Manual Injection Molding Machine For Plastic, Mini Thermoplast Benchtop

C $1,399.00

North York, Canada
Jul 4th

Open on mobile:
QR code

Never Used Machine parameters: - Power 0.3 kW - Voltage 230 / 120V (I will send you the version corresponding to your country with EU or US plug) - The maximum temperature is 300 degrees Celsius. - Electronic temperature controller (Shows temperature in degrees Celsius) - The end of the nozzle is tapered, with an angle of 120 degrees - Diameter of the hole in the nozzle 5 mm - Maximum theoretical single injection volume 73 cubic centimeters (4.4 cubic inches) !!! Note that the maximum theoretical single shot volume is the volume that can be squeezed out in one lever movement. But it is not equal to the volume of the product that you can get. The maximum product that could be obtained is ~ 37 grams ~ 39 centimeters cubic ~ 2.38 cubic inches. The main parameters that affect the size of the products that you can get: - material and temperature of raw materials - material and temperature of the form - the size of the inlet in the mold. - geometric characteristics of the form - the smaller the thickness of the walls, the more difficult it is to shed the form (for example, the handle for a screwdriver is much easier to make than a soap dish) I test the machines before shipping, so there will be a small amount of plastic left in the cylinder.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Machine Type	Injection Molding Machine
Control	Manual