+ Post new Ad
Manual Lathe Chucks Chuck Type: 4 jaw Independent Nominal Chuck Size: 10, US $1100 – Picture 0
Manual Lathe Chucks Chuck Type: 4 jaw Independent Nominal Chuck Size: 10, US $1100 – Picture 1
Manual Lathe Chucks Chuck Type: 4 jaw Independent Nominal Chuck Size: 10, US $1100 – Picture 0
Manual Lathe Chucks Chuck Type: 4 jaw Independent Nominal Chuck Size: 10, US $1100 – Picture 1

Manual Lathe Chucks Chuck Type: 4 Jaw Independent Nominal Chuck Size: 10

US $1100

  • Saint Peters, Missouri, United States
  • Jan 30th
Open on mobile:
QR code
We sell high-quality industrial surplus at discounted prices.  While we take every effort to inspect and test each item we sell, we do not have the capability to fully evaluate many of the items we sell.  All items are sold as is with no warranty (unless otherwise specified) and are non-returnable.  If you don’t see the answer you are looking for in our description or photos, PLEASE ask before purchasing.  pecs Manual Lathe Chucks; Chuck Type: Independent; Nominal Chuck Size: 10; Number of Jaws: 4; Adjustable (Yes/No): No; Mount: Plain Back; Through-Hole Diameter (Inch): 2-61/64 Chuck Type Independent Nominal Chuck Size 10 Number of Jaws 4 Adjustable (Yes/No) No Mount Plain Back Through-Hole Diameter (Inch) 2-61/64 Through-Hole Diameter (Decimal Inch) 2.9531 Body Material Cast Iron Number of Jaw Pieces One-Piece Reversible (Yes/No) Yes Chuck Diameter (Inch) 10 Jaw Height (Inch) 1-37/64 Jaw Height (Decimal Inch) 1.5781 Jaw Type Top Jaws Body Length (Inch) 3-5/32 Body Length (Decimal Inch) 3.1563 Overall Length (Decimal Inch) 4.7240 Includes Solid Reversible Jaws; T-Wrench
Condition New other (see details) :
A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
Seller Notes “appears to be new with no signs of damage, container not in tact.”

Directions

Similar products from Lathe Chucks

HARD JAWS FOR 3 JAW CHUCK 11/16" WIDE 4 TPI SET MODEL 660 MAX 5

HARD JAWS FOR 3 JAW CHUCK 11/16" WIDE 4 TPI SET MODEL 660 MAX 5

  • Jamestown, New York, United States
  • Jan 30th
4" NORTHFIELD STEEL POWER CHUCK JAWS 3 JAW 3/4" WIDTH PAIR PNEUMATIC

4" NORTHFIELD STEEL POWER CHUCK JAWS 3 JAW 3/4" WIDTH PAIR PNEUMATIC

  • Jamestown, New York, United States
  • Jan 30th
Auto Locking Hydraulic 8” 4 Jaw Self Center Lathe Chucks Hollow Flange Chucks

Auto Locking Hydraulic 8” 4 Jaw Self Center Lathe Chucks Hollow Flange Chucks

  • Beijing, China
  • Jan 30th
CUSHMAN INDUSTRIES 12" POWER CHUCK, A2-8 MOUNT F0-63729 1059012A08C CINTURN

CUSHMAN INDUSTRIES 12" POWER CHUCK, A2-8 MOUNT F0-63729 1059012A08C CINTURN

  • Buffalo, New York, United States
  • Jan 30th
NICE! SKINNER 10" 4 JAW LATHE CHUCK W/ 2-1/2-6 THREAD MOUNT #910I

NICE! SKINNER 10" 4 JAW LATHE CHUCK W/ 2-1/2-6 THREAD MOUNT #910I

  • Chino, California, United States
  • Jan 30th
NICE! BUCK ADJUST-TRU? 9" 3 JAW LATHE CHUCK W/ PLAIN BACK MOUNT #2093R

NICE! BUCK ADJUST-TRU? 9" 3 JAW LATHE CHUCK W/ PLAIN BACK MOUNT #2093R

  • Chino, California, United States
  • Jan 30th
CUSHMAN 7-1/2" 3 JAW LATHE CHUCK W/ PLAIN BACK MOUNT #734

CUSHMAN 7-1/2" 3 JAW LATHE CHUCK W/ PLAIN BACK MOUNT #734

  • Chino, California, United States
  • Jan 30th
R8 Bridgeport Indexable End Mill Mills 1 5/8"

R8 Bridgeport Indexable End Mill Mills 1 5/8"

  • Columbus, Ohio, United States
  • Jan 30th
6" Bison 6 Jaw "Set Tru" Lathe Chuck + Adapter Plate

6" Bison 6 Jaw "Set Tru" Lathe Chuck + Adapter Plate

  • Columbus, Ohio, United States
  • Jan 30th
Baileigh Ornametal Universal Scroll Bar Bender MPB-10

Baileigh Ornametal Universal Scroll Bar Bender MPB-10

  • Columbus, Ohio, United States
  • Jan 30th
JACOBS 33 TAPER CHUCK

JACOBS 33 TAPER CHUCK

  • Toledo, Ohio, United States
  • Jan 30th
STANDARD SQUARE 3/4" CHUCK T-WRENCH

STANDARD SQUARE 3/4" CHUCK T-WRENCH

  • Chino, California, United States
  • Jan 30th
NICE! 7-1/2" 3 JAW LATHE CHUCK W/ PLAIN BACK MOUNT

NICE! 7-1/2" 3 JAW LATHE CHUCK W/ PLAIN BACK MOUNT

  • Chino, California, United States
  • Jan 30th
WOW!! BUCK 7-1/2" 3 JAW SCROLLING LATHE CHUCK W/ PLAIN BACK MOUNT #2073

WOW!! BUCK 7-1/2" 3 JAW SCROLLING LATHE CHUCK W/ PLAIN BACK MOUNT #2073

  • Chino, California, United States
  • Jan 30th
5c Collet Air chuck Eagle Rock w/Switches

5c Collet Air chuck Eagle Rock w/Switches

  • West Chicago, Illinois, United States
  • Jan 30th
SKINNER 10-3/4" 3 JAW LATHE CHUCK W/ PLAIN BACK MOUNT #3410

SKINNER 10-3/4" 3 JAW LATHE CHUCK W/ PLAIN BACK MOUNT #3410

  • Chino, California, United States
  • Jan 30th
NICE! CUSHMAN 8-1/4" 3 JAW LATHE CHUCK W/ L1 MOUNT #8234B

NICE! CUSHMAN 8-1/4" 3 JAW LATHE CHUCK W/ L1 MOUNT #8234B

  • Chino, California, United States
  • Jan 30th
Metal Lathe Chuck,union 3 Jaw Chuck Will Fit South Bend 9" Lathe

Metal Lathe Chuck,union 3 Jaw Chuck Will Fit South Bend 9" Lathe

  • Bennington, New Hampshire, United States
  • Jan 30th
200mm Or About 8" POLAND 3-Jaw Lathe Chuck D1-6 Mount, PUUm-S 8D6ZD

200mm Or About 8" POLAND 3-Jaw Lathe Chuck D1-6 Mount, PUUm-S 8D6ZD

  • Lake Village, Indiana, United States
  • Jan 30th
2 SETS OF 3 SMW CHUCK JAWS

2 SETS OF 3 SMW CHUCK JAWS

  • Franklin Park, Illinois, United States
  • Jan 30th

People who viewed this item also vieved

HARDINGE COLLETS FOR LATHES, MILLS, GRINDERS & FIXTURES CATALOG 1995

HARDINGE COLLETS FOR LATHES, MILLS, GRINDERS & FIXTURES CATALOG 1995

  • Johnstown, Pennsylvania, United States
  • Mar 8th
MORRIS SDH28-PLUG TOOLHOLDER ADAPTER QUICK CHANGE

MORRIS SDH28-PLUG TOOLHOLDER ADAPTER QUICK CHANGE

  • United States
  • Mar 8th
Hardinge, B&S Taper Collets

Hardinge, B&S Taper Collets

  • Memphis, Tennessee, United States
  • Mar 8th
Bessey No. GRZ 20 Paralllel Grips Clamps of Two hand tools metalworking #

Bessey No. GRZ 20 Paralllel Grips Clamps of Two hand tools metalworking #

  • United States
  • Mar 12th
Parallel Clamps, (2) Machinist / Tool Maker Parallel Clamps, Open to 2-1/4 & 3"

Parallel Clamps, (2) Machinist / Tool Maker Parallel Clamps, Open to 2-1/4 & 3"

  • Saunderstown, Rhode Island, United States
  • Mar 12th
EXTENDED CAM ACTION CLAMP Stud Thread Size: 1/2-13

EXTENDED CAM ACTION CLAMP Stud Thread Size: 1/2-13

  • Rego Park, New York, United States
  • Mar 12th
ANGLE PLATE 8x6x6 * Large Vintage Made In Japan 90 Degree Angle Plate Machinest

ANGLE PLATE 8x6x6 * Large Vintage Made In Japan 90 Degree Angle Plate Machinest

  • Seekonk, Massachusetts, United States
  • Mar 12th
PALMGREN 1 1/2" PNEUMATIC VISE air operated clamping fixture drill mill jig

PALMGREN 1 1/2" PNEUMATIC VISE air operated clamping fixture drill mill jig

  • Milroy, Indiana, United States
  • Mar 12th
MACHINIST LATHE MILL Machinist Ground & Hardened Angle Plate for Set Up

MACHINIST LATHE MILL Machinist Ground & Hardened Angle Plate for Set Up

  • Morris Plains, New Jersey, United States
  • Mar 12th
Prismatic Vise Jaw For 4" Cross Slide Vise

Prismatic Vise Jaw For 4" Cross Slide Vise

  • Traer, Iowa, United States
  • Mar 12th
Machine Vice (Myford)

Machine Vice (Myford)

  • Greater West Sydney NSW, Australia
  • Mar 25th
panavise 301

panavise 301

  • Lakewood, New Jersey, United States
  • Mar 25th
NEW IN BOX DEAD CENTER J-10 TAPER, CARBIDE TIPPED JARNO TAPER

NEW IN BOX DEAD CENTER J-10 TAPER, CARBIDE TIPPED JARNO TAPER

  • West Point, California, United States
  • Jun 3rd
Royal Products Standard Dead Center Morse Taper 5, 8 1/2" Long

Royal Products Standard Dead Center Morse Taper 5, 8 1/2" Long

  • Glendale, California, United States
  • Jun 4th
NICE ROYAL 3MT CNC LIVE CENTER

NICE ROYAL 3MT CNC LIVE CENTER

  • El Monte, California, United States
  • Jun 4th
0 - 12" Double Beam Height Gage with Counter

0 - 12" Double Beam Height Gage with Counter

  • South Hackensack, New Jersey, United States
  • May 28th
0 - 24" / 0 - 600mm Vernier Height Gages

0 - 24" / 0 - 600mm Vernier Height Gages

  • South Hackensack, New Jersey, United States
  • May 28th
0 - 18" / 0 - 450mm Vernier Height Gages

0 - 18" / 0 - 450mm Vernier Height Gages

  • South Hackensack, New Jersey, United States
  • May 28th
HAAS S5C HA5C 14 PIN INDEXER AND RED SERVO CONTROLLER

HAAS S5C HA5C 14 PIN INDEXER AND RED SERVO CONTROLLER

  • Lowell, Massachusetts, United States
  • Jun 2nd
Yuasa CNC Rotary Indexer with Programmable Controller

Yuasa CNC Rotary Indexer with Programmable Controller

  • Lombard, Illinois, United States
  • Jun 2nd
NIKKEN KOSAKUSHO CNC-400 VF 16" 4th-AXIS HORIZONTAL/VERTICAL POWER ROTARY TABLE

NIKKEN KOSAKUSHO CNC-400 VF 16" 4th-AXIS HORIZONTAL/VERTICAL POWER ROTARY TABLE

  • Buffalo, New York, United States
  • Jun 2nd
L.S. Starrett No. 278 v-blocks and clamps

L.S. Starrett No. 278 v-blocks and clamps

  • Rochester, New York, United States
  • Jun 2nd
Hertel - 3/4 Inch Diameter, 1-1/2 Inch Length of Cut, 4 Flutes, End Mill "NICE"

Hertel - 3/4 Inch Diameter, 1-1/2 Inch Length of Cut, 4 Flutes, End Mill "NICE"

  • Portland, Oregon, United States
  • Jun 2nd
Machinist V Block, APPROX. 4" x 2-3/4" x 2-3/4"

Machinist V Block, APPROX. 4" x 2-3/4" x 2-3/4"

  • Clinton Township, Michigan, United States
  • Jun 2nd
JW Winco A40626 Black Finish Steel Adjustable Pin-Type Face Spanner for Round

JW Winco A40626 Black Finish Steel Adjustable Pin-Type Face Spanner for Round

  • USA, United States
  • Jun 7th
"Bamboo Single Pointed Needles 13""-Size 1.5/2.5mm"

"Bamboo Single Pointed Needles 13""-Size 1.5/2.5mm"

  • Hickory Hills, Illinois, United States
  • Jun 7th
DA-400 Double Angle Collet Chuck 1-3/4" Straight Shank 7-3/4" OAL

DA-400 Double Angle Collet Chuck 1-3/4" Straight Shank 7-3/4" OAL

  • Lorain, Ohio, United States
  • Jun 7th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies