+ Post new Ad
Magnetic Transfer Parallel .850" x 1-3/4" x 5-1/16", US $160 – Picture 0
Magnetic Transfer Parallel .850" x 1-3/4" x 5-1/16", US $160 – Picture 0

Magnetic Transfer Parallel .850" X 1-3/4" X 5-1/16"

US $160

  • Chalfont, Pennsylvania, United States
  • Jun 2nd
Open on mobile:
QR code
Used- (Vintage-1925) Magnetic Transfer Parallel, Brass & Steel Pins. H=.850" x W=1-3/4" x L=5-1/16" Has Owner Markings (Stamped) on Both Ends. Some Light Staining & Some Very Small Dents. In Very Good Condition! for 91 Years Old

Directions

Similar products from Supporting Blocks & Sets

Pratt & Whitney Machinist Parallel Bars * Set of 2 * 11/16” x 1 15/16” x 3 3/4”

Pratt & Whitney Machinist Parallel Bars * Set of 2 * 11/16” x 1 15/16” x 3 3/4”

  • Rio Rancho, New Mexico, United States
  • Jun 3rd
Starrett Brand #384 Machinist Parallel Bars #1 * Set of 2 * 1/8” x 1 3/16” x 6”

Starrett Brand #384 Machinist Parallel Bars #1 * Set of 2 * 1/8” x 1 3/16” x 6”

  • Rio Rancho, New Mexico, United States
  • Jun 3rd
Pratt & Whitney Machinist Parallel Bars * Set of 2 * 13/16” x 1 31/32” x 3 29/32

Pratt & Whitney Machinist Parallel Bars * Set of 2 * 13/16” x 1 31/32” x 3 29/32

  • Rio Rancho, New Mexico, United States
  • Jun 3rd
Spi 1-2-3 Universal Setup Blocks 1" x 2" x 3" 0.0001" Squareness 13-669-7

Spi 1-2-3 Universal Setup Blocks 1" x 2" x 3" 0.0001" Squareness 13-669-7

  • Venice, Florida, United States
  • Jun 3rd
Veritas Cornering Tool Set

Veritas Cornering Tool Set

  • Ardsley, New York, United States
  • Jun 3rd
LOT OF 32 HEAVY DUTY MACHINE TOOL LEVELING WEDGES 17X6X4" EXTENTION

LOT OF 32 HEAVY DUTY MACHINE TOOL LEVELING WEDGES 17X6X4" EXTENTION

  • Rochester, New York, United States
  • Jun 3rd
NICE SEARS CRAFTSMAN 9-4083 V-BLOCKS & CLAMPS TOOLS IN ORIGINAL BOX U.S.A MADE

NICE SEARS CRAFTSMAN 9-4083 V-BLOCKS & CLAMPS TOOLS IN ORIGINAL BOX U.S.A MADE

  • Dayton, Ohio, United States
  • Jun 3rd
LOT OF 3 PRECISION V BLOCKS W/ CLAMPS

LOT OF 3 PRECISION V BLOCKS W/ CLAMPS

  • Ellington, New York, United States
  • Jun 3rd
LOT OF 25 HEAVY DUTY MACHINE TOOL FERREL LEVELING WEDGES 16X6X4"

LOT OF 25 HEAVY DUTY MACHINE TOOL FERREL LEVELING WEDGES 16X6X4"

  • Rochester, New York, United States
  • Jun 3rd
MACHINIST TOOL LATHE MILL Machinist Set of Magnetic Transfer Parallel & V Blocks

MACHINIST TOOL LATHE MILL Machinist Set of Magnetic Transfer Parallel & V Blocks

  • Morris Plains, New Jersey, United States
  • Jun 2nd
Pair Of Magnetic Grinding Plates 3" x 5"

Pair Of Magnetic Grinding Plates 3" x 5"

  • Waynesville, Ohio, United States
  • Jun 2nd
Magnetic Transfer V-Block 90 Degree

Magnetic Transfer V-Block 90 Degree

  • Chalfont, Pennsylvania, United States
  • Jun 2nd
PRECISION TOOLMAKERS MACHINIST HARDENED FISHTAIL V BLOCK JIG USA STARRETT

PRECISION TOOLMAKERS MACHINIST HARDENED FISHTAIL V BLOCK JIG USA STARRETT

  • Mountain View, United States
  • Jun 2nd
Angle Block; 4"x4" Drilled & Tapped (CTAM 9209)

Angle Block; 4"x4" Drilled & Tapped (CTAM 9209)

  • Sicklerville, New Jersey, United States
  • Jun 2nd
Brown & Sharpe No.125 Magnetic Transfer Parallel

Brown & Sharpe No.125 Magnetic Transfer Parallel

  • Chalfont, Pennsylvania, United States
  • Jun 2nd
Machinist 6" Parallel Blocks 1" by 7/16" (4 Way Use)

Machinist 6" Parallel Blocks 1" by 7/16" (4 Way Use)

  • Wheatland, Pennsylvania, United States
  • Jun 2nd
B&S Clamp # 599-0749-2 for 749 V Block.The opening on the bottom is 1.250

B&S Clamp # 599-0749-2 for 749 V Block.The opening on the bottom is 1.250

  • Milwaukee, Wisconsin, United States
  • Jun 2nd
Super Wee Block- Faith Tool Company

Super Wee Block- Faith Tool Company

  • Chalfont, Pennsylvania, United States
  • Jun 2nd
Hwacheon CNC Lathe Tool Holder Blocks Turret Face Wedge Clamp for 1" Square

Hwacheon CNC Lathe Tool Holder Blocks Turret Face Wedge Clamp for 1" Square

  • Surprise, Arizona, United States
  • Jun 2nd
Set of 4 Picador Packing Blox 205 & 206 in original box Made in Great Britain

Set of 4 Picador Packing Blox 205 & 206 in original box Made in Great Britain

  • Swampscott, Massachusetts, United States
  • Jun 2nd

People who viewed this item also vieved

Lathe chuck jaws 3 Pcs looks to be for a 10-12" chuck soft

Lathe chuck jaws 3 Pcs looks to be for a 10-12" chuck soft

  • Montebello, California, United States
  • Jan 30th
Bison Three Jaw Lathe Chuck,12 inch,D1-11 Mount

Bison Three Jaw Lathe Chuck,12 inch,D1-11 Mount

  • York Beach, Maine, United States
  • Jan 30th
BUCK 5" 3 Jaw Chuck & Key & Instr UNUSED USA No Reserve

BUCK 5" 3 Jaw Chuck & Key & Instr UNUSED USA No Reserve

  • Hollis, New York, United States
  • Jan 30th
LOT 19 NEW HILTI MSA-F 3/8IN 257416 SIZE 3/8IN IRON CLAMP B347848

LOT 19 NEW HILTI MSA-F 3/8IN 257416 SIZE 3/8IN IRON CLAMP B347848

  • Buffalo, New York, United States
  • Jan 30th
ARMSTRONG HEAVY DUTY FORGED C CLAMP MADE IN USA- 10" XL- Must See!

ARMSTRONG HEAVY DUTY FORGED C CLAMP MADE IN USA- 10" XL- Must See!

  • Jackson, Tennessee, United States
  • Jan 30th
4, KNU-VISE P-400 Clamps

4, KNU-VISE P-400 Clamps

  • O'Fallon, Missouri, United States
  • Jan 30th
LOT OF 4 2" DEEP 5C STEP COLLETS HARDINGE

LOT OF 4 2" DEEP 5C STEP COLLETS HARDINGE

  • Ellington, New York, United States
  • Jan 30th
Hardinge 4c Collet 5/8

Hardinge 4c Collet 5/8

  • Rensselaer, New York, United States
  • Jan 30th
Hardinge 4c Collet 3/8

Hardinge 4c Collet 3/8

  • Rensselaer, New York, United States
  • Jan 30th
5" Sine Bar - Machinist Tools

5" Sine Bar - Machinist Tools

  • Thousand Oaks, California, United States
  • Jan 30th
VINTAGE L S STARRETT NO. 271 V-BLOCKS PAIR WITH 1 CLAMP

VINTAGE L S STARRETT NO. 271 V-BLOCKS PAIR WITH 1 CLAMP

  • Alexander City, Alabama, United States
  • Jan 30th
Machinist tool,milling machine graduated angle plate

Machinist tool,milling machine graduated angle plate

  • Bennington, New Hampshire, United States
  • Jan 30th
PanaVise tabletop vise lot, NEW (includes model #'s 300, 308, 311, 376 and 396)

PanaVise tabletop vise lot, NEW (includes model #'s 300, 308, 311, 376 and 396)

  • Missoula, Montana, United States
  • Jan 30th
Ridgid Chain Vise BC-210 BC210 1/2" STD Pipe 1/8" - 2/12" Pipe Used

Ridgid Chain Vise BC-210 BC210 1/2" STD Pipe 1/8" - 2/12" Pipe Used

  • Duncansville, Pennsylvania, United States
  • Jan 30th
Wilton 4" Swivel Tilt Spinning Rotating Bench Vise UX121079 4x4 Mounting Base

Wilton 4" Swivel Tilt Spinning Rotating Bench Vise UX121079 4x4 Mounting Base

  • Palmyra, Indiana, United States
  • Jan 30th
Cleaveland #1 high speed Dead center

Cleaveland #1 high speed Dead center

  • New Lenox, Illinois, United States
  • Feb 13th
No. 2 Morst taper dead center

No. 2 Morst taper dead center

  • New Lenox, Illinois, United States
  • Feb 13th
#1 Morse Taper Spur center

#1 Morse Taper Spur center

  • New Lenox, Illinois, United States
  • Feb 13th
ITW Workholding 7082D25 Push Rod

ITW Workholding 7082D25 Push Rod

  • Peoria, Illinois, United States
  • Feb 14th
Magnetic Lifter 100KG / 220Lbs Lifting Magnet Max Capacity on 2" Steel Hoist Mag

Magnetic Lifter 100KG / 220Lbs Lifting Magnet Max Capacity on 2" Steel Hoist Mag

  • Maryville, Tennessee, United States
  • Feb 14th
T-NUTS 10" KITAGAWA CHUCK TYPE T NUT BB210

T-NUTS 10" KITAGAWA CHUCK TYPE T NUT BB210

  • Skokie, Illinois, United States
  • Feb 14th
news rotary table 8 Inch made in japan

news rotary table 8 Inch made in japan

  • South Coffeyville, Oklahoma, United States
  • May 4th
70 mm 4 Jaws INDEPENDENT Chuck with Backplate & T-nut for 3 & 4" Rotary Table

70 mm 4 Jaws INDEPENDENT Chuck with Backplate & T-nut for 3 & 4" Rotary Table

  • DELHI, DELHI, India
  • May 4th
marvin 6

marvin 6" rotary table for atlas and craftsman milling machine - show original title

  • Mishawaka, Indiana, United States
  • May 5th
SYIC BT40XER40-100 G:2.5 RPM:20000 ER40 CLAMPING NUT UM/RD Collet Chuck

SYIC BT40XER40-100 G:2.5 RPM:20000 ER40 CLAMPING NUT UM/RD Collet Chuck

  • Ashdod, Israel
  • May 23rd
REGO-FIX FLOWDRILL ER25 COLLET CHUCK CYL20X100ER25 STK 4283

REGO-FIX FLOWDRILL ER25 COLLET CHUCK CYL20X100ER25 STK 4283

  • Wadley, Alabama, United States
  • May 24th
PRECISION-TOOL Fraseraufnahme SK 40-32-100 MAS 403 BT-AD Collet Chuck

PRECISION-TOOL Fraseraufnahme SK 40-32-100 MAS 403 BT-AD Collet Chuck

  • Ashdod, Israel
  • May 24th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies