+ Post new Ad
Manual Lathe Chuck Self Centering Nominal Chuck Size 8 #08606485, US $169.99 – Picture 0
Manual Lathe Chuck Self Centering Nominal Chuck Size 8 #08606485, US $169.99 – Picture 0

Manual Lathe Chuck Self Centering Nominal Chuck Size 8 #08606485

US $169.99

  • Saint Peters, Missouri, United States
  • Jan 30th
Open on mobile:
QR code
Specs Manual Lathe Chucks; Chuck Type: Self-Centering; Nominal Chuck Size: 8; Number of Jaws: 3; Adjustable (Yes/No): No; Mount: D1-6; Through-Hole Diameter (mm): 50.00 Chuck Type Self-Centering Nominal Chuck Size 8 Number of Jaws 3 Adjustable (Yes/No) No Mount D1-6 Through-Hole Diameter (mm) 50.00 Through-Hole Diameter (Decimal Inch) 1.9685 Body Material Cast Iron Number of Jaw Pieces Two-Piece Reversible (Yes/No) Yes Chuck Diameter (mm) 254.00 Chuck Diameter (Inch) 8 Includes Jaws We sell high-quality industrial surplus at discounted prices.  While we take every effort to inspect and test each item we sell, we do not have the capability to fully evaluate many of the items we sell.  All items are sold as is with no warranty (unless otherwise specified) and are non-returnable.  If you don’t see the answer you are looking for in our description or photos, PLEASE ask before purchasing. 
Condition New other (see details) :
A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
Seller Notes “Not in original packaging. See Pic.”

Directions

Similar products from Lathe Chucks

Union mfg 4 in lathe head chuck

Union mfg 4 in lathe head chuck

  • Rittman, Ohio, United States
  • Jan 30th
BUCK 8" CHUCK , 6 JAW , 4862

BUCK 8" CHUCK , 6 JAW , 4862

  • Berlin, Connecticut, United States
  • Jan 30th
TURET LATHE TOOL HOLDER

TURET LATHE TOOL HOLDER

  • West Point, Pennsylvania, United States
  • Jan 30th
C8 COLLET 5/8 dia with pin lock for welden shank - new

C8 COLLET 5/8 dia with pin lock for welden shank - new

  • Farmington, Michigan, United States
  • Jan 30th
No. 9 Cushman Chuck

No. 9 Cushman Chuck

  • New Haven, Indiana, United States
  • Jan 30th
12" HOWA HYDRAULIC 3-JAW CHUCK

12" HOWA HYDRAULIC 3-JAW CHUCK

  • Fort Mill, South Carolina, United States
  • Jan 30th
10" KITAGAWA BB-210 HYDRAULIC TAKE-OFF CHUCK (#1)

10" KITAGAWA BB-210 HYDRAULIC TAKE-OFF CHUCK (#1)

  • Fort Mill, South Carolina, United States
  • Jan 30th
Jacobs Keyless Chuck 33364 JK 130 J33 Industrial Grade 1.0 to 13.0 Millimeter

Jacobs Keyless Chuck 33364 JK 130 J33 Industrial Grade 1.0 to 13.0 Millimeter

  • Fond du Lac, Wisconsin, United States
  • Jan 30th
US Tool Cone Jaw Chuck TP57

US Tool Cone Jaw Chuck TP57

  • Pensacola, Florida, United States
  • Jan 30th
4" LATHE FACE PLATE, CAST IRON, 3/4"-16 Threaded for Wood Bowl Turning NEW

4" LATHE FACE PLATE, CAST IRON, 3/4"-16 Threaded for Wood Bowl Turning NEW

  • Jacksonville, Florida, United States
  • Jan 30th
Buck 6", 6 Jaw Adjust-Tru, D1-3 Lathe chuck

Buck 6", 6 Jaw Adjust-Tru, D1-3 Lathe chuck

  • Eugene, Oregon, United States
  • Jan 30th
CUSHMAN 12" 4-JAW LATHE CHUCK L1 MOUNT

CUSHMAN 12" 4-JAW LATHE CHUCK L1 MOUNT

  • Wadley, Alabama, United States
  • Jan 30th
No. 11-20 Blanchard Rotary Surface Grinder - Grinding - 20" Dia. Magnetic Chuck

No. 11-20 Blanchard Rotary Surface Grinder - Grinding - 20" Dia. Magnetic Chuck

  • Ferndale, Michigan, United States
  • Jan 30th
CUSHMAN 8" 3 JAW LATHE CHUCK D1-3 MOUNT Self-Centering

CUSHMAN 8" 3 JAW LATHE CHUCK D1-3 MOUNT Self-Centering

  • Braintree, Massachusetts, United States
  • Jan 30th
LATHE CAMS FOR SETTING SOFT CHUCK JAWS BORING SOFT JAWS RAM PRODUCTS

LATHE CAMS FOR SETTING SOFT CHUCK JAWS BORING SOFT JAWS RAM PRODUCTS

  • Jamestown, New York, United States
  • Jan 30th
Jacobs Spindle Nose Chuck 91-C6 w/D1-6 Mount or D1-5 Adapter

Jacobs Spindle Nose Chuck 91-C6 w/D1-6 Mount or D1-5 Adapter

  • Cedar Rapids, Iowa, United States
  • Jan 30th
Hard Serrated Top Chuck Jaws Set OF 3, 2" wide 37/8" long Height 40MM Slot 21MM

Hard Serrated Top Chuck Jaws Set OF 3, 2" wide 37/8" long Height 40MM Slot 21MM

  • Milwaukee, Wisconsin, United States
  • Jan 30th
Jacobs Spindle Nose Chuck 91-A6 w/ 1 1/2" x 8 Threaded Mount

Jacobs Spindle Nose Chuck 91-A6 w/ 1 1/2" x 8 Threaded Mount

  • Cedar Rapids, Iowa, United States
  • Jan 30th
2MT Taper Shank To a #4 J.T. England Jacobs Chuck Arbor

2MT Taper Shank To a #4 J.T. England Jacobs Chuck Arbor

  • Mobile, Alabama, United States
  • Jan 30th
Union 3 jaw 1 1/2-8 chuck 5" 3 jaw lathe .0005 runout!!!

Union 3 jaw 1 1/2-8 chuck 5" 3 jaw lathe .0005 runout!!!

  • Brockport, New York, United States
  • Jan 30th

People who viewed this item also vieved

Gulledge Machine Works COLLET INDEX Head Machinist Tools Lathe

Gulledge Machine Works COLLET INDEX Head Machinist Tools Lathe

  • Oxnard, California, United States
  • Mar 7th
r8 7/16 collet

r8 7/16 collet

  • Springfield, Massachusetts, United States
  • Mar 7th
NICE SET OF 30 5C COLLETS 1/16" TO 1-1/8" W/ STAND HARDINGE DUNHAM SOUTH BEND

NICE SET OF 30 5C COLLETS 1/16" TO 1-1/8" W/ STAND HARDINGE DUNHAM SOUTH BEND

  • Ellington, New York, United States
  • Mar 7th
MACHINIST LATHE MILL Tool Makers Ground Hardened Set Up V Block Fixture lk

MACHINIST LATHE MILL Tool Makers Ground Hardened Set Up V Block Fixture lk

  • Morris Plains, New Jersey, United States
  • Mar 9th
MACHINIST LATHE MILL Tool Makers Ground Hardened Set Up V Block Fixture kl

MACHINIST LATHE MILL Tool Makers Ground Hardened Set Up V Block Fixture kl

  • Morris Plains, New Jersey, United States
  • Mar 9th
EROWA ITS 100 MOUNTING PLATE

EROWA ITS 100 MOUNTING PLATE

  • Perrysburg, Ohio, United States
  • Mar 9th
40pc Cleco 5/32" & 1/8" Wing Nut Pro Sheet Metal Riveting Clamp Fastener Lot

40pc Cleco 5/32" & 1/8" Wing Nut Pro Sheet Metal Riveting Clamp Fastener Lot

  • Romulus, Michigan, United States
  • Mar 10th
58 PIECE CLAMPING KIT (1/2 INCH SLOT; 3/8-16) (3900-0002)

58 PIECE CLAMPING KIT (1/2 INCH SLOT; 3/8-16) (3900-0002)

  • Chino, California, United States
  • Mar 10th
15PC Cleco Pneumatic Fastener Sheet Metal Riveting Clamp Installation Tool Lot

15PC Cleco Pneumatic Fastener Sheet Metal Riveting Clamp Installation Tool Lot

  • Romulus, Michigan, United States
  • Mar 10th
Drill Press Vise

Drill Press Vise

  • Enumclaw, Washington, United States
  • Mar 11th
Speed Vise Model 3B by Cardinal Machine CO Glendale California USA

Speed Vise Model 3B by Cardinal Machine CO Glendale California USA

  • Los Angeles, California, United States
  • Mar 11th
VULCAN No.4 chain strap pipe vice 1/2"-8" J.H. Williams & Co. EXCELLENT COND

VULCAN No.4 chain strap pipe vice 1/2"-8" J.H. Williams & Co. EXCELLENT COND

  • Otis, Oregon, United States
  • Mar 11th
Vintage Small Metal Turning lathe,Hobby Shop,5" swing,15" btwn centers,36"long

Vintage Small Metal Turning lathe,Hobby Shop,5" swing,15" btwn centers,36"long

  • Harrington, Maine, United States
  • May 22nd
MOTORIZED SMALL BENCH CENTER MACHINIST JIG FIXTURE RUNS NO BELT

MOTORIZED SMALL BENCH CENTER MACHINIST JIG FIXTURE RUNS NO BELT

  • Waterford, Michigan, United States
  • May 23rd
LOT OF 3 INTERCHANGEBLE BULL NOSE CENTER NOSE PIECES

LOT OF 3 INTERCHANGEBLE BULL NOSE CENTER NOSE PIECES

  • Ellington, New York, United States
  • May 23rd
Enerpac Hydraulic Gauge GCF-10S NEW

Enerpac Hydraulic Gauge GCF-10S NEW

  • Chicago, Illinois, United States
  • May 27th
Enerpac Hydraulic Cylinder RAM RD-256 NEW

Enerpac Hydraulic Cylinder RAM RD-256 NEW

  • Chicago, Illinois, United States
  • May 27th
Enerpac Hydraulic Clamping Cylinder SPL-1988-WO (RWL-1)

Enerpac Hydraulic Clamping Cylinder SPL-1988-WO (RWL-1)

  • Chicago, Illinois, United States
  • May 27th
2-9/16 CAPACITY PRECISION V-BLOCK & CLAMP SET 4-1/8 X 4-1/8 X 3-1/16 (3402-0003)

2-9/16 CAPACITY PRECISION V-BLOCK & CLAMP SET 4-1/8 X 4-1/8 X 3-1/16 (3402-0003)

  • Chino, California, United States
  • Jun 1st
6F78 8300 LATHE TOOL TURRET BLOCK CNC LOC1822

6F78 8300 LATHE TOOL TURRET BLOCK CNC LOC1822

  • Sidney, Ohio, United States
  • Jun 1st
LATHE TURRET BLOCK TOOL HOLDER CNC LOC1827

LATHE TURRET BLOCK TOOL HOLDER CNC LOC1827

  • Sidney, Ohio, United States
  • Jun 1st
CDS Cam Driven Rotary Indexer

CDS Cam Driven Rotary Indexer

  • Holland, Ohio, United States
  • Jun 1st
Pratt & Whitney 24" Motorized Rotary Table

Pratt & Whitney 24" Motorized Rotary Table

  • Kalida, Ohio, United States
  • Jun 1st
Yuasa 4th 5th Axis CNC Tilt Rotary Table UTRT-320 Yuasa UNDC-M2 Program Control

Yuasa 4th 5th Axis CNC Tilt Rotary Table UTRT-320 Yuasa UNDC-M2 Program Control

  • Vancouver, Washington, United States
  • Jun 1st
5C Collet Step Chuck 5" OD x 4" ID Heat Treated

5C Collet Step Chuck 5" OD x 4" ID Heat Treated

  • Lorain, Ohio, United States
  • Jun 6th
5C Collet Step Chuck 4" OD x 3-1/2" ID

5C Collet Step Chuck 4" OD x 3-1/2" ID

  • Lorain, Ohio, United States
  • Jun 6th
"Cubics Platina Single Pointed Needles 14""-Size 0/2mm"

"Cubics Platina Single Pointed Needles 14""-Size 0/2mm"

  • Hickory Hills, Illinois, United States
  • Jun 6th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies