Manual Hot Foil Stamping Tipper Bronzing+PVC Card Embossing Machine+2 Gold Rolls, US $765.00 – Picture 0

Manual Hot Foil Stamping Tipper Bronzing+PVC Card Embossing Machine+2 Gold Rolls, US $765.00 – Picture 1

Manual Hot Foil Stamping Tipper Bronzing+PVC Card Embossing Machine+2 Gold Rolls, US $765.00 – Picture 2

Manual Hot Foil Stamping Tipper Bronzing+PVC Card Embossing Machine+2 Gold Rolls, US $765.00 – Picture 3

Manual Hot Foil Stamping Tipper Bronzing+PVC Card Embossing Machine+2 Gold Rolls, US $765.00 – Picture 4

Manual Hot Foil Stamping Tipper Bronzing+PVC Card Embossing Machine+2 Gold Rolls, US $765.00 – Picture 5

Manual Hot Foil Stamping Tipper Bronzing+PVC Card Embossing Machine+2 Gold Rolls, US $765.00 – Picture 6

Manual Hot Foil Stamping Tipper Bronzing+PVC Card Embossing Machine+2 Gold Rolls, US $765.00 – Picture 7

Manual Hot Foil Stamping Tipper Bronzing+PVC Card Embossing Machine+2 Gold Rolls, US $765.00 – Picture 8

Manual Hot Foil Stamping Tipper Bronzing+PVC Card Embossing Machine+2 Gold Rolls, US $765.00 – Picture 9

Manual Hot Foil Stamping Tipper Bronzing+PVC Card Embossing Machine+2 Gold Rolls, US $765.00 – Picture 10

Manual Hot Foil Stamping Tipper Bronzing+PVC Card Embossing Machine+2 Gold Rolls, US $765.00 – Picture 11

Manual Hot Foil Stamping Tipper Bronzing+pvc Card Embossing Machine+2 Gold Rolls

US $765.00

cn, China
Jan 30th

Open on mobile:
QR code

Hot foil stamping machine + PVC Card Embossing Machine (with 2 free gold foil rolls) Hot Foil Stamper Parameters: Maximum Bronzing Area 2 1/3" x 3 1/2" (60mm x 90mm) Workpiece Maximum Height Up to 1 1/2" (40mm) Stamping Platform 5 3/4" x 4" (150mm x 100mm) Operation Mode Manual Foil Feed Length Adjustable 0 - 2 1/3"(0 - 60mm) Temperature Control 0-300 Degrees Celsius Power 300W, Electrothermal Board Working Voltage (AC) 220V ± 10%, or 110 V ± 10% Machine Size 170X390X350mm Weight 9.5 KG CE Approved. Usage: 1. Have the bronzing machine connected with DC, rotate the temperature adjustment knob to set the temperature of 100°C, and then turn on the power switch. 2. Put the bronzing substances on the bronzing table, and then adjust the location ruler of the bronzing table to make the bronzing substances placed on the proper location of the heat conductive rubber or electric aluminum template with the bronzing surface facing up. 3. Have the bronzing machine connected with DC, turn on the power switch and the red power indicator light is on, then rotate the temperature adjustment knob, and set the required temperature according to different materials and prints. The following table can be used as reference. The temperature control indicator light becomes red, and after more 10 minutes, it becomes green, which indicates that the heat transfer plate reaches the required temperature. (Due to automatically constant temperature control, in the bronzing process, the indicator lights will often change the color, but this does not affect the bronzing effect.) 4. When the temperature control indicator light becomes green, use hands to move the handle to make the surface of the heat conductive rubber or electric aluminum template contacted fully with the surface of the bronzing substance. The required temperature varied from the different bronzing papers, if the temperature is too high, the boundary of the colored lines may be beyond the mark, even become indistinct, while if the temperature is not enough high, the coloring may not be uniform. For this arrangement, the temperature shall be adjusted according to the bronzing effect. 5. Pressure and bronzing time: The too dark bronzing lines indicate that the surface pressure is too large, while the too light even incomplete bronzing lines suggest that the surface pressure is too small; and if the bronzing time is too long, the bronzing coloring will be beyond the mark, even become indistinct, while if the bronzing time is too short, the coloring will not be uniform. The smooth surface of prints requires a smaller pressure and a shorter bronzing time, while the rough surface of prints requires a larger pressure and a longer bronzing time. 6. Adjust the height limit nut to limit the pressing and bronzing height, and avoid the collision and damage among the word surface, the surface of the heat transfer plate and the bronzing surface due to using large strength to pull the handle. 7. To save the foil paper, it is possible to adjust the length adjustment knob of the foil paper according to the length of the bronzing surface, so that the paper-advance length per time is suitable for the length of the bronzing surface. 8. After tried India to be good may start officially to burn India. After volume tin foil burns India to use, gyrates receives the paper axis knob to cause red to instruct the knob faced the tin foil which on was allowed upwardly to take out causes to use up. PVC Card Embosser Parameters: Workpiece Normative PVC card, 85.5mm x 55mm (3-3/8" x 2-1/8") Operation Mode Manual Embossment Indicator Pin point and sample card Embossment line 1-11 lines Embossment Pitch 1/7 inch or 1/10 inch (for smaller characters) Internal 68 Codes & Characters Capitalization case of English letters (26):A~Z Capitalization & Lower Arabic numerals (20):0~9 Small symbols (8): &`,. –/() Large symbols (12):? N O ? $ ? ?-/( ) : Modify splanishing symbols(2):? ? (1 for Small Characters, 1 for Large Characters) Package Includes 1*Machine; I* Set of tool, 1*Sample, 1 English User Guide Dimension 339mm x 269mm x 165mm Gross Weight 11 kg Foil Rolls Parameters: Thickness 12 micron Size 80mm x 120m( 3.15 inch x 393.7 feet) / roll Colour Gold Usage Stamping on both paper, leather, plastic, cloth, PVC cards, etc. Applications Popular used in all kinds of cards ( greeting/invitation/business card, IC,IP,VIP,credit card, & labels ), calendar, wine packing box, cosmetic ,tobacco, ribbon, photo album, pencil, book, napkin, and so on. Storage a) Protected from pressure, dampness, heat, and sunshine b) Place in ventilated, shaded and cool places Storage time 2 years Stamping temperature 110 - 125°C Package Includes: 1 hot foil stamping machine with parts 1 PVC card embossing machine with parts 2 foil rolls ( gold color ) Shipping & Handling: 1. We ship to most countries. 2. All items will be well packed and shipped within 2 business days when your payment is cleared. Delivery time is as follows about 5-7 business days to USA about 6-8 business days to United Kingdom and most other countries. about 12-20 business days to Russia, Africa, and South America. Please note that delivery time may be affected by the postal service or customs handling time . 3. We will ship to eBay address, not PO Box/ APO/ FPO. Contact number is required to ensure a secured shipping. All items will be shipped from Hong Kong via HK Post, DHL, EMS( e-packet), USPS, UPS, FEDEX etc. 4. Please note that we are not responsible for any possible import duties, taxes and customs charges. Please check those with your local customs before purchase. What we can do is to mark the item as "gift" or "sample", which may help you save from possible taxes. Payments: 1. We only accept PayPal. 2. Unpaid dispute will be opened when the payment is not cleared in 3 business days. Return Policy: 1. Any faulty item will be replaced for a brand new one or full money back. 2. We also offer 30-day Money Back for any unused and undamaged items. 3. Items must be returned in original package and in resellable condition. 4. Please note that we are not responsible for any damages occurred during shipping or by customs. About Feedbacks: 1. Feel free to contact us for any further helps. We will respond as soon as possible. If you do not hear from us, please check your junk or spam mailbox. 2. If you are happy with our item and services, please leave us positive feedback and 5 star rate. Please contact us before leaving Neutral or Negative feedback. Leaving negative feedback cannot solve problems, but good communications will do!

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	WD
Model	90A