10-45 SK10 SLIMCHUCK COLLET CHUCK (L) (WR.8.B.A.12)

  • Perth, Ontario, Canada
  • Mar 12th
Used NIKKEN BT30 SK10-45 SK10 SLIMCHUCK COLLET CHUCK (K) (WR.8.B.A.11)

Used NIKKEN BT30 SK10-45 SK10 SLIMCHUCK COLLET CHUCK (K) (WR.8.B.A.11)

  • Perth, Ontario, Canada
  • Mar 12th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies