+ Post new Ad
Maritool BT30 1/4 END MILL TOOL HOLDER .250-1.75, US $120 – Picture 0
Maritool BT30 1/4 END MILL TOOL HOLDER .250-1.75, US $120 – Picture 0

Maritool Bt30 1/4 End Mill Tool Holder .250-1.75

US $120

  • Lincoln, Nebraska, United States
  • Nov 18th
Open on mobile:
QR code
This tool holder accepts all .250 shank tooling All critical tool holder surfaces precision ground Made from alloy steel hardened to 54 - 56rc Balanced to G2.5 at 20,000 rpms Gage length is 1.75 inches Concentricity is less than .0001 Rear thread for pull stud is M12 X 1.75 MariTool Part# is BT30-EM.250-1.75 Product Specifications Balance Spec:  G2.5 @ 20,000 rpms Concentricity:  < .0001 Finish:  Black Oxide Gage Length:  1.75 Material:  Hardened Alloy Steel Rear Thread:  M12 x 1.75 Shank Size:  .250 Taper:  BT30

Directions

Similar products from BT Tool Holders

BT40 HOLDER W/ JACOBS 14N SUPER BALL BEARING DRILL CHUCK BT 40 LOT C15175

BT40 HOLDER W/ JACOBS 14N SUPER BALL BEARING DRILL CHUCK BT 40 LOT C15175

  • Dayton, Ohio, United States
  • Nov 20th
Sandvik Coromant BT40 Tool Holder, 392.55EH-40 12 054

Sandvik Coromant BT40 Tool Holder, 392.55EH-40 12 054

  • Berlin, Connecticut, United States
  • Nov 19th
4 TECNARA, TECHNIKS, YG CNC BT40 ENDMILL TOOLHOLDERS - 1/8&#034;, 1/2&#034;, 3/4&#034;, 1&#034;

4 TECNARA, TECHNIKS, YG CNC BT40 ENDMILL TOOLHOLDERS - 1/8", 1/2", 3/4", 1"

  • Covina, California, United States
  • Nov 19th
BT35 BILZ #1 STYLE COMPRESSION TENSION TAPPER W/ 2 TAP COLLETS 1/4 &amp; 5/16 C15093

BT35 BILZ #1 STYLE COMPRESSION TENSION TAPPER W/ 2 TAP COLLETS 1/4 & 5/16 C15093

  • Dayton, Ohio, United States
  • Nov 19th
BT35 BILZ #1 STYLE COMPRESSION TENSION TAPPER W/ 2 TAP COLLETS 5/16 &amp; 3/8 C15094

BT35 BILZ #1 STYLE COMPRESSION TENSION TAPPER W/ 2 TAP COLLETS 5/16 & 3/8 C15094

  • Dayton, Ohio, United States
  • Nov 19th
BT35 BILZ #1 STYLE COMPRESSION TENSION TAPPER W/ 2 TAP COLLETS 1/4 &amp; 5/16 C15092

BT35 BILZ #1 STYLE COMPRESSION TENSION TAPPER W/ 2 TAP COLLETS 1/4 & 5/16 C15092

  • Dayton, Ohio, United States
  • Nov 19th
KennaMetal Chuck For Collet #BT40-TG100-150-M

KennaMetal Chuck For Collet #BT40-TG100-150-M

  • Florence, Alabama, United States
  • Nov 19th
NIKKEN BT50-WE 3/4-75 TOOL HOLDER

NIKKEN BT50-WE 3/4-75 TOOL HOLDER

  • Robertsdale, Alabama, United States
  • Nov 18th
KENNAMETEL BT50TG150160M TOOL HOLDER

KENNAMETEL BT50TG150160M TOOL HOLDER

  • Robertsdale, Alabama, United States
  • Nov 18th
Maritool BT30 1/2 END MILL TOOL HOLDER .500-1.2

Maritool BT30 1/2 END MILL TOOL HOLDER .500-1.2

  • Lincoln, Nebraska, United States
  • Nov 18th
4 TECNARA, TECHNIKS, NC, YMZ CNC BT40 ENDMILL TOOLHOLDERS - 1/8, 3/8, 1/2, 3/4

4 TECNARA, TECHNIKS, NC, YMZ CNC BT40 ENDMILL TOOLHOLDERS - 1/8, 3/8, 1/2, 3/4

  • Covina, California, United States
  • Nov 18th
4 TECNARA, LYNDEX, YMZ CNC BT40 ENDMILL TOOLHOLDERS - 5/16&#034;, 3/8&#034;, 1/2&#034;, 3/4&#034;

4 TECNARA, LYNDEX, YMZ CNC BT40 ENDMILL TOOLHOLDERS - 5/16", 3/8", 1/2", 3/4"

  • Covina, California, United States
  • Nov 18th
SYIC-16284 BT50XER32-15.0 TOOL HOLDER

SYIC-16284 BT50XER32-15.0 TOOL HOLDER

  • Robertsdale, Alabama, United States
  • Nov 18th
BT50 ER32X150 TOOL HOLDER

BT50 ER32X150 TOOL HOLDER

  • Robertsdale, Alabama, United States
  • Nov 18th
NOS ERICKSON TG100 COLLET FOR 5/16&#034; TAP 100TGST031

NOS ERICKSON TG100 COLLET FOR 5/16" TAP 100TGST031

  • Cleveland, Ohio, United States
  • Nov 17th
2 PCS. UN-USED HARDINGE BT 40 TAPER ER16 COLLET CHUCK STOCK #F86/87

2 PCS. UN-USED HARDINGE BT 40 TAPER ER16 COLLET CHUCK STOCK #F86/87

  • Cleveland, Ohio, United States
  • Nov 17th
CP912 / CP913 JACOBS RUBBER FLEX BACKING PLUG 1/4&#034;-3/8&#034; &amp; 3/8&#034; - 1/2&#034;

CP912 / CP913 JACOBS RUBBER FLEX BACKING PLUG 1/4"-3/8" & 3/8" - 1/2"

  • Cleveland, Ohio, United States
  • Nov 17th
CP913 / CP914 JACOBS RUBBER FLEX BACKING PLUG 3/8&#034; - 1/2&#034; &amp; 1/2&#034; - 5/8&#034;

CP913 / CP914 JACOBS RUBBER FLEX BACKING PLUG 3/8" - 1/2" & 1/2" - 5/8"

  • Cleveland, Ohio, United States
  • Nov 17th
CP914 / CP915 JACOBS RUBBER FLEX BACKING PLUG 1/2&#034; - 5/8&#034; &amp; 5/8&#034; - 3/4&#034;

CP914 / CP915 JACOBS RUBBER FLEX BACKING PLUG 1/2" - 5/8" & 5/8" - 3/4"

  • Cleveland, Ohio, United States
  • Nov 17th
CP918 / CP919 JACOBS RUBBER FLEX BACKING PLUG 1&#034; - 1-1/8&#034; &amp; 1-1/8&#034; - 1-1/4&#034;

CP918 / CP919 JACOBS RUBBER FLEX BACKING PLUG 1" - 1-1/8" & 1-1/8" - 1-1/4"

  • Cleveland, Ohio, United States
  • Nov 17th

People who viewed this item also vieved

Sandvik Varilock A391.18-09 50 070M Balas Collet Chuck 50 Mount

Sandvik Varilock A391.18-09 50 070M Balas Collet Chuck 50 Mount

  • Kissimmee, Florida, United States
  • Jan 30th
3/4&#034; Lathe Tool Holder Bushing 1-1/4&#034; OD C Style Global CNC 86-12C Machined NeW

3/4" Lathe Tool Holder Bushing 1-1/4" OD C Style Global CNC 86-12C Machined NeW

  • Baldwin City, Kansas, United States
  • Jan 30th
WOHLHAUPTER UPA3 3/4&#034; SHANK 90 DEGREE ARM, &amp; BORING BAR.

WOHLHAUPTER UPA3 3/4" SHANK 90 DEGREE ARM, & BORING BAR.

  • San Clemente, California, United States
  • Jan 30th
1 NEW TOP NOTCH 5/8&#034;SH. CARBIDE BORING BAR. W/ 5 KENNAMETAL NTP2L INSERT {C957}

1 NEW TOP NOTCH 5/8"SH. CARBIDE BORING BAR. W/ 5 KENNAMETAL NTP2L INSERT {C957}

  • Mentor, Ohio, United States
  • Jan 30th
LOT 2 NEW MONDINI 71CA107003B0 MECHANICAL BUSHING POLY NYLON 25X18X25MM B255292

LOT 2 NEW MONDINI 71CA107003B0 MECHANICAL BUSHING POLY NYLON 25X18X25MM B255292

  • Buffalo, New York, United States
  • Jan 30th
LOT 3 NEW BROWNING P2-1 7/16 SPLIT TAPER BUSHING 1-7/16IN BORE D301803

LOT 3 NEW BROWNING P2-1 7/16 SPLIT TAPER BUSHING 1-7/16IN BORE D301803

  • Delta, Ohio, United States
  • Jan 30th
SDL-8-3 Toolholder Seco Brand 1/2&#034; Sq x 3.2&#034; Cutoff OAL

SDL-8-3 Toolholder Seco Brand 1/2" Sq x 3.2" Cutoff OAL

  • Trenton, Michigan, United States
  • Jan 30th
50MM-VF2.406-SM12 CAT 50 Facemill Holder Sandvik Brand 1pc

50MM-VF2.406-SM12 CAT 50 Facemill Holder Sandvik Brand 1pc

  • Trenton, Michigan, United States
  • Jan 30th
41BA 0-3/8 Jacobs Chuck 1/2-20 thd

41BA 0-3/8 Jacobs Chuck 1/2-20 thd

  • Norwalk, California, United States
  • Jan 30th
16N Jacobs Super Bearing Chuck 5/8

16N Jacobs Super Bearing Chuck 5/8

  • Norwalk, California, United States
  • Jan 30th
WAUKESHA COR-BOR-DRILL R200-0056-F

WAUKESHA COR-BOR-DRILL R200-0056-F

  • Wadley, Alabama, United States
  • Jan 30th
Allied Machine And Engineering 25005h - 075f - Spade Drill Holder 39/64 -11/16

Allied Machine And Engineering 25005h - 075f - Spade Drill Holder 39/64 -11/16

  • Rogers, Ohio, United States
  • Jan 30th
SUNNEN 2G-P28-1062VA HONING MANDREL 1-1/16?

SUNNEN 2G-P28-1062VA HONING MANDREL 1-1/16?

  • Rancho Cucamonga, California, United States
  • Jan 30th
SUNNEN 2G-P28-1750WE HONING MANDREL

SUNNEN 2G-P28-1750WE HONING MANDREL

  • Rancho Cucamonga, California, United States
  • Jan 30th
600 KG Steel Magnetic Lifter Heavy Duty Crane Hoist Lifting Magnet 1320lb

600 KG Steel Magnetic Lifter Heavy Duty Crane Hoist Lifting Magnet 1320lb

  • Scarborough, Ontario, Canada
  • Jan 30th
100 KG Steel Magnetic Lifter Heavy Duty Crane Hoist Lifting Magnet 220lb

100 KG Steel Magnetic Lifter Heavy Duty Crane Hoist Lifting Magnet 220lb

  • Scarborough, Ontario, Canada
  • Jan 30th
KWIK SWITCH 400 1/2&#034; DIAMETER ENDMILL HOLDER 80443 END MILL LOT C10706

KWIK SWITCH 400 1/2" DIAMETER ENDMILL HOLDER 80443 END MILL LOT C10706

  • Dayton, Ohio, United States
  • Jan 30th
KWIK SWITCH 400 1&#034; DIA ENDMILL HOLDER UNIVERSAL ENG 80447 END MILL LOT C10606

KWIK SWITCH 400 1" DIA ENDMILL HOLDER UNIVERSAL ENG 80447 END MILL LOT C10606

  • Dayton, Ohio, United States
  • Jan 30th
MOORE TOOL CO. JIG GRINDING HEAD

MOORE TOOL CO. JIG GRINDING HEAD

  • Howell, Michigan, United States
  • Jan 30th
8 units Setco Motor Spindle 1.5 Horse Power 230/460 3 Phase 3600 RPM Air Purge

8 units Setco Motor Spindle 1.5 Horse Power 230/460 3 Phase 3600 RPM Air Purge

  • Santa Ana, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies